Plains Pistol , .54 caliber, 8" barrel, percussion, walnut, brass, new, unfired, by Investarm Stocked in walnut, with 15/16" octagon barrel with hooked breech, color hardened percussion lock, and brass triggerguard. This Plains Pistol has the classic 1830 era bag butt architecture. This is a very comfortable grip, large enough for man sized hands, with enough drop and curve to make aiming as instinctive as pointing your finger. The pistol i       INV-GPP-54 . . . $379.00

Build Track's Jim Bridger's Hawken rifle , right hand, 1-1/8" tapered octagon barrel Price: starting at $1,125.16 Build Track's Jim Bridger's Hawken Rifle kit, 1-1/8" tapered octagon 36" barrel, traditional iron, or fancy brass trim, maple stock Track's very best Jim Bridger's Hawken Rifle parts were selected by the well respected gunmaker, Michael Hayes of Park Rapids, MN, who built the fine rifle with tapered octagon barrel, shown above. Stocked in curly

Gunsmithing Labor : install breech plug, fitted inside Our gunsmith will install a breech plug we offer, in a barrel we offer, with the front face of the breech plug tightly sealed against the inside shoulder of the breech thread, and the barrel maker's name (if any) indexed to the bottom flat. Threads are lubricated with Birchwood Casey's Choke Tube Lube anti-seize, so the plug may be removed, even af       LABOR-BP . . . $30.00

Handles, for bullet mold , LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks. Handles, for bullet mold , LEE Commercial mold handles, fit Lyman, RCBS and similar mold blocks, and also LEE multi-cavity molds. Notice the geometry of the inner jaws, at the mounting screw holes. The slight angle allows both large and small Lyman molds to align perfectly. Considering the low cost, long length for leverage, and cool comfortable o       LEE-HANDLE . . . $23.59

Build Track's H. E. Leman Trade Rifle parts set , 15/16" or 1" octagon, up to 42" barrel, flintlock, single or double set triggers, traditional brass with iron buttplate Price: starting at $934.28 Build a replica H. E. Leman Trade Rifle , using Track's best parts. Options include choice of caliber, plain or fancy curly maple, furniture is the traditional brass with iron buttplate, single or double set triggers, and a L&R late English flintlock. The term TRADE RIFLE indicated a rifle made for the trade , to be sold by a gun merchant, hardware

Nipple Wrench for Revolvers , for .36 & .44 Colt Army & Navy Models, and other revolvers with a large nipple recess. Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! #NW-140 wrench has a .187" slot in a .34" shaft, to fit       NW-140 . . . $9.99

Round Ringed Ramrod pipes, for 7/16" rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are round, with decorative rings, for 7/16" ramrod, in your choice of wax cast brass or iron (steel). Made for use on fullstock French fusils, muskets, and fowling guns. French fusils were most often trimmed in iron, while more costly fusil fin (fine fusils) were often trimmed in brass. English

Wedding Band Ramrod Pipes , for 3/8" rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are round with wedding band at center, for 3/8" ramrod, in your choice of brass or iron (steel), for fullstock. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-1/4" length, about 2-8/8" overall, including the skirt. Your choice of wax cast brass or steel. Us

Double Ringed Ramrod pipes, for 3/8'' rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are round with double rings, for 3/8" ramrod, in your choice of brass or iron (steel), for fullstock. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-5/8" length, about 3-5/8" overall, including the skirt. Your choice of wax cast brass or steel. Use our #PIN

Jaeger Ramrod Pipes , bulbous, for 3/8" rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are round with bulbous rings, for 3/8" ramrod, in your choice of brass or iron (steel), for fullstock or halfstock. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-1/2" length, about 3-1/4" overall, including the skirt. Your choice of wax cast brass or steel

Fowler or Fusil Ramrod Pipes, Round , polished brass or iron Shown in side view, and top view, these fusil or fowler ramrod pipes are unadorned, for your choice of 5/16" or 3/8" ramrod, available in your brass or iron, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on fusils or fowlers, these are ideal for use on many of our Pennsy

French Tulle Fusil-de-Chasse Ramrod Pipes, for 3/8'' rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are shaped, with delicate ringed ends. Designed to accept a 3/8" diameter ramrod as cast, in your choice of brass or iron (steel), for fullstock. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-3/8" length, about 3-1/2" overall, including the skirt. Your cho

French Fusil Ramrod Ripes , for 3/8'' rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are barrel shaped, with ringed ends, for 3/8" ramrod, in your choice of brass or iron (steel), for fullstock. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-5/8" length, about 3-5/8" overall, including the skirt. Your choice of wax cast brass or steel. Use

Stock, Thompson Center , fullstock pre shaped, pre-inlet, 1" barrel, Thompson Center lock, plain maple Convert your Thompson Center Hawken or Renegade rifle or kit to a fullstock, using all your existing parts and this new fullstock. Be sure to order an additional wedge key and underlug, if using wedge keys to retain the barrel. We recommend using two of our thinner #Key-58-I and two #UL-104-A lug staples for this fullstock conversion. Pre-inlet for       STK-TCF-16-M3 . . . $329.00

Tap handle , accepts #0 to #8 diameter taps Use this T-handle tap wrench, with our high carbon steel taps. It will accept taps from #0 to #8 in diameter in the recessed fingers in the jaws. Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps       TAP-W-0 . . . $7.99

Tap handle , accepts #10 to 1/4" diameter taps Use this T-handle tap wrench, with our high carbon steel taps. It will accept taps from #10 to 1/4" in diameter. Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken th       TAP-W-10 . . . $9.99

Tap handle , accepts 1/4" to 1/2" diameter taps Use this T-handle tap wrench, with our high carbon steel taps. It will accept taps from 1/4" to 1/2" in diameter. Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken t       TAP-W-14 . . . $11.99

Build Track's John & Caleb Vincent, Ohio halfstock rifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $926.81 An 1840 - 1860 vintage Ohio halfstock rifle, in the style of John and Caleb Vincent, signed by talented gunsmith J. Eddie Brown. The highly figured maple stock has been stained to best reveal the stripe and figure. The figure and the reddish undertone combine to make this rifle very appealing to the eye. The classic Vincent style scroll surrounding

Antique European Fowling Gun , .59 caliber smoothbore, 33-3/4" swamped octagon barrel, reconverted flintlock, checkered walnut, bras & iron trim This antique European fowler appears to have Germanic origins. The walnut stock has a checkered wrist and scattered handling marks from decades of use. The stock has raised carving around the tang and a cheek piece for a right hand shooter. The triggerguard has been replaced with a modern brass triggerguard. The lock has been reconverted to flintlo       AAV-328 . . . $2,999.00

Kentucky Pistol , .50 caliber 8-1/2" octagon-to-round barrel, small Queen Anne flintlock, walnut, brass furniture, appears as-new This Kentucky pistol is stocked in black walnut, with a warm brown tone. This pistol is trimmed in neatly fitted brass Georgian style furniture that appears to be from the late William Kennedy. A few Colonial American makers produced pistols with Georgian style furniture, such as J.P. Beck from Lancaster, Pennsylvania. The brass furniture has a sat       AAV-551 . . . $2,599.00

Kentucky Pistol , .54 caliber, 10-3/8" barrel, flintlock, maple stock, brass trim, as new with box, by Davide Pedersoli This attractive Kentucky pistol has a large grip, angled enough to provide perfect sight alignment, while it feels good in your hand. Manufactured by Davide Pedersoli & Company of Italy. The pistol is as-new with the factory box. The frizzen only has a few strikes on it from testing. Stocked in curly maple, the stock has scattered figure from muzzl       AAW-406 . . . $749.00

Maryland Longrifle , .40 caliber, 45-7/8" straight octagon barrel, L&R flintlock, curly maple, engraved nickel silver, used, signed by L. Bryner This Maryland style longrifle appears to have been influenced by the work of John Armstrong. Stocked in highly figured maple, stained to a golden brown tone, and trimmed in hand engraved nickel silver furniture with silver wire inlay. The straight octagon barrel is finished armoury bright and accented with hand engraving on the muzzle, breech and a       AAW-410 . . . $4,299.00

Kodiak Express Double Rifle , .54 caliber, 28" barrels, percussion, walnut, checkered pistol grip, used, by Davide Pedersoli Pedersoli Kodiak Express rifle, stocked in walnut. Barrels are 28" long, rifled in .54 caliber. Locks are engraved with color case hardened finish. The breeches are fitted with hardened steel nipples for No. 11 caps. The 13-1/2" and 14-1/4" length of pull should fit todays average shooter. The rifle weighs 10.8 pounds and is fitted with sling swive       AAW-441 . . . $1,349.00

Knife Sharpening Made Easy by Stefan Steigerwald & Peter Fronteddu The ideal guide for knifemakers, collectors, culinary professionals, and more, this book teaches multiple methods for making your blades as sharp as new -- or even sharper. Starting with the theoretical foundations and mechanics of sharpening a blade, the authors then provide step-by-step instructions for honing various types of knives with V-sharp       BOOK-KSME . . . $15.29

Bent inletting chisel, 1/4" blade, forged in the U.S.A. American made Gun Stock Maker's Chisels. Forged in the U. S. A. for gunmakers, these chisels are made of tempered 1095 high carbon spring steel. Hardened to produce a fine grain structure, 1095 steel has finer grain, greater hardness, and can be whetted to a sharper edge than steels which contain nickel or chrome. Each tool is individually hand gro       CHISEL-BC-14 . . . $13.99

has been added to your .

---