Your search for 'steel'
returned
2,061 results.
|
Trigger plate , Tulle fusil-de-chasse, integral pivot arms, wax cast steel
Pre-inlet into our Tulle fusil-de-chasse stock, this trigger plate has a high pivot, for a light trigger pull. The lock plate may be drilled and tapped for a tang screw ahead of the trigger. The slot is .093" wide and is designed to accept our #TR-TULLE-1-T trigger. Pivot point is clearly marked in this steel wax casting.
|
|
Trigger & Trigger Plate , for our Isaac Haines, Lancaster County stock, wax cast steel
Trigger and plate, assembled from steel wax castings. Plate tapers from .475" at widest point to .300" at rear, narrowing at front. Curled trigger is about .330" wide, with scroll back. Not very high, this trigger allows for a very thin wrist, and is pre-inlet into our special fancy fully pre-shaped Isaac Haines style Lancaster County stock. Made i
|
|
Underlug , for key, milled steel, .750" dovetail
Our UL-36 lug is milled steel, for standard sized keys. Popularly used on Hawken and similar Plains rifles, the slot measures .5" x .12". It fits our favorite KEY-36-B or I as cast. Some gentle peening can compress it, to hold thinner keys snugly. The dovetail is about .75" long by .5" wide. Mount it to the bottom of the barrel in a 0.050" deep dov
|
|
Underlug, for pin or swivel, milled steel, .500" dovetail
Our new UL-DH-1 lug is tall and may be cut down, ideal for supporting a sling swivel, barrel pin, or slot it for a tiny wedge key. Milled steel, the dovetail is 0.500" long, by 0.46" wide. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.285" above the base. Most rifles will use three underlugs, while bar
|
|
Underlug for pin, milled steel, .500" dovetail
Our UL-NW-1 is a good choice for most longrifles using barrel pins. Milled steel, the dovetail is 0.500" long, by 0.46" wide. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. Most rifles will use three underlugs, while barrels longer than 42" use four. Made in the U.S.A.
|
|
Underlug for key, milled steel, .600" dovetail, slotted for key
Our UL-NW-2 lug is slotted for a tiny key. The slot measures only about .250" x .087". Enlarge this slot with a file, as necessary. Ideal for use with our 3/32" pin, the long slot allows the barrel expansion when hot. Milled steel, the flat base is about .500" wide, and the dovetail is .600" long. Use it on fullstock rifles.
|
|
Underlug for key, milled steel, .750" dovetail, slotted for key
Our UL-NW-3 is sloted for our No. 58 key. Milled steel, the flat base is .465" wide, by .750" long, with a large surface for a good solder joint, if desired. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. The slot is 0.93" tall by 0.42" long (square the slot to use the full width). M
|
|
Underlug for pin, milled steel, .750" dovetail
Our UL-NW-4 is a bit longer, to fill old dovetails, or to slot for your key. Milled steel, the flat base is .465" wide, by .750" long, with a large surface for a good solder joint, if desired. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. Most rifles will use three underlugs, while
|
|
Underlug for pin, milled steel, concave, solder to round barrel
Our UL-NW-S1 lug is our small solid lug, intended for use with our 3/32" pin. The concave base may be soldered to your round barrel. Milled steel, the base is about ..500" long by 0.460" wide. The blade stands .21" above the base. Recommended for the Tulle fusil de chasse and the English fowler. Made in the U.S.A.
|
|
Underlug for pin, milled steel, concave, solder to round barrel
Our UL-NW-S2 is a bit longer, for use where a larger stronger joint is required. We recommend using this lug to support a sling swivel mounted on your musket's forend. Milled steel, the concave base is .500" wide, .740" long. Use 96% tin + 4% silver lead free solder. It melts at low temperature, but is stronger than lead-tin solder.
|
|
Patch puller, primitive corkscrew worm, large, steel, fits plain rod
A tapered coil of tempered spring steel, simple in design, and very clever. Like a Chinese finger puzzle, it grips tight and holds your patch or tow (fiber waste). Works well on a plain rod, without a tip. Use our large worm for your musket, fowler, shotgun, tradegun, or fusil. The inner diameter is .27" to .39". The outer diameter is .38" to .49".
|
|
Patch puller, primitive corkscrew worm, small, steel, fits plain rod
A tapered coil of tempered spring steel, simple in design, and very clever. Like a Chinese finger puzzle, it grips tight and holds your patch or tow (fiber waste). Works well on a plain rod, without a tip. Use our small worm for your rifle or pistol. The inner diameter is .21" to .28". The outer diameter is .34" to .40".
|
|
Bullet Molds, for Cowboy Action Shooting, by Lyman
Silver Star Bullets were designed specifically for cowboy action shooters. All feature a nose that aligns perfectly in the cylinder throat to ensure best possible accuracy and a crimp groove that maintains the proper overall length in both rifle and pistol use. Lyman Mold Handles: Steel handles attach to blocks with slotted screws. Hardwood handle
|
|
Cards & wads for muzzle loading shotguns
Our muzzleloading wads are full bore diameter. Most modern wads are made undersize, to fit within a paper or plastic cartridge case. Specify the gauge and wad or card type: "A" card: .125" thick, over powder, waterproof, to seal the powder charge. 1000 per bag. "B" card: .025" thick over shot card, to h
|
|
|
Ramrods, for popular replica rifles; CVA, Lyman, Thompson Center, etc.
We offer these finished ramrods, made of space-age synthetic material. Strong and flexible, these are almost unbreakable. Smooth and non-abrasive, these ramrods will never wear your muzzle like a fiberglas rod might. Made of sturdy Delrin nylon, we offer several lengths and styles: Replacement Ramrods are made to fit popular rifles: We make versi
|
|
Jags, jagged tips for cleaning patches
A jagged tip, called a cleaning jag, is the proper tool for wiping the bore. Use a wet or oily patch. Never use a dry patch. It may become stuck. Made of brass, with strong steel threads in 8-32 or 10-32.
|
|
Jags, jagged tips & tulip tips, for shotguns
Shotgun Button Jagged Tip Brass cleaning jag, with 8-32 or 10-32 steel threads to fit our standard rod tips. Flat end squarely seats cards and wads. Jagged edges grip the damp patch securely while wiping the dirty bore between shots. Shotgun Jagged Tulip Tip Brass shotgun jagged tulip tip, for cleaning and loading, installs directly on ramrod.
|
|
Jags, jagged tips with button head, for small rods
Brass button jags are used on small diameter ramrods and cleaning rods where a tapered shank is not necessary for patch clearance. Durango rods accept our 8-32 button jags. All these have sturdy steel threads, and a cupped end for easy loading.
|
|
Ramrod Guides, bore protectors
Knurled brass rim with polished cone. Protect your muzzle from abrasive fiberglas, aluminum, steel, brass, resin-impregnated, plastic, or wooded ramrods. Any dirty ramrod can wear the muzzle!
|
|
Ramrod Tips
Shotgun Tulip Tips Brass tulip loading tips. Installs directly on ramrod. Flat end to seat your shotgun wads and cards squarely! Ramrod tips in brass, steel, or selected sizes in nickel silver: A concave end prevents damage to the ball. Threaded 8-32 or 10-32 to accept jags, scrapers, adaptors, worms, or ball pullers.
|