Build Track's Bedford flintlock longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $1,049.80 Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l

Sharpening Woodworking Tools, How to Achieve the Sharpest Cutting Edges with Traditional Techniques , by Rudolf Dick There is much discussion among artisans when it comes to improving the cutting behavior of tools quickly and permanently, but the debate is settled here, where expert engineers and master craftsmen prove teh benefits of sharpening blades and tools using methods based on time-tested Japanses water stone grinding techniques. Leatn through detailed in       BOOK-SWT . . . $30.99

Build Track's Bucks County flint lock longrifle parts set with 13/16", or 7/8" octagon barrel Price: starting at $1,050.21 Bucks County rifles are considered a distinct style with-in the Lehigh Valley school. Typical features include the drooping buttstock shape, side opening patchbox, long pointed tail on the sideplate, and shaped thumbnails finials on the buttplate and triggerguard. The side opening patchbox while a common feature on Bucks County longrifles, is not u

Build Track's J. P. Beck Lebanon Township parts set with "B" or "C" profile, 44" swamped barrel, cut for sliding wood patchbox Price: starting at $1,256.59 Build Track's John Philip Beck Lebanon Township, Lancaster, Pennsylvania, 44" swamped barrel, traditional brass or iron trim, plain, or fancy maple stock with sliding wood patchbox We offer these fine Lebanon Township, Lancaster County style parts, modeled after the work of John Philip Beck. Lebanon township is located just to the north of Lancas

Build Track's Bedford percussion longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $984.09 Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l

Build Track's Classic Tennessee longrifle kit , in traditional iron, or brass, with 13/16" octagon barrel in .36, .40, or .45 caliber Price: starting at $981.95 Build Track's Classic Tennessee longrifle, easy to assemble rifle kit, 36 or 42" octagon barrel, traditional iron, plain or fancy maple stock Often referred to as a Tennessee style, this attractive South Mountain percussion longrifle is trimmed in iron, and stocked in plain maple. Original Tennessee flint rifles were often equipped with imported

Build Track's Early Tennessee longrifle kit , flintlock, traditional iron trim, with 15/16" octagon barrel in popular calibers Price: starting at $1,010.66 Build Track's Early Tennessee longrifle, easy to assemble rifle kit, 36 or 42" octagon barrel, traditional iron trim, plain or fancy maple stock This attractive South Mountain flint longrifle is trimmed in iron, and stocked in curly maple. Often referred to as a Tennessee style, this Southern rifle is fitted with a correct English Durs Egg flint

Build Track's Early Tennessee longrifle kit , L&R Durs Egg percussion lock, traditional iron trim, with 15/16" octagon barrel Price: starting at $944.95 Build Track's Early Tennessee longrifle, easy to assemble rifle kit, 36 or 42" octagon barrel, traditional iron trim, plain or fancy maple stock Build a attractive South Mountain flint longrifle trimmed in iron, and stocked in curly maple. Often referred to as a Tennessee style, this Southern rifle is fitted with a percussion conversion English D

Build Track's Hawken fullstock plains rifle , 1" straight octagon barrel Price: starting at $1,143.58 Build Track's fullstock Hawken Rifle kit, 1" octagon 36" barrel, traditional iron, or fancy brass trim, maple or walnut stock Track's best fullstock Hawken Rifle parts were selected by the by noted gunmaker Fred Strom , who built the nice rifle shown above. Stocked in figured tiger stripe maple, this nice rifle is strikingly handsome. Trimmed wi

John Bivins Ramrod Pipes , octagon, for 3/8'' rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are octagon, with turned wedding bands at each end, for 3/8" ramrod, in your choice of brass or iron (steel), for fullstock longrifles. They may be easily modified for a halfstock. Designed by John Bivins, for use on his 1770 Lancaster County style Commonwealth of Pennsylvania - BiCentennial Comm

English Style Ramrod Pipes, for 3/8" rod, brass or iron Shown in side view, and top view, these ramrod pipes are round, with decorative rings, for 3/8" ramrod, in your choice of wax cast brass or iron (steel). Made for use on half stock or fullstock English sporting rifles. English sporting rifles were most often trimmed in iron, while English trade guns and fusils were often trimmed in brass. Our entr

English Style Ramrod Pipes, for 7/16" rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are round, with decorative rings, for 7/16" ramrod, in your choice of wax cast brass or iron (steel). Made for use on half stock or fullstock English sporting rifles. English sporting rifles were most often trimmed in iron, while English trade guns and fusils were often trimmed in brass. Our ent

Hawken Ramrod Pipes , round, for 7/16" rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are round, for 7/16" ramrod, in your choice of brass or iron (steel), for fullstock or halfstock. Iron pipes, and iron furniture, are the correct traditional choice for Hawken rifles. Other Plains rifles were often trimmed in brass. Our entry pipe (where rod enters the wood) has an integral ski

Traditional Hawken Ramrod Pipes , round, for 7/16" rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are round, with decorative rings at ends, for 7/16" ramrod, in your choice of brass or iron (steel), for fullstock or halfstock. Iron pipes, and iron furniture, are the correct traditional choice for Hawken rifles. Other Plains rifles were often trimmed in brass. Our entry pipe (where rod enter

Isaac Haines Ramrod Pipes, octagon with ringed ends, for 5/16" or 3/8'' rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are octagon with rings at each end. These ramrod pipes will accept your choice of 5/16" or 3/8" ramrod as cast. Order your choice of brass or iron (steel), for a fullstock longrifle. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-1/4" length, about 2-3/4"

Isaac Haines Pistol Ramrod Pipes , octagon with ringed ends, for 5/16" or 3/8'' rod, wax cast brass or iron Shown in side view, and top view, these short ramrod pipes are octagon with rings at each end. Available to accept a 5/16", or 3/8" diameter ramrod as cast, in your choice of brass or iron (steel), for a fullstock pistol. They may be easily modified for a halfstock pistol. Designed for use on our Kentucky pistol stocks, and Dueling pistol stocks. O

Jim Bridger Hawken halfstock , pre shaped stock, pre-inlet, 1-1/8" straight or tapered octagon barrel, Jim Bridger lock Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8” straight or 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our

stock, Jim Bridger Hawken , pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, plain maple Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our wax cast Jim Bridg       STK-JB-17-M1 . . . $235.00

stock, Jim Bridger Hawken , pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, fancy maple Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our wax cast Jim Bridg       STK-JB-17-M3 . . . $290.00

stock, Jim Bridger Hawken , pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, extra fancy maple Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our wax cast Jim Bridg       STK-JB-17-M4 . . . $350.00

Hawken Rifle , .54 caliber 35" Sharon barrel, L&R percussion, iron trim, maple, new, unfired, by George Nelson Stocked in maple, this classic percussion halfstock Hawken rifle is trimmed with traditional Hawken iron furniture. The 35" barrel and iron trim are finished to a dark brown. A classic Hawken hooked breech and two wedge keys retain the straight octagon barrel. allowing instant take-down, for easy cleaning. This rifle was assembled by contemporary b       AAW-345 . . .

Duvall's Antique Firearms Restoration System Kit Duvall's Antique Firearms Restoration System: Customers often ask how best to restore an Antique gun without damaging the historical value. Developed by Dennis Duvall, a former museum curator. Mr. Duvall has assembled a kit using the products that they use to conserve their huge collection. A complete restoration kit suited for cleaning, restoring       DUVALL-AFRS . . . $29.99

Build Track's Hawken fullstock plains rifle , flintlock, with 1" straight octagon barrel up to 42" in length Price: starting at $1,202.49 Build Track's Early Hawken fullstock rifle kit, 1" octagon barrel, up to 42" barrel, traditional iron trim, with maple stock Track's best early fullstock Hawken Rifle parts were selected by the by noted gunmaker J.E. Brown , who built the nice rifle shown above. Stocked in figured tiger stripe maple, this nice rifle is strikingly handsome. Trimm

Build Track's English Fowling Gun, in traditional brass or iron trim, rifled or smoothbore 42" octagon-to-round barrel Price: starting at $1,084.16 build Track's English Fowling Gun, easy to assemble, 42" octagon-to-round barrel, traditional brass, or iron trim, walnut or maple stock Build a correct replica traditional English fowler or rifle. Choose optional upgrades, including walnut, plain or fancy curly maple; iron or brass furniture with round face L&R Queen Anne flint lock. Track's Eng

Plains Pistol , .50 caliber, 8" barrel, percussion, walnut, brass, new, unfired, by Investarm Stocked in walnut, with 15/16" octagon barrel with hooked breech, color hardened percussion lock, and brass triggerguard. This Plains Pistol has the classic 1830 era bag butt architecture. This is a very comfortable grip, large enough for man sized hands, with enough drop and curve to make aiming as instinctive as pointing your finger. The pistol i       INV-GPP-50 . . . $379.00

has been added to your .

---