Rear sight, low long base longrifle style for 15/16" or 1" barrels, wax cast steel Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .575" wide for use on a 15/16" or 1" barrel. Dovetail to a depth of .050". Height from t       RS-LLB-16 . . . $8.99

Rear sight, Mariano Modena Hawken style for 15/16" or 1" barrels, wax cast steel Patterned after an original rear sight found on a very early Hawken halfstock rifle, owned by the famous mountain man of Taos, Mariano Modena. Angular flats decorate the base of this semi-buckhorn sight. The base is .500" long by .580" wide. Dovetail .050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.29".       RS-MH-16 . . . $8.99

Lyman No. 12S Sight Slot Blank , 3/8" by 3/32" dovetail, blued steel A Lyman No. 12S sight slot blank to fill empty dovetail slots and protect the edges from damage. Dovetail blank is .380" long, .650" wide, and .093" deep.       RS-SLOT-BLANK-3/8 . . . $12.99

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"       RST-I . . . $4.99

Nipple, 1/4-28 thread for rifle, with cone for military musket cap, stainless steel, requires NW-100 musket nipple wrench Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"       RST-MS . . . $7.99

Nipple, 1/4-28 thread, for 1847 Walker & Dragoon revolvers by most mfg. including Armi San Marco, Tucker, Sherrod & Company Dragoon by A. Uberti, for #11 CCI cap, hardened steel Cone length: 0.400" Thread journal length: 0.225" Overall length: 0.625" Diameter of base: 0.307"       RST-WI . . . $5.99

Nipple, 1/4-28 thread, .430" long cone for some Colt brand Colt 1847 Walker & Dragoon revolvers, for #11 CCI cap, stainless steel Cone length: 0.430" Thread journal length: 0.225" Overall length: 0.655" Diameter of base: 0.310"       RST-WLS . . . $5.99

Nipple, 1/4-28 thread, for 1847 Walker & Dragoon revolver by most mfg. including Armi San Marco, Tucker, Sherrod & Company Dragoon by A. Uberti, for #11 CCI cap, stainless steel Cone length: 0.400" Thread journal length: 0.225" Overall length: 0.625" Diameter of base: 0.307"       RST-WS . . . $5.99

Adapter for rod tip , stainless steel, knurled center, 10-32 male to 5/16-27 female       SA-10 . . . $3.49

Adapter for rod tip , stainless steel, knurled center, 8-32 male to 5/16-27 female       SA-8 . . . $3.49

Nipple, .220-32 thread, for #11 CCI cap, square shank, stainless steel for Amazonas shotgun Cone length: 0.493" Thread journal length: 0.160" Overall length: 0.653" Diameter of base: 0.302" Nipple, .220-32 thread, tapered cone for CCI brand No. 11 cap, square shank, 416 stainless for Amazonas shotgun, made in the USA       S-AMAZONAS-S . . . $7.99

Clean Out Screw , 10-32 thread, to repair Thompson Center rifles with exposed screw, you must tap the breech plug for this thread, steel This nice quality No. 10-32 slotted headless screw is made to REPAIR Thompson Center rifles where the exposed 8-32 threaded screw and threaded seat has been badly damage from attempting to remove it. The original thread was 8-32, it must be drilled and tapped 10-32 to accept this screw. . Not all production T/C guns have this style exposed screw, a       SCREW-10-32-TC-COX . . . $2.99

Wood screw, truss head #10 x 1/2" domed, steel Un-plated #10 x 1/2" truss head screw matches our #Bolt-L-10-D. Anchors the tail of N.W. Gun serpents and three screw sideplates.       SCREW-10-D . . . $0.30

Wood screw, flat head #10 x 1-1/2", steel Un-plated #10 x 1-1/2" flat head wood screw, for large buttplates.       SCREW-10X1-12 . . . $0.30

Machine Screw , #5-40 thread, steel Un-plated #5-40 machine screw. Use three to five on an underrib. Overall length is 0.335"       SCREW-5-40 . . . $0.30

Machine screw, for Thompson Center ramrod retaining spring, 6-48 thread, unplated, steel This nice quality unplated No. 6-48 screw is made for mounting a Thompson Center ramrod retaining spring and rear of the underrib to the barrel. The screw has a overall length of .34" with a .180" diameter head, .04" thick. We offer plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this screw, at low cost.       SCREW-6-48-TC-RRS-X . . . $2.99

Wood screw, flat head #6 x 1/2", steel Un-plated #6 x 1/2" flat head wood screw, for patchbox or toeplate.       SCREW-6X12 . . . $0.20

Wood screw, oval head #6 x 1/2", steel Un-plated #6 x 1/2" oval head wood screw, for patchbox or toeplate.       SCREW-6X12-O . . . $0.20

Wood screw, flat head #6 x 5/8", steel Un-plated #6 x 5/8" flat head wood screw, for trigger-plate or toe-plate.       SCREW-6X58 . . . $0.20

Clean Out Screw , 8-32 thread, for Thompson Center rifles with exposed screw, steel This nice quality No. 8-32 slotted headless screw is made for Thompson Center rifles with an exposed clean out screw. Not all production have this screw, as T/C moved it to the back side on later guns. Overall length is 0.22".       SCREW-8-32-TC-COX . . . $2.99

Wood screw, flat head #8 x 5/8", steel Un-plated #8 x 5/8" flat head wood screw, for guards or patchboxes.       SCREW-8X58 . . . $0.20

Nipple, 9/32-26 BSF thread, for #11 CCI cap, stainless steel for Jodhpur shotgun Cone length: 0.435" Thread journal length: 0.200" Overall length: 0.635" Diameter of base: 0.307"       SD-S . . . $7.99

Sheet Brass, Nickel Silver, or Steel .016" to 1/8" thick

Sideplate , for Hawken or Plains Rifle , counterbored for 3/8" lock bolt head, steel Sideplate for a Hawken or Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Remove the teat for use on English rifles. Overall length 3/4", height 1/2", thickness 0.125". Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 or 10-32 lock bolt with up to 3/8" diameter head. We provide t       SP-EHLB-I . . . $5.99

Sideplate for your Golden Age Longrifle , wax cast steel This classic Golden Age sideplate is sized to fit a large Siler, or L&R Classic lock. Lock bolts holes are pre cast, drill for clearance to accept a 8-32 or 10-32 lock bolts. Lock bolts can have up to a 1/2" diameter head. Overall length 4-13/16", height 1", thickness 0.085".       SP-FG-44-I . . . $17.59

has been added to your .

---