Kodiak Express Double Rifle,
.54 caliber, 28" barrels,
percussion, walnut, checkered pistol grip,
used, by Davide Pedersoli
Part Number: AAW-441
Availability: In Stock
Price: $1,349.00
Order Quantity:
Pedersoli Kodiak Express rifle, stocked in walnut. Barrels are 28" long, rifled in .54 caliber. Locks are engraved with color case hardened finish. The breeches are fitted with hardened steel nipples for No. 11 caps. The 13-1/2" and 14-1/4" length of pull should fit todays average shooter. The rifle weighs 10.8 pounds and is fitted with sling swivels. The rifle is used with some handling marks on the stock and wear on the blue finish.

This is a older production example and the .54 caliber barrels are rifled with slow twist, approximately 1 in 60" twist, unlike the current production with the 1 in 24" twist rate. The elevated front sight ramp is mounted to the rib, fitted with a gold bead front sight. Two folding leaf rear sights are mounted at the breech. Each rear sight is individually adjustable for elevation and windage. The example has minimal markings on the barrel with the caliber on the top and serial number on the side of the left barrel.

The walnut stock is very straight grain and has some marks near the heel. The pistol grip stock is checkered at the wrist and the forend. Fitted with a color cased hardened steel buttplate the wood has lifted very slightly on the left side edge from compressing against the buttplate. The long tang is engraved, polished and blued. The rear two screws are properly spaced to accept our Creedmoor Vernier 3" tang sight. However, most hunters prefer the open sights as issued, when hunting big game. A single key retains the barrel. The wedge key allows you to quickly dismount the barrels, without using tools. The hooked breech allows easy cleaning, without risk of wetting the stock. he rear sling swivel stud is securely mounted in the buttstock, while the forward swivel stud is mounted to the middle ramrod pipe. The factory wood ramrod has a brass tip with 10-32 threads. No cheekpiece is formed, making this double rifle equally handy for a right or left hand shooter.

The Pedersoli Express Rifle bar locks are engraved with a scroll designs and color case hardened in vivid mottled colors. The locks appear to be in good condition, and the breech is fitted with new hardened steel nipples for No. 11 percussion caps. . The checkered grip will provide a secure grip when you fire this large bore rifle.

A used Pedersoli Kodiak double rifle in .54 caliber with pistol grip stock and sling swivel mounts. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
.530" round balls, pure lead, Hornady, per 100
.530" round balls, pure lead, Hornady, per 100
Part Number: BALL-530
Availability: In Stock
Price: $24.99
Order Quantity:
.530" round balls, pure lead, hand cast, per 50
.530" round balls, pure lead, hand cast, per 50
Part Number: BALL-530-X
Availability: In Stock
Price: $15.49
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.59
Order Quantity:
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Part Number: BP-54-10
Availability: In Stock
Price: $3.99
Order Quantity:
Bore brush, bronze, for .54 caliber, 10-32 thread
Bore brush, bronze, for .54 caliber, 10-32 thread
Part Number: BRUSH-54-10
Availability: In Stock
Price: $4.29
Order Quantity:
Powder Flask,
brass body, brass dispensing valve,
embossed Diamond or Basket Weave pattern
accepts 10-1mm threaded spouts
Powder Flask, brass body, brass dispensing valve, embossed Diamond or Basket Weave pattern accepts 10-1mm threaded spouts
Part Number: FLASK-DIAMOND
Availability: In Stock
Price: $59.99
Order Quantity:
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $4.99
Order Quantity:
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Part Number: FS-54-10
Availability: In Stock
Price: $4.29
Order Quantity:
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread
Part Number: JS-54-7-10
Availability: In Stock
Price: $5.09
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $22.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: Out of Stock, request notification when available.
Price: $8.59
  
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $4.99
Order Quantity:
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Part Number: OX-18-50-D
Availability: In Stock
Price: $5.29
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $5.79
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
  Ramrods cannot be send to a P O Box.
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread Ramrods cannot be send to a P O Box.
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $18.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, 
#11 CCI cap, square shank,
hardened steel, ideal for restoration

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: RST-I
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: Out of Stock, request notification when available.
Price: $6.89
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2025Track of the Wolf, Inc.
Accepted Credit Cards