Sideplate , for C.V.A. Mountain Rifle and other models with a steel sideplate, steel Sideplate for a Connecticut Valley Arms Mountain Rifle and other models that use a steel sideplate. Fits into a counter bore in the stock. 0.58" (15mm) outside diameter, Counter-bored to accept the factory lock bolt head.       SP-CVA-MTN-I . . . $6.99

Sideplate , for Thompson Center Renegade Rifle and other models with a steel sideplate, steel Sideplate for a Thompson Center Renegade Rifle and other models that use a steel sideplate. This a replica of the later production sideplate that fits flush with the side panel. 3/4" outside diameter, Counter-bored to accept the factory 1/4" diameter lock bolt head.       SP-TC-H-I . . . $5.99

Drill Bits Our drill bits make gunsmithing easier. General purpose hardware store drill bits have a 118 degree 'chisel point' to work well when drilling wood. Our High Speed Steel drill bits are precision ground to a 135 degree point, for drilling steel, with a tiny self-centering 'split point' tip!

Bullet Molds, for Black Powder Cartridges, by Lee Lee Black Powder Cartridge molds are aluminum blocks, in permanently attached steel handles with sturdy grips. Aluminum blocks won’t rust, lead won’t adhere, and they heat quickly. But they are softer than blued steel and require gentle handling. If you treat these high precision molds with care and respect, they will last a lifetime. The cavity c

Bullet Molds, for Percussion Revolver bullets, by Lee Lee molds are aluminum blocks, in permanently attached steel handles with sturdy grips. Aluminum blocks won't rust, lead won't adhere, and they heat quickly. But they are softer than blued steel and require gentle handling. If you treat these high precision molds with care and respect, they will last a lifetime. The cavity cannot rust. Gently bre

Bullet Molds, for Maxi, Minie, & R.E.A.L. bullets, by Lee Lee molds are aluminum blocks, in permanently attached steel handles with sturdy grips. Aluminum blocks won't rust, lead won't adhere, and they heat quickly. But they are softer than blued steel and require gentle handling. If you treat these high precision molds with care and respect, they will last a lifetime. The cavity cannot rust. Cavity is f

Bullet Molds, for Round Balls, by Lee Lee round ball molds are aluminum blocks, in permanently attached steel handles with sturdy grips. Aluminum blocks won't rust, lead won't adhere, and they heat quickly. But they are softer than blued steel and require gentle handling. If you treat these high precision molds with care and respect, they will last a lifetime. The cavity cannot rust.

Ramrod Handles, balls & T handles Maple Balls for rod handles & starters: Our 1-3/4" maple balls make great handles for ramrods, or for making your own ball starter. Available sanded but not drilled, or drilled and fitted with our 8-32 or 10-32 steel bolt to screw into your ramrod tip, for use as a handle. Heavy Duty "T" handle for ramrod: Sturdy aluminum "T" handle has steel 8

Drill Bits, tap drills & clearance drills Our drill bits make gunsmithing easier. General purpose hardware store drill bits have a 118 degree 'chisel point' to work well when drilling wood. Our High Speed Steel drill bits are precision ground to a 135 degree point, for drilling steel, with a tiny self-centering 'split point' tip!

Cleaning Rods, finished, with handles Creedmore Gun Rods, of stainless steel: Muzzleloading Creedmore rods have the same comfortable handle on a one piece stainless rod, but do not rotate. The rigid handle allows this rod to be used with a bullet puller. Each rod includes a rod guide to center the rod in the bore for cleaning from the muzzle to the breech. Stainless steel 5/16" rod h

Adaptors, for other thread sizes Musket Ramrod Adaptor, shown above in the middle Adaptor for metric steel musket ramrods, fots a ball puller, jag or worm. Available in 10-32 threads only, to fit the Brown Bess and Charleville or the Enfield. 8-32 to 10-32 Conversion Adaptors, shown on the far right. Our brass adaptor will allow you to interchange 8-32 and 10-32 jagged tips an

Ramrod Handles, T & ball handles Maple Balls for rod handles & starters: Our 1-3/4" maple balls make great handles for ramrods, or for making your own ball starter. Available sanded but not drilled, or drilled and fitted with our 8-32 or 10-32 steel bolt to screw into your ramrod tip, for use as a handle. Heavy Duty "T" handle for ramrod: Sturdy aluminum "T" handle has steel 8

Buttons, steel

Creedmoor Cleaning and Loading Ramrods, stainless steel with handle

Bluing reagents for steel

Browning reagents for steel

Buttons, steel

Ball Pullers, steel screws with brass collars Ball pullers with or without brass collar, representative image shown. Brass collar size will vary by caliber. Use 8-32 to fit standard rods, and 10-32 to fit Thompson Center, CVA, Lyman, Traditions, and most Italian or Spanish guns.

Ball Pullers, steel screws with brass collars Ball pullers with or without brass collar. Representive ball puller shown, collar diameter will vary by caliber. Use for 8-32 threads to fit standard rods, and 10-32 threads to fit Thompson Center, CVA, Lyman, Traditions, and most Italian or Spanish guns.

Lock Bolts, unplated steel

Tang Bolts, unplated steel

Screws & Pins, unplated steel

Hand Stamp for British Proof Mark , Birmingham Proof for post 1813, hardened steel, made in the USA, by Track of the Wolf, Inc. The Birmingham proof mark was used post 1813 for proofing black powder barrels. Typically placed below the view mark on the off flat of the breech. We have examined this stamp on Trade Guns by both Barbar, and Sharpe. Due to the large size of this stamp it can only be used on octagon barrels that are 1-1/8" or larger. The inspector's mark is about       STAMP-BPC-1813 . . . $29.99

has been added to your .

---