Your search for 'steel'
returned
2,061 results.
|
Sideplate for a Fowling Gun, Early Rifle, or Fusil , iron (wax cast steel)
This simple early sideplate has an attractive pointed tail. Long enough for larger flint locks, or shorten the front end for symmetry around the front lock bolt, on rifle size locks. French influenced, this sideplate is very similar to the French Type D fusil sideplate. Wax cast steel. Made in the USA. Overall length 5-1/2", height 1-1/16", thickne
|
|
Sideplate for a French Fusil , iron (wax cast steel)
Engraving is cast in. Bolt holes are about perfect for our French Type “C”, Type “D”, Tulle, L & R Trade Lock, Twigg, Early Ketland and similar flintlocks. Shorten the front for smaller locks. Matching triggerguard and buttplate are available. Wax cast steel. Made in the USA. Overall length 5-7/16", height 1", thickness 0.070". This simple early si
|
|
sideplate , for Hawken Rifle or Plains Rifles , steel
Sideplate for a Hawken or Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Remove the teat for use on English rifles. Cut from steel, made in the U.S.A. Overall length 3/4", height 1/2", thickness 0.125". Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 or 10-32 lock bolt with up
|
|
Sideplate , for H.E. Leman Indian Trade Rifle , wax cast steel
Sideplate for a H.E. Leman Indian Trade Rifle, or other style of plains rifle. This 1/2" diameter sideplate has a small square lug that is should be oriented perpendicular to the barrel. Wax cast steel .080" thick the casting is shaped with draft to aid in inletting. It will require deburring. Use a #BOLT-L-8-R lock bolt, or any 8-32 or 10-32 lock
|
|
Sideplate for early Hawken or Plains Rifle , steel
Sideplate for an early Hawken rifle, Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Remove the teat for use on English sporting rifles. Cut from solid steel, made in the U.S.A. Overall length 3/4", height 1/2", thickness 0.120". Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 o
|
|
Sideplate for an American Longrifle or Kentucky Pistol , wax cast steel
An Lebanon or Lancaster County longrifle style sideplate for a small rifle or Kentucky pistol. This sideplate is sized to be used with a small Siler flintlock, but will also fit the L&R John Bailes lock. Wax cast steel, the lock bolt holes are precast, drill for clearance to accept a 8-32 or 10-32 lock bolt. Overall length 4-1/8", height 7/8", thic
|
|
Sideplate for Herman Rupp Lehigh Valley Longrifle, wax cast steel
This Lehigh Valley sideplate has a arrow head pointed tail with molding and cast in grooves. Patterned from a sideplate on a Herman Rupp longrifle, it would be ideal for other makers of the Allentown-Bethlehem region. Lock bolt are as cast for 8-32 lock bolts with 3/8" diameter heads, enlarge the clearance hole with a 13/64" drill bit to accept 10-
|
|
Sideplate for a French TULLE Fusil-de-Chasse , iron (steel)
French sideplate, flat, for a Tulle fusil-de-chasse, French Marine fusil, or French musket. Use our 1/2" diameter dome head 8-32 or 10-32 lock bolts. The lock bolt holes are on 3 inch centers, for use with our Tulle fusil lock, fowling gun lock, and similar medium large flint locks. Inlet this sideplate flush with the side panel. This nice sideplat
|
|
Swivel wide for forend, includes 6-40 mounting screw, wax cast steel
This steel swivel casting has a round cross section. A forward sling swivel should always be placed to rest against a ramrod pipe. This placement will prevent the swivel from interfering with the installation of the ramrod. Secure it to a underlug dovetailed to the bottom of the barrel. We recommend our #UL-DH-1. The swivel is just over 15/16" wide
|
|
Swivel narrow for triggerguard, includes 6-40 mounting screw, wax cast steel
This steel castings has round cross section. Use the narrow swivel at the front of your triggerguard, on a boss-head screw behind the guard, or through the rib. Swivel is 5/16" wide inside dimension at the mounts. Includes a 6-40 mounting screw. Swivel will accept a sling up to 1-1/4" wide. This casting will need to have the casting gate removed.
|
|
Tap , high speed steel, 6-48 thread, bottom tap
Tap, high speed steel, 6-48 thread, bottom tap. Tap Drill: for 6-48 thread, use No. Drill-31 Clearance Drill: for 6-48 thread, use No. Drill-25 Be sure to order the correct diameter tap drill and clearance drill bits.
|
|
Tap , high speed steel, 6-48 thread, plug tap
Tap, high speed steel, 6-48 thread, plug tap Tap Drill: for 6-48 thread, use No. Drill-31 Clearance Drill: for 6-48 thread, use No. Drill-25 Be sure to order the correct diameter tap drill and clearance drill bits.
|
|
Tap , high speed steel, 6-48 thread, taper tap
Tap, high speed steel, 6-48 thread, taper tap. Tap Drill: for 6-48 thread, use No. Drill-31 Clearance Drill: for 6-48 thread, use No. Drill-25 Be sure to order the correct diameter tap drill and clearance drill bits.
|
|
|
Tap , high speed steel, 9-1.25mm thread, plug tap.
Tap, high speed steel, 9-1.25mm thread, plug tap. Tap Drill for 9-1.25mm thread, use a 7.75mm tap drill This tap is primarily used to recut damaged nipple seat threads on imported muskets that were originally 8-1.25mm thread.
|
|
|
Tap , high speed steel, 9-1mm thread, plug tap.
Tap, high speed steel, 9-1mm thread, plug tap. Tap Drill for 9-1mm thread, use a 8mm tap drill This tap is primarily used to recut damaged nipple seat threads on imported muskets that were originally 8-1mm thread.
|
|
|
Taps , high speed steel, 7-1mm thread
Only available in High Speed Steel. The common use for this tap is to retap a damaged 6-.1mm nipple seat used on many Spanish made replica rifles. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to l
|