Mold, Lyman .58 caliber Parker Hale Minie bullet mold blocks , 566 grain, single cavity, use large handles Lyman .58 caliber for Parker Hale, 566 grain Minie bullet mold, single cavity, steel blocks only. Hollow base Minie bullets load easily, and expand to engage rifling. These precision mold blocks are made in the U.S.A. and tend to cost a bit more than other brands. They are nice quality. Special steel alloy mold blocks hold heat, for even casting te       LYMAN-575-213-PH . . . $99.99

Nipple Wrench for Rifles & Shotguns , slotted end for #11 nipple Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! This well tempered nipple wrench has two sturdy finger       NW-120 . . . $9.99

Nipple Wrench for Revolvers , for 1858 Remington .44 Revolver, .31 & .36 Pocket & Police Model Colt Revolvers, and other revolvers with a tight nipple recess Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! #NW-130 wrench has a .187" slot in a .29" shaft to fit       NW-130 . . . $9.99

Bedford County Patchbox Kit , brass, about 7-7/8" length Copied from a rifle made and signed by Jacob Stoudenour, 1795-1863. Shown in Gunsmiths of Bedford, Fulton, Huntingdon & Somerset Counties , this is a classic Bedford County longrifle style. A cam-open spring, spring mounting screw, and simple instructons are included. The steel pawl is mounted under the lid to serve as the cam. The spring is tempe       PB-KIT-3-B . . . $31.99

Bedford County Patchbox Kit , nickel silver, about 7-7/8" length Copied from a rifle made and signed by Jacob Stoudenour, 1795-1863. Shown in Gunsmiths of Bedford, Fulton, Huntingdon & Somerset Counties , this is a classic Bedford County longrifle style. A cam-open spring, spring mounting screw, and simple instructons are included. The steel pawl is mounted under the lid to serve as the cam. The spring is tempe       PB-KIT-3-S . . . $38.99

1746 Brown Bess Ramrod Pipes , 3/8" for tapered rod, brass Shown in top view, and side view, these ramrod pipes are copied directly from an original First Model Brown Bess, marked 1746, about 3/8" inside diameter, for a tapered 7/16" ramrod, wax cast brass. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-3/4" length, about 4-7/8" overall, including the skirt. Wax cast

John & Caleb Vincent Ramrod Pipes, , octagon for fullstock rifles, for 5/16", or 3/8" rod, brass or nickel silver Shown in side view, and top view, these John & Caleb Vincent ramrod pipes are octagon with rings at each end, in your choice of 5/16", or 3/8" ramrod, in your choice of brass or nickel silver, for fullstock rifles. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, these are ideal for use on John & Caleb Vincent Ohio fu

H.E. Leman Trade Rifle Ramrod Pipes , round, for 3/8" or 7/16" ramrod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are round, for either a 3/8", or 7/16" diameter ramrod, in your choice of brass or iron (steel), for fullstock or halfstock. Our entry pipe (where rod enters the wood) has an integral skirt. Overall length is 2-17/64", body is 1-3/64"long with walls 1/32" thick. The lug for pin stands .2" tall.

Ramrod pipe, brass , forward pipe, plain for rib, round, accepts 3/8" ramrod for H.E. Leman Trade Rifle Ramrod pipe , iron, forward pipe, plain for rib, round, for 3/8" ramrod. The body is 1-1/4" length overall. Turned steel. Made for a halfstock rifle (with steel underrib extending to muzzle), most rifles use two forward pipes, and a few extra long rifles use three forward pipes. When mounting to a halfstock rifle, file a flat on the pipe, and a ma       RP-LEMAN-H-6-B . . . $6.99

Ramrod pipe, iron , forward pipe, plain for rib, round, accepts 3/8" ramrod for H.E. Leman Trade Rifle Ramrod pipe , iron, forward pipe, plain for rib, round, for 3/8" ramrod. The body is just over 1-1/32" length overall. Turned steel. Made for a halfstock rifle (with steel underrib extending to muzzle), most rifles use two forward pipes, and a few extra long rifles use three forward pipes. When mounting to a halfstock rifle, file a flat on the pip       RP-LEMAN-H-6-I . . . $6.59

Fancy Octagon Ramrod Pipes, with thumbnail skirt, for 5/16", 3/8", or 7/16" rod, brass or nickel silver Shown in side view, and top view, these fancy octagon ramrod pipes are octagon with rounds at each end, for your choice of 5/16", 3/8", 7/16" ramrod, in your choice of brass or nickel silver, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on Golden Age era longrifles , th

Deluxe Round Ramrod Pipes, with ringed ends, for 5/16", 3/8", or 7/16" rod, brass or nickel silver Shown in side view, and top view, these deluxe ramrod pipes are round with raised rings at each end, for your choice of 5/16", 3/8", 7/16" ramrod, in your choice of brass or nickel silver, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on Golden Age era longrifles , these

Deluxe Round Ramrod Pipes , thumbnail skirt with ringed ends, for 5/16", 3/8", or 7/16" rod, brass, iron, or nickel silver Shown in side view, and top view, these deluxe ramrod pipes are round with raised rings at each end, the entry pipe features a decorative raised thumbnail for your choice of 5/16", 3/8", 7/16" ramrod, in your choice of brass, iron, or nickel silver, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Design

Fusil or Fowler Ramrod Pipes , deluxe round with ringed ends, polished brass or iron Shown in side view, and top view, these French octagon ramrod pipes are round with raised rings at each end, for your choice of 5/16" or 3/8" ramrod, available in your brass or iron, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on fusils or fowlers, these are ideal for

Fusil or Fowler Ramrod Pipes , octagon, polished brass Shown in side view, and top view, these French octagon ramrod pipes are octagon with rounds at each end, for your choice of 3/8" ramrod, available in your brass only, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on fowler or fusil, these are ideal for use on many of our

Golden Age Ramrod Pipes, octagon with ringed ends, for 5/16", 3/8", or 7/16" rod, brass or nickel silver Shown in side view, and top view, these Golden Age ramrod pipes are octagon with rings at each end, for your choice of 5/16", 3/8", 7/16" ramrod, in your choice of brass or nickel silver, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on Golden Age era longrifles , these

Fancy Octagon Ramrod Pipes, with round ends, for 5/16", 3/8", or 7/16" rod, brass or nickel silver Shown in side view, and top view, these fancy octagon ramrod pipes are octagon with rounds at each end, for your choice of 5/16", 3/8", 7/16" ramrod, in your choice of brass or nickel silver, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash, for use on Golden Age era longrifles , th

Octagon Pistol Ramrod Pipes, for 5/16" or 3/8" rod, brass or nickel silver Shown in side view, and top view, these short ramrod pipes are octagon, round at each end, for 5/16 or 3/8" ramrod, in your choice of brass or nickel silver, for fullstock pistols. They may be easily modified for a halfstock pistol. Designed by Tedd Cash, these are ideal for use on our Kentucky pistol stocks, and Dueling pistol stocks. Our entry p

Round Ringed Ramrod Pipes, for 3/8'' rod, brass or nickel silver Shown in side view, and top view, these short ramrod pipes are round with rings at each end, for 3/8" ramrod, in your choice of brass or nickel silver, for fullstock pistols. They may be easily modified for a halfstock pistol. Designed by Tedd Cash, for use on the George Washington Holster Pistol , these are ideal for use on our Kentucky pistol sto

Plain Round Ramrod Pipes, for 5/16", 3/8", or 7/16" rod, brass, iron, or nickel silver Shown in side view, and top view, these ramrod pipes are round with no decorations, for your choice of 5/16", 3/8", 7/16" ramrod, in your choice of brass, iron, or nickel silver, for fullstock rifles or fowling guns. They may be easily modified for use on a halfstock gun. Designed by Tedd Cash these are ideal for use on many of our plains rifle sto

Tru-Spark , Carbonitriding Surface Hardening Compound, with Track's detailed instructions for best frizzen sparking, safe, easy to use in a home workshop, non-toxic, 4 oz., made in the USA Tru-Spark Case Hardening Compound This unique product requires only two or three minutes at high temperature to achieve a good wearing surface with fine grain structure, ideal for hardening frizzens to spark well. You will need a Oxygen Acetylene torch for hardening a frizzen. Small steel parts may be hardened using a Propane torch. Medium size       TRU-SPARK-4 . . . $21.99

Antique Halfstock Rifle .38 caliber fast twist, 34-1/2" barrel, walnut, saw handle, nickel silver, J.H. Woods Helena, KY marked percussion lock This halfstock rifle has the appearance of a 1860 or later era longrifle. Stocked in walnut an trimmed in period nickel silver furniture. The furniture includes a crescent buttplate and triggerguard with finger spurs. The stock is fitted with a poured pewter forend cap, single wedge key with escutcheon plates. The breech/wrist has a saw handle desi       AAW-027 . . . $1,499.99

Kentucky Pistol , .54 caliber, 12" Green Mountain barrel, curly maple, brass trim, Siler percussion lock, used This Kentucky pistol is stocked in curly maple, trimmed in brass furniture, with a .54 caliber Green Mountain barrel, and small Siler percussion lock. The curly maple is stained to tawny brown with a golden undertone. The brass is polished bright, the lock and barrel have a browned finish. The small Siler percussion lock has the appearance of a lat       AAW-133 . . . $799.00

Kentucky Pistol , .50 caliber, 10" octagon-to-round barrel, small Siler flintlock, walnut, Georgian style brass furniture, by Ken Brady This Kentucky pistol is stocked in black walnut, with a warm brown tone. This pistol is trimmed in brass Georgian style furniture that appears to be from the late William Kennedy. A few Colonial American makers produced pistols with Georgian style furniture, such as J.P. Beck from Lancaster, Pennsylvania. The brass furniture has a hand burnished to       AAW-142 . . . $2,749.00

Kentucky Pistol .50 caliber 10-1/2" tapered barrel, small Siler flint lock, curly maple, engraved brass trim, signed by R.W. Deitz This Kentucky pistol is stocked in curly maple, stained to a golden brown. The brass furniture has a hand burnished appearance with engraved accents and nicely compliments the tone of the stock. The tapered octagon barrel is finished to a dark brown, while the small Siler flintlock has a temper blue finish. This pistol is unfired and has only a few       AAW-147 . . . $2,699.00

has been added to your .

---