Ramrod pipe, brass , pistol entry pipe with skirt, octagon with ringed ends, for 5/16" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 7/8" length, about 1-3/4" overall, including the skirt. Wax cast brass. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock pistol.       RP-IH-PE-5-B . . . $18.99

Ramrod pipe, brass , pistol forward pipe with pin lug, octagon with ringed ends, for 5/16" ramrod Our forward pipe, with lug for pin , is 3/4" overall length. Made for a fullstock pistol (with wood extending to muzzle), most pistols use only one forward pipe. Use one, or sometimes two #PIN-3/32 steel dowel pins, to retain a brass pipe.       RP-IH-PF-5-B . . . $15.99

Ramrod pipe, brass , pistol forward pipe with pin lug, octagon with ringed ends, for 3/8" ramrod Our forward pipe, with lug for pin , is 3/4" overall length. Made for a fullstock pistol (with wood extending to muzzle), most pistols use only one forward pipe. Use one, or sometimes two #PIN-3/32 steel dowel pins, to retain a brass pipe.       RP-IH-PF-6-B . . . $15.99

Double Shotgun Ramrod Entry Pipe, for for 3/8" ramrod wax cast iron Shown in side view, and top view, this ramrod pipe is made for a 3/8" ramrod, in iron (steel) only. The iron pipe matches the L&R shotgun assembled triggers with plate.       RP-LR-DBLE-I . . . $24.00

Ramrod pipe, brass , forward pipe, with lug for pin, round, for 3/8" ramrod Shown in side view, and top view, our North West Trade Gun ramrod pipes are round, for 3/8" ramrod, brass only. Notice the impressed rings, forged into the thin brass pipes. These corrugations or embossed rings give the thin brass pipes extra strength, so they cannot be crushed in the field. The entry pipe (where rod enters the wood) is most ofte       RP-NW-F-6-B . . . $4.29

Ramrod pipe, iron , forward pipe, with lug for pin, round, for 3/8" ramrod Shown in side view, and top view, our North West Trade Gun ramrod pipes are round, for 3/8" ramrod, iron.. Notice the impressed rings, forged into the thin iron pipes. These corrugations or embossed rings give the thin iron pipes extra strength, so they cannot be crushed in the field. The entry pipe (where rod enters the wood) is most often omitt       RP-NW-F-6-I . . . $4.29

Ramrod pipe, brass , pistol forward pipe, plain for rib, round, for 5/16" ramrod Our forward pipe, without lug , mounts to the rib of a halfstock pistol or rifle. File a flat on the pipe, and a matching flat into the rib. Cut the rib deep enough to allow the ramrod to slide smoothly down the inside of the rib, and through the pipe. Tin both flats with solder, cool, clamp in place, then re-heat to sweat solder the two flats tog       RP-RH-PR-H-5-B . . . $6.99

Ramrod pipe, brass , pistol forward pipe, plain for rib, round, for 3/8" ramrod Our forward pipe, without lug , mounts to the rib of a halfstock pistol or rifle. File a flat on the pipe, and a matching flat into the rib. Cut the rib deep enough to allow the ramrod to slide smoothly down the inside of the rib, and through the pipe. Tin both flats with solder, cool, clamp in place, then re-heat to sweat solder the two flats tog       RP-RH-PR-H-6-B . . . $6.99

Creedmoor Vernier Tang Sight , for Mid Range competition, with 3" elevation, and windage adjustment This mid-range 3" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 4-.7mm moun       RS-CREED-3-E . . . $87.99

Creedmoor Vernier Tang Sight , for Mid Range competition, with 3" elevation and windage, plus true Vertical alignment This mid-range 3" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to sc       RS-CREED-3-WE . . . $105.99

Creedmoor Vernier Tang Sight , for Long Range competition, with 5" elevation, and windage adjustment This long-range 5" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 10-28 moun       RS-CREED-5-E . . . $105.99

Creedmoor Vernier Tang Sight , for Long Range competition, with 5" elevation and windage, plus true Vertical alignment This long-range 5" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to s       RS-CREED-5-WE . . . $105.99

Hadley Eye Disk , for Pedersoli 1874 Sharps Vernier Sights Blued steel, finished non-glare blue black, this Hadley eye disk is threaded 5-.5MM to fit the Vernier Tang Sight for Davide Pedersoli's 1874 Sharps rifle #RS-DP-1874, or the Soule rear sight #RS-DP-SOULE-4. The rim is knurled for easy insertion. Roll the small knurled wheel to select one of eight apertures. A small spring loaded ball detent locks       RS-DP-HADLEY . . . $119.00

Tang sight, Lyman No. 2 sight, for Henry Lever Action Rifles William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Henry lever action rifles. Lyman recommends this sight for the following models: H006 – Big Boy, Big Boy Carbine, Big Boy Silver H009 – All-Weather 30-30 H010 – All-Weather 45-70 H012 – Big Boy All W       RS-HENRY-2 . . . $112.99

Rear sight , semi-buckhorn for 15/16" or 1" barrels, Kit Carson's Hawken style This medium size version of our Kit Carson's Hawken rifle sight is intended for a barrel up to 1" octagon. Tall, to reduce heat mirage, the center notch is indicated. Wax cast steel, made in the U.S.A., the dovetail is about .370" long and .580" wide. Dovetail to a depth of .050". Height from the bottom of the dovetail to the top of the sight notch       RS-KC-16 . . . $8.99

Rear sight , semi-buckhorn up to 1-1/8" barrels, Jim Bridger's Hawken style This large version of our Kit Carson's Hawken rifle sight is intended for a barrel up to 1-1/8" octagon and is ideal for our Jim Bridger Hawken rifle parts. Tall, to reduce heat mirage, the center notch is indicated. Wax cast steel, made in the U.S.A., the dovetail is about .370" long and .625" wide. Dovetail to a depth of .050". Height from the bo       RS-KC-18 . . . $8.99

Rear sight , semi-buckhorn for barrels up to 15/16", Lyman Great Plains Rifle This fixed rear sight is intended for a barrel up to 15/16" octagon. Tall, to reduce heat mirage, a square center notch is cut .070" wide by 0.10" deep. Wax cast steel, made in the Italy., the dovetail is about .350" long and .625" wide by .055" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.45".       RS-LYMAN-GPR . . . $18.00

Brass Shot Shell , 8 gauge, 3-1/4", new production, marked PARKER BRO'S, MERIDEN, CT. use large pistol primer, each This new production all brass shotgun shell is designed for a 8 gauge shotgun with a 3-1/4" or longer chamber. This 8 gauge shot shell is manufactured to European CIP print dimensions. The head is engraved Parker Brothers Meriden, Conn. - 8 gauge A markings for a historic appearance. The 'A' designation indicates a 'thin wall' brass case that acc       SHOT-SHELL-08-3-14 . . . $14.99

Brass Shot Shell , 10 gauge, 2-5/8", new production, marked PARKER BRO'S, MERIDEN, CT. use large pistol primer, each This new production all brass shotgun shell is designed for a 10 gauge shotgun with a 2-5/8" or longer chamber. The head is engraved Parker Brothers Meriden, Conn. - 10 gauge A markings for a historic appearance. The 'A' designation indicates a 'thin wall' brass case that accepts 9 gauge wads for best compression. This all brass shotshell uses lar       SHOT-SHELL-10-2-58 . . . $8.99

Brass Shot Shell , 10 gauge, 2-7/8", new production, marked PARKER BRO'S, MERIDEN, CT. use large pistol primer, each This new production all brass shotgun shell is designed for a 10 gauge shotgun with a 2-7/8" or longer chamber, such as the famous Parker Brother's 10 gauge shotguns. The head is engraved Parker Brothers Meriden, Conn. - 10 gauge A markings for a historic appearance. The 'A' designation indicates a 'thin wall' brass case that accepts 9 gauge wads       SHOT-SHELL-10-2-78 . . . $9.59

Brass Shot Shell , 12 gauge, 2-1/2", new production, marked PARKER BRO'S, MERIDEN, CT. use large pistol primer, each This new production all brass shotgun shell is designed for a 12 gauge shotgun with a 2-1/2" or longer chamber. The head is engraved Parker Brothers Meriden, Conn. - 12 gauge A markings for a historic appearance. The 'A' designation indicates a 'thin wall' brass case that accepts 11 gauge wads for best compression. This all brass shot shell uses l       SHOT-SHELL-12-2-12 . . . $7.99

Brass Shot Shell , 12 gauge, 2-5/8", new production, marked PARKER BRO'S, MERIDEN, CT. use large pistol primer, each This new production all brass shotgun shell is designed for a 12 gauge shotgun with a 2-5/8" or longer chamber. The head is engraved Parker Brothers Meriden, Conn. - 12 gauge A markings for a historic appearance. The 'A' designation indicates a 'thin wall' brass case that accepts 11 gauge wads for best compression. This all brass shot shell uses l       SHOT-SHELL-12-2-58 . . . $8.29

Brass Shot Shell , 20 gauge, 2-1/2", new production, marked PARKER BRO'S, MERIDEN, CT. use large pistol primer, each This new production all brass shotgun shell is designed for a 20 gauge shotgun with a 2-1/2" or longer chamber. The head is engraved Parker Brothers Meriden, Conn. - 20 gauge A markings for a historic appearance. The 'A' designation indicates a 'thin wall' brass case that accepts 19 gauge wads for best compression. This all brass shot shell uses l       SHOT-SHELL-20-2-12 . . . $6.99

Snuff box, 2-3/4" round, polished brass, made in the U.S.A. A neatly made round box, of heavy brass, highly polished. The lid fits the base snugly, and is easily removed. About 1" deep, and nearly 2-3/4" diameter. Most brands of modern smokeless tobacco "snuff" (i.e. Copenhagen or Skoal) will fit neatly within this box, but our flint & steel fire striker will not fit. It is a nice large box for carrying an       SNUFF-BOX-B . . . $13.50

Snuff box, 2-3/4" round, polished copper, made in the U.S.A. A neatly made round box, of heavy copper, highly polished. The lid fits the base snugly, and is easily removed. About 1" deep, and nearly 2-3/4" diameter. Most brands of modern smokeless tobacco "snuff" (i.e. Copenhagen or Skoal) will fit neatly within this box, but our flint & steel fire striker will not fit. It is a nice large box for carrying a       SNUFF-BOX-C . . . $20.50

has been added to your .

---