Lee Bullet Mold , .38 caliber, 6 cavity, .358" diameter, 158 grain, flat nose solid base. six (6) cavity mold blocks, with cam-action sprue plate, requires Lee handles Lee Six (6) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprue. This bullet mold produces 6 caliber .38 bullets, .358" diamter, 158 grain, round nose flat point bullets, for your .38 Colt, .38 Special, .357 Magnum, and       LEE-90692 . . . $56.99

Lee Bullet Mold .44-40, .44 Special & Magnum caliber, .430" diameter, 310 grain, round nose flat point mold, double cavity Lee Black Powder Cartridge molds are aluminum blocks, in permanently attached steel handles with sturdy grips. Aluminum blocks won't rust, lead won't adhere, and they heat quickly. But they are softer than blued steel and require gentle handling. If you treat these high precision molds with care and respect, they will last a lifetime. The cavity c       LEE-90858 . . . $36.99

LEE Adjustable Shot Dipper , adjusts from 7/8 to 1-7/8 oz. Accurately measure lead, bismuth and steel. Telescoping cup adjustable from 7/8 to 1 7/8 oz. Calibrated for lead shot. Works perfect for large pellet sizes. With steel, simply count out pellets or weigh and set dipper accordingly.       LEE-SHOT-DIPPER . . . $4.29

Lyman Brass Smith Powder Measure Whether dropping charges for small pistol cases or large rifle cases, this measure gives consistent and accurate performance. The CNC machined steel metering cylinder features a micrometer adjustable thimble with reference lines so resetting the measure is easy. The reservoir is equipped with a powder baffle which maintains a consistent powder leve       LYMAN-BS-PM . . . $74.50

Lyman Carbide Pistol Three Die Set , for .38 Special/.357 A one piece hardened steel decapping rod and extra seating screws for all popular bullet nose shapes, and all steel construction.       LYMAN-DIE-38-SP . . . $84.99

Lyman Carbide Pistol Three Die Set , for .45 Long Colt A one piece hardened steel decapping rod and extra seating screws for all popular bullet nose shapes, and all steel construction.       LYMAN-DIE-45-LC . . . $84.99

Nipple Wrench for Muskets , with slotted socket, for square or flat side nipples Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! This well tempered slotted end wrench works well for he       NW-100 . . . $9.99

Nipple Wrench for Rifles , short style, with slotted end Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our most popular wrench, light enough to fit in your po       NW-160 . . . $9.99

Nipple Wrench for Rifles & Pistols , small slotted socket end, for small nipples Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our smallest socket wrench has a .3/8" body tapering do       NW-170 . . . $9.99

Vincent Rifle Capbox Kit , brass, about 6" overall length This capbox is a copy of one on an Ohio rifle by John Vincent & Son. It was stocked in curly maple, trimmed in brass. Vincent rifles frequently mixed brass and German silver trim on their rifles. This nicely made patchbox has an overall length of about 6". Vincent used nine steel screws on the original capbox. Includes nine steel screws.       PB-KIT-13-B . . . $26.99

Vincent Rifle Capbox Kit , nickel silver, about 6" overall length This patchbox is a copy of one on an Ohio rifle by John Vincent & Son. It was stocked in curly maple, trimmed in brass. Vincent rifles frequently mixed brass and German silver trim on their rifles. This nicely made patchbox has an overall length of about 6". Vincent used nine steel screws on the original capbox. Includes nine steel screws.       PB-KIT-13-S . . . $36.99

Ramrod pipe, iron , entry pipe with skirt, octagon with rings, for 5/16" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-1/4" length, about 2-3/4" overall, including the skirt. Wax cast steel. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock rifle.       RP-IH-E-5-I . . . $14.99

Ramrod pipe, iron , entry pipe with skirt, octagon with rings, for 3/8" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-1/4" length, about 2-3/4" overall, including the skirt. Wax cast steel. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock rifle.       RP-IH-E-6-I . . . $14.99

Ramrod pipe, iron , forward pipe with lug, octagon with rings, for 3/8" ramrod Our forward pipe, with lug for pin , is 1-1/4" overall length. Use one, or sometimes two #PIN-3/32 steel dowel pins, to retain a steel ramrod pipe.       RP-IH-F-6-I . . . $14.99

Ramrod pipe, brass , pistol entry pipe with skirt, octagon with ringed ends, for 3/8" ramrod Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 7/8" length, about 1-3/4" overall, including the skirt. Wax cast brass or iron (steel). Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fullstock or halfstock pistol.       RP-IH-PE-6-B . . . $18.99

John & Caleb Vincent , Ramrod Pipes , octagon for halfstock rifles, for 5/16 rod, brass only Shown in side view, and top view, these John & Caleb Vincent ramrod pipes are octagon with rings at each end, only available for 5/16" ramrod, in brass only, for halfstock rifles. Designed by Tedd Cash, these are ideal for use on John & Caleb Vincent Ohio halfstock longrifles . Our entry pipe (where rod enters the wood) has an integral skirt.

Vernier 5" Long Range Tang Sight , for 1874 Sharps, or 1885 Winchester rifle, complete with Sharps mounting screws, by Davide Pedersoli Blued steel, over 5" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 3 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D       RS-DP-1874 . . . $310.00

Vernier 3" Mid-Range Tang Sight , for 1874 Sharps, or 1885 Winchester rifle, complete with Sharps mounting screws, by Davide Pedersoli Blued steel, over 3" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 2 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D       RS-DP-1874-MID . . . $305.00

Rear sight, adjustable Hawken style, with five step elevation riser, by L&R This adjustable sight has a .370" long by .580" wide dovetail spaced 3" ahead of the normal location. A great choice for your halfstock Hawken rifle, it works well on 15/16", 1" or 1-1/8" octagon barrels. Height from the top of the barrel to the top of the sight notch is 0.36" in the lowest setting. Not a fixed iron sight, it does not meet N.M.L.R.       RS-HA-5 . . . $60.00

Sideplate for a French Type 'D' fusil , wax cast brass This French sideplate design is more Germanic or Jaeger shaped, similar to longrifle sideplates. Wax cast brass or steel, this sideplate may be inlet or surface mounted. The round end for the front bolt may be removed for a shorter flint lock. Available in wax cast brass or steel. Made in the USA. Overall length 5-9/16", height 1-1/16", thickness 0       SP-FUSIL-D-B . . . $17.99

Sideplate for Bedford County or Armstrong, Maryland longrifle , iron Suitable for right or left hand use, this sideplate is correct for a longrifle from Bedford, Fulton, Huntingdon, or Somerset County, and the very similar longrifles by Armstrong, Maryland. This precision cut steel sideplate is made to be inlet flush into the side lock panel. The front two holes are spaced to exactly fit the L&R Bedford percussion o       SP-MH-BED-1-I . . . $12.99

Hawken fullstock , pre shaped stock, pre-inlet, 1" octagon, 42" barrel, L&R late English lock Shaped and pre-inlet for, L&R right hand late English lock, L&R Hawken double set triggers, and 1" flint hooked breech, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped fo

Hawken fullstock , pre shaped stock, pre-inlet, 1" octagon, 42" barrel, L&R late English lock, plain maple Shaped and pre-inlet for, L&R right hand late English lock, L&R Hawken double set triggers, and 1" flint hooked breech, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped fo       STK-EHF-16-M1 . . . $299.00

Hawken fullstock , pre shaped stock, pre-inlet, 1" octagon, 42" barrel, L&R late English lock, fancy maple Shaped and pre-inlet for, L&R right hand late English lock, L&R Hawken double set triggers, and 1" flint hooked breech, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped fo       STK-EHF-16-M3 . . . $330.00

Hawken fullstock , pre shaped stock, pre-inlet, 1" octagon, 42" barrel, L&R late English lock, extra fancy maple Shaped and pre-inlet for, L&R right hand late English lock, L&R Hawken double set triggers, and 1" flint hooked breech, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped fo       STK-EHF-16-M4 . . . $420.00

has been added to your .

---