Rear Sight Elevation Screw No. 2 , for earlier Thompson Center Hawken, Renegade, and others, 5-40 threads, adjustment clicks, blued steel Rear sight elevation screw, for early production Thompson Center Hawken, Renegade, and New Englander. 5-40 threads, adjustment clicks, blued steel. Head diameter 0.31". Will not fit the Cherokee, or Seneca rear sights.       RS-TC-EX-2 . . . $5.99

Nipple, 1/4-28 thread for rifle, with cone for military musket cap, hardened steel, requires NW-100 musket nipple wrench Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307" Nipple, 1/4-28 thread, hardened steel, for musket cap, requires NW-100 musket nipple wrench       RST-MI . . . $7.99

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel Cone length 0.440" Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307" Standard nipple, 1/4-28 thread, for #11 cap, stainless steel       RST-S . . . $4.99

Ramrod Tip with Covered Ball Puller Worm , for 5/16" ramrod , brass base and cover, fancy tapered antique style ball puller screw, with sharp tip of tempered steel This brass base is designed for use on a 5/16" ramrod. It is ideal for use on the hidden end of a tapered shotgun ramrod. You will need to turn the end of the rod down to 1/4" then glue and cross drill and pin the tip in place. The base and knurled cap are .300" diameter, slightly under 5/16" to easily enter a 5/16" ramrod pipe and ramrod hole. The       RT-CW-5 . . . $10.99

Ramrod Tip with Covered Ball Puller Worm , for 3/8" ramrod , brass base and cover, fancy tapered antique style ball puller screw, with sharp tip of tempered steel This brass base is designed for use on a 3/8" ramrod. It is ideal for use on the hidden end of a tapered rifle, fowler, or shotgun ramrod. You will need to turn the end of the rod down to 5/16" then glue and cross drill and pin the tip in place. The base and knurled cap are .365" diameter, slightly under 3/8" to easily enter a 3/8" ramrod pipe and       RT-CW-6 . . . $10.99

Ramrod Tip with Covered Ball Puller Worm , for 7/16" ramrod , brass base and cover, fancy tapered antique style ball puller screw with sharp tip of tempered steel This brass base is designed for use on a 7/16" ramrod. It is ideal for use on the hidden end of a tapered large bore rifle or shotgun ramrod. You will need to turn the end of the rod down to 3/8" then glue and cross drill and pin the tip in place. The base and knurled cap are .425" diameter, slightly under 7/16" to easily enter a 7/16" ramrod pipe       RT-CW-7 . . . $10.99

Ramrod rear tip , 5/16" diameter, steel, 10-32 thread, tapered end for Thompson Center Cherokee, Seneca, or Patriot, 1" long Ramrod rear tip , 5/16" diameter, steel, 10-32 thread, tapered end for all calibers of Thompson Center Cherokee or Seneca rifles, and Patriot pistol. The tip has a 1" overall length.       RT-TC-5-10-R-I . . . $3.49

Ramrod forward tip , 5/16" diameter, steel, 8-32 thread, flared concave end for Thompson Center .45 caliber Cherokee or Seneca, 1" long Ramrod forward tip , 5/16" diameter, steel, 8-32 thread, flared concave end for Thompson Center .45 caliber Cherokee or Seneca. The tip has a 1" overall length. The .43" diameter flare could be turned down to allow use in a .36 caliber rifle.       RT-TC-5-8-F-I . . . $3.49

Ramrod rear tip , 3/8" diameter, steel, 10-32 thread, for Thompson Center and CVA style ramrods, 1-3/8" long Ramrod rear tip, 3/8", steel, 10-32 thread, for Thompson Center and CVA style ramrods       RT-TC-6-10-R-I . . . $3.99

Ramrod forward tip , 3/8" diameter flared concave end, steel, 8-32 thread, for Thompson Center and CVA style ramrods, 1-3/4" long Ramrod forward tip, 3/8" diameter flared concave end, steel, 8-32 thread, for Thompson Center and CVA style ramrods       RT-TC-6-8-F-I . . . $3.99

Adapter for rod tip , one piece 5/16" stainless steel, knurled center, 10-32 male to 8-32 female Adapter for rod tip, one piece 5/16" stainless steel, knurled center, 10-32 male to 8-32 female. Ideal for use with our 10-32 Creedmoor ramrod to allow the use of 8-32 accessories.       SA-10M-8F-S . . . $2.99

Adapter for rod tip , one piece 5/16" stainless steel, knurled center, 8-32 male to 10-32 female Adapter for rod tip, one piece 5/16" stainless steel, knurled center, 8-32 male to 10-32 female. Ideal for use with our 8-32 Creedmoor ramrod to allow the use of 10-32 accessories.       SA-8M-10F-S . . . $2.99

Pack of Ten Wood Screws, oval head #1 x 1/4", steel Pack of ten unplated #1 x 1/4" oval head steel wood screw. For small inlays.       SCREW-1X14-O-PACK . . . $2.50

Machine screw, for Invest Arms underrib, 3.5-.6mm thread, unplated, steel This nice quality unplated 3.6-.6mm screw is made for mounting a Invest Arms underrib. The screw has a overall length of .305" with a .181" diameter head, .070" thick. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this screw, at low cost.       SCREW-3.5-.6MM-IA-RIB . . . $2.99

Machine screw, for Invest Arms ramrod pipe, 3.5-.6mm thread, slotted, unplated, steel This nice quality unplated 3.6-.6mm screw is made for mounting a Invest Arms ramrod pipe to a underrib. The screw has a overall length of .375" with a .19" diameter head, .0.4" thick. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this screw, at low cost.       SCREW-3.5-.6MM-IA-ROD-PIPE . . . $2.99

Wood screw, flat head #3 x 1/4", steel Unplated #3 x 1/4" flat head steel wood screw, for #IN-Slot-2-I inlay.       SCREW-3X14 . . . $1.59

Pack of 12 Wood Screws , #3 x 1/4", flat head for countersink, slotted, unplated steel Pack of 12 - Wood Screw, #3 x 1/4", slotted, steel, not plated       SCREW-3X14-PACK-12 . . . $18.99

Wood screw, flat head #4 x 5/8", unplated steel Unplated steel #4 x 5/8" flat head wood screw, for trigger-plate or toe-plate.       SCREW-4X58 . . . $0.20

Machine screw, 5-40 thread, flat head for countersink, slotted, unplated steel, 5/16" long Screw, 5-40 thread, flat head for countersink, slotted, unplated steel, 0.305" length       SCREW-5-40-F . . . $0.30

Machine screw, for underrib, 5-40 thread, unplated, steel This nice quality unplated #5-40 flat head screw is made for mounting a rib, or for mounting any Hawken or English triggerguard which lacks a threaded stud, to a triggerplate. Overall length is 0.290" A bit smaller diameter than our #6-40 rib screw, that larger screw can easily be used to replace a worn #5-40 rib screw, when a worn or damaged overs       SCREW-5-40-R . . . $1.49

Machine screw, for underrib, 6-40 thread, unplated, steel This nice quality unplated #6-40 flat head screw is made for mounting a rib, or for mounting any Hawken or English triggerguard which lacks a threaded stud, to a triggerplate. Overall length 0.3", thread journal 0.2". A bit larger diameter than our standard #5-40 rib screw, this screw can easily be used to replace a worn #5-40 rib screw, when the       SCREW-6-40-R . . . $1.49

Machine screw, for underrib, 6-48 thread, unplated, steel This nice quality unplated No. 6-48 fillister head screw is made for mounting a rib, or rear sight. Overall length is 0.305" This is a popular gunsmithing screw thread size, often used on modern telescope mounts, T/C rifle ribs. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of       SCREW-6-48-R . . . $1.99

Sight base screw , 6-48 thread, for Thompson Center rear sight, steel This nice quality unplated No. 6-48 fillister head screw is made for mounting a Thompson Center rear sight. Overall length is 0.185". This is a popular gunsmithing screw thread size, often used on modern telescope mounts. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this       SCREW-6-48-SB . . . $2.99

Machine screw, for Thompson Center underrib, 6-48 thread, unplated, steel This nice quality unplated No. 6-48 screw is made for mounting a Thompson Center underrib. The screw has a overall length of .3" with a .186" diameter head, .055" thick. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this screw, at low cost.       SCREW-6-48-TC-RIB . . . $2.99

Machine screw, for Thompson Center ramrod pipe, 6-48 thread, slotted, unplated, steel This nice quality unplated No. 6-48 screw is made for mounting a Thompson Center ramrod pipe to a underrib. The screw has a overall length of .375" with a .2" diameter head, .05" thick. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this screw, at low cost.       SCREW-6-48-TC-ROD-PIPE . . . $2.99

has been added to your .

---