Your search for 'steel'
returned
2,061 results.
|
Sideplate for your left hand Golden Age Longrifle , wax cast steel
This classic Golden Age sideplate is sized to fit a large Siler, or L&R Classic lock. Lock bolts holes are pre cast, drill for clearance to accept a 8-32 or 10-32 lock bolts. Lock bolts can have up to a 1/2" diameter head. Overall length 4-7/8", height 1", thickness 0.085".
|
|
Sideplate for a Jaeger or Fowler , wax cast steel
A wide early design for a Jaeger, longrifle, or smoothbore fowler. This large sideplate will fit the R.E. Davis Jaeger, or Chambers early Germanic locks among others. Lock bolt holes are cast in place and can be easily drilled for clearance to accept a 8-32 or 10-32 diameter lock bolt. Overall length 5-3/8", height 1-1/16", thickness 0.085".
|
|
Sideplate for a English Fowlers , wax cast steel
This attractive early sideplate will work well on fine fowlers. The two lock bolt holes are indicated, sized for Jim Chambers round face English, or Virginia fowler, Early Ketland, or R.E. Davis Tryon flintlocks. Overall length 5-15/16", height 1-1/16", thickness 0.085". A well finished brass example with hand engraved border and design,used on a E
|
|
Sideplate for our Jaeger Rifles , wax cast steel
Large ball end sideplate fits R.E. Davis Jaeger, Chamber's Christian Springs, Twigg, and similar large locks. Precast holes for front and rear lock bolts need to be drilled for clearance to accept a 8-32, or 10-32 lock bolt. Overall length 6-1/16", height 1-1/8", thickness 0.085".
|
|
Sideplate for L&R's Bailes Lock , wax cast steel
We offer this graceful small sideplate in both right and left hand. Upper edges are slightly beveled. Inlet this sideplate half depth. Use our bolts with 3/8" flat or domed heads which are not recessed. Holes are spaced for L&R's Bailes lock, drill pre cast holes for clearance to accept a 8-32 or 10-32 lock bolts. Overall length 4-5/8", height 7/8"
|
|
Sideplate for our Bedford County Rifles , wax cast steel
A right hand sideplate, correct for Bedford County and similar full-stock longrifles. Slightly beveled on upper edges, this sideplate is not made to be inlet flush, but only to half depth. Overall length 4-15/16", height 7/8", thickness 0.120". Holes are spaced for the popular L&R Bedford County flint or percussion lock. Download the appropriate .p
|
|
Swivel wide for forend, includes 6-40 screw, wax cast steel
The wide swivel mounts on the forend of the fullstock and should be positioned to rest against a ramrod pipe body. The screw should be installed through a underlug dovetailed into the bottom flat of the barrel such as a #UL-DH-1, sold separately. Uses a 6-40 screw, included with the swivel. Order #SCREW-UL-6-40, if you need a replacement. Swivel is
|
|
Swivel , early U shaped for forend, includes 6-40 mounting screw, wax cast steel
The "U" shaped swivel mounts on the forend of the fullstock and should ideally rest against a ramrod pipe to prevent blocking the ramrod channel. The screw should be installed through a underlug dovetailed into the bottom flat of the barrel such as a #UL-DH-1, sold separately. Uses a 6-40 screw, included with the swivel. Swivel is over 15/16" wide
|
|
Taps , high speed steel, 6-48 thread
Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal
|
|
Taps , high speed steel, 4-.70mm thread, for Italian tang sight screws
Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal to cut threads. Clearance Drills are large enough to allow the body of the bolt to pass through the hole. Tap Drill: for 4-.70
|
|
|
Taps , high speed steel, 6-.75mm thread
Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal to cut threads. Clearance Drills are large enough to allow the body of the bolt to pass through the hole. Tap Drill: for 6-.75
|
|
|
Taps , high speed steel, 6-1mm thread
Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal to cut threads. Clearance Drills are large enough to allow the body of the bolt to pass through the hole. Recommended Tap Drill
|
|
Triggerguard, J. Dubbs, Lehigh County wax cast steel
An Lehigh County style triggerguard patterned after a original Lehigh rifle. The bow swells to become wide at the center, and the ends have distinctly pointed finials with a feather design on the tail. The front finial and triggerguard bow have cast-in engraving. Overall length is 10-3/8", inside trigger bow is 2-1/8" long, and 1-1/8" deep.
|
|
Triggerguard, Early Longrifle , wax cast steel
This early triggerguard is ideal for a Jaeger or Transitional longrifle. The unfinished ends can easily be reshaped to many different styles. The front bow lug is ideal for sling swivels. Overall length is 9-5/16", inside trigger bow is 2-3/8" long, and 1" deep.
|
|
Triggerguard, Early Longrifle , wax cast steel
This early longrifle triggerguard has features more typically found on classic American longrifles of the 1750 - 1780 era. The front bow lug us ideal for a swivel. Use this triggerguard on a Andreas Albrecht rifle of Christian Springs, Pennsylvania. Overall length is 8-7/8", inside trigger bow is 2-5/16" long, and 1" deep.
|
|
Triggerguard Classic English Style , wax cast steel
A classic English triggerguard from a London made half-stock fowling gun or sporting rifle. The scroll-loop grip rail was used in the late flint and early percussion era. The bow is large enough for two triggers, but was intended for a single barrel gun. The English rarely used double set triggers, but was popular on German and American rifles. The
|
|
Triggerguard, Early French Design , wax cast steel
Our Fusil Fin (fine fusil) triggerguard is an early French design. Use this on an early fowling gun, buck and ball gun, or fine French fusil. T.M. Hamilton's book, Colonial Frontier Guns illustrates several similar triggerguards from extra fine quality fusil fin fowling guns and the French Type 'C' trade guns, made ar Tulle and St. Etienne. Overal
|
|
Triggerguard, French Type 'C' Trade Fusil , wax cast steel
Used on French Type 'C' trade fusils from 1680 until 1730, this triggerguard features a decorated finial which matches the buttplate's finial. Only slightly inlet this guard is retained by three pins, one ahead of the bow, and two behind, through the pin lugs provided. Overall length is 10-1/8", inside trigger bow is 2-1/4" long, and 7/8" deep.
|
|
Triggerguard, French Type 'D' Trade Fusil , wax cast steel
Used on French Type 'D' trade fusils from 1730 until 1763, this triggerguard is unusual. Its finial was not made to match the Type 'D' buttplate's finial. Mount triggerguard with three pins, or two pins and one screw. Overall length is 10-7/16", inside trigger bow is 2-1/8" long, and 1-3/16" deep.
|
|
Triggerguard, Late Hawken Half-Stock , wax cast steel
Our classic late Hawken triggerguard for half-stock rifles. Order an un-plated #Screw-5x40-f to retain the guard from inside the trigger plate into the rear loop. Thread the as-cast forward post 10-32. Overall length is 6-1/8", inside trigger bow is 2-7/16" long, and 1-5/16" deep.
|
|
Triggerguard, Late Hawken Half-Stock , wax cast steel
Our classic late Hawken triggerguard for half-stock rifles. Order an un-plated #Screw-5x40-f to retain the guard from inside the trigger plate into the rear loop. We recommend threading the forward post 1/4-28 to be threaded into the triggerplate. Overall length is 5-9/16", inside trigger bow is 2-3/16" long, and 1-3/16" deep.
|
|
Triggerguard, T/C Hawken Half-Stock , wax cast steel
A classic late Hawken triggerguard for half-stock rifles. Designed to be screwed in place rather than mounted in a traditional Hawken fashion. Order two of our un-plated screw-6x1/2, #SCREW-6x12, to retain this triggerguard. Overall length is 7-5/8", inside trigger bow is 2-1/2" long, and 1-5/16" deep.
|
|
Triggerguard, Jaeger Rifle , wax cast steel
This triggerguard features an asymmetric finial in the shape of an acanthus leaf . Our #BP-Jaeg-21 buttplate matches this design. The matching buttplate is pre-inlet into out acanthus leaf Jaeger rifle stock. Overall length is 10-5/8", inside trigger bow is 2-13/16" long, and 1-3/16" deep.
|
|
Triggerguard, Jaeger Rifle , wax cast steel
This triggerguard has a Baroque floral finial inspired by the famous French Fleur-de-lis motif. The large open bow is a perfect match for our #TR-Jaeger double set trigger with straight flat rear trigger. Jaeger rifle triggerguards were commonly attached with screws, especially at the rear. Overall length is 10", inside trigger bow is 4-1/4" long,
|