French Fusil Fin Buttplate , wax cast steel Overall length 5-1/8", width 2", comb 5" An elegantly embellished buttplate, with fancy comb finial, used on the French Fusil fin (fine light musket). Sometimes called a French trade gun, refer to Colonial Frontier Guns for photos and descriptions of these antiques. We have the parts to replicate the gun of your choice. Available in wax cast brass or steel. Overall length 5-1/8", width 2"       BP-FIN-I . . . $35.00

Flint Fowling Gun Buttplate , wax cast steel Overall length 5", width 2", comb 5-7/8" This wide early buttplate fits our pre-carved flint fowling gun stock, and is ideal for use on flint fowling guns, fusils, muskets, or early flint rifles. The pointed finial design works well on a quasi-military arm, Officer's fusil, Committee of Safety musket, Sergeant's musket, or Chief's Trade Gun. Reshape the comb for use on a longrifle. Availa       BP-FOWL-20-I . . . $35.00

French Fusil Fin Trade Gun Buttplate , wax cast steel Overall length 5", width 2", comb 4-1/2" This buttplate exactly replicates the style used on the French "fusil fin" trade guns that were widely traded in the 1730-1760 era throughout America. These beautiful weapons can be seen in T.M. Hamilton's Colonial Frontier Guns. Many "fusil fin" trade guns were restocked into American fowlers, particularly in New England. Copied from an original f       BP-FOWL-4-I . . . $35.00

Early Hawken Rifle Buttplate , wax cast steel Overall length 4-7/8", width 1-7/16", comb 3-1/8" Our widest Hawken style buttplate, for large bore halfstock rifles. This slender casting is styled like our classic late Hawken buttplate, but made wider to lessen recoil. The comb gently tapers upward when viewed from the side, and narrows from the heel to toe when viewed from above. Often used on fullstock Hawken flint or percussion rifles, which       BP-HAWK-E-I . . . $32.99

Jim Bridger Classic Early Hawken Buttplate , wax cast steel Overall length 4-5/8", width 1-3/8", comb 2-7/8" With more "crown" and thicker webbing, this buttplate is made for our Jim Bridger's Hawken fully inlet precarved halfstock. The Bridger Hawken with a 1-1/8" octagon barrel. Shown elsewhere, these parts were made famous by Green River Rifle Works. Available in wax cast steel or brass. Overall length 4-5/8", width 1-3/8", comb 2-7/8".       BP-HAWK-JB-I . . . $32.99

Late Hawken Narrow Buttplate , wax cast steel Overall length 4-15/16", width 1-2/10", comb 2-7/8" Our narrow late Hawken buttplate, for classic halfstock Plains rifles. This is our most popular, best selling Hawken buttplate. Flat enough to be comfortable with heavy loads, curved for secure hold. Use this buttplate on Hawken percussion rifles with the "beavertail" cheekpiece, two keys, and hooked breech. Wax cast, these may be bent cold. Availa       BP-HAWK-L-I . . . $32.99

Early Hawken Buttplate , wax cast steel Overall length 5-1/4", width 1-1/4", comb 3-1/8" Our longest Hawken buttplate, for an early halfstock or fullstock Hawken Plains rifle. Flat enough to be comfortable with heavy loads, curved for secure hold. Use this buttplate on a flint or percussion rifle. Available in wax cast steel. Overall length 5-1/4", width 1-1/4", comb 3-1/8".       BP-HAWK-SE-I . . . $32.99

Germanic, Jeager Acanthus Leaf Buttplate , wax cast steel Overall length 4-7/8", width 2-1/16", comb 6" Used on a fancy Jaeger hunting rifle, the comb of this buttplate is asymmetric, ( this means that the sides on the comb are NOT the same. They are not symmetric ) in shape of an acanthus leaf, a popular baroque motif. Polish the comb and engrave it with baroque or rococo shells, scrolls or foliage. A few simple lines are typical of early American f       BP-JAEG-21-I . . . $35.00

Lancaster Style Buttplate , wax cast steel Overall length 5", width 1-7/8", comb 2-9/16" Pre-Revolutionary War, Lancaster County. Use this on a Jacob Dickert style rifle. Our patchbox #PB-KIT-9, would be an excellent choice to accompany this buttplate. Available in wax cast brass or steel. Overall length 5", width 1-7/8", comb 2-9/16".       BP-LANC-2-I . . . $32.99

Buttplate, H. E. Leman Trade Rifle , wax cast steel Overall length 4-5/16", width 1-3/8", comb 2-13/16" Similiar to a Hawken buttplate, but smaller, this wax cast buttplate is made for use on a replica Henry E. Leman Trade Rifle. The heel of the buttplate has a slight upward tip. This minor detail is found on antique examples. The top of the buttplate comb has a flat, gently break the edges of the flat when polishing. The toe has a very slight downwa       BP-LEMAN-1-I . . . $32.99

Reading School Buttplate , circa 1790, wax cast steel Overall length 5-1/8", width 1-5/8", comb 2-1/2" From the Reading School. Copied from a John Bonewitz rilfe, circa 1790 . Matching patchbox available from the same rifle, shown in Kentucky Rifles & Pistols 1750 -1850 . Available in wax cast brass or steel. Overall length 5-1/8", width 1-5/8", comb 2-1/2".       BP-READ-1-I . . . $32.99

Schuetzen buttplate , wax cast steel Overall length 5-3/16", width 1-7/16", comb 2-1/16" Very similar to our BP-MA-80-B buttplate, except this wax casting has a shorter comb. Perhaps it will be a bit easier to inlet. It certainly can be duburred and polished quickly. Available in wax cast brass or steel. Overall length 5-3/16", width 1-7/16", comb 2-1/16".       BP-SCH-80-I . . . $35.00

Schuetzen Double Ball End buttplate , wax cast steel Overall length 5-3/16", width 1-3/8", comb 3-3/8" We call it our "double ball end" Schuetzen buttplate. It has a very short top comb projection. Smooth curves make it moderately easy to inlet. Shooters will find it comfortable to handle, aim, and load. A bit heavier than some other Schuetzen buttplate castings, but not nearly so heavy as the big bench rest variations. This sturdy design is made fo       BP-SCH-90-I . . . $35.00

Southern Mountain Style Buttplate , diamond shaped, wax cast steel Overall length 4-7/16", width 1-9/16", comb 4" This Southern Mountain longrifle style buttplate has a distinctive diamond shape, when viewed from the butt end. This dictates the shape of the buttstock, making a truly graceful longrifle. We suggest our similar Southern Mountain wax cast triggerguard #TG-SM-1-I to compliment this buttplate. Yes, this buttplate can be bent cold, if necessary. Avai       BP-SM-1-I . . . $32.99

Tennessee Bean Style Buttplate , wax cast steel Overall length 4-1/2", width 1-1/4", comb 3-3/8" A lighter more graceful Tennessee longrifle style buttplate, sometimes called the Bean buttplate, in honor of one of Tennessee's most famous makers. Made in iron only, this wax casting may be bent cold to reduce the amount of curvature a small amount. We recommend using this on a fancy maple fullstock, with a round end banana patchbox. Be sure to o       BP-TN-2-I . . . $34.99

French TULLE Fusil de Chasse Buttplate , wax cast steel Overall length 4-13/16", width 1-15/16", comb 3-3/8" The French fusil de chasse (light gun for the hunt) is plainer than fancy decorated trade guns. Lighter than infantry muskets, they were the choice of civilians, French Marines, and clever Indians, when available. This buttplate if patterned from a original Tulle fusil de chasse, circa 1727, in our collection. The comb has a long bulbous shape simi       BP-TULLE-2-I . . . $32.99

Vincent Rifle Buttplate , wax cast steel Overall length 4-1/8", width 1-1/16", comb 3-1/2" Used by the famous Vincent family, many Ohio longrifle makers used thin curved buttplates. This buttplate fits our fully inlet Vincent preshaped halfstock. We also offer the signed "Goulcher" lock, and other matching Vincent parts. Available in wax cast brass (traditional) or steel. Overall length 4-1/8", width 1-1/16", comb 3-1/2".       BP-VINC-1-I . . . $32.99

Chasing hammer, forged steel 1" face with round end for peening, 9" handle Forged steel head with 1-1/16" flat surface for striking chasing tools or planishing metal and a round end for peening. Pistol grip wooden handle, overall length 9".       CHASE-HAMMER . . . $17.99

Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, #11 CCI cap, stainless steel Cone length: 0.475" Thread journal length: 0.275" Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, #11 CCI cap, stainless steel Cone length: 0.475" Thread journal length: 0.275" Overall length: 0.750" Diameter of base: 0.370"       ERS-S . . . $7.99

Plains Rifle Forend Cap , 13/16" octagon, wax cast steel Plains Rifle Forend Cap , for 13/16" octagon barrels, wax cast steel. This forend cap is shaped for a 3/8" diameter ramrod with a .22" web thickness.       FC-PA-13-I . . . $14.99

Plains Rifle Forend Cap , 7/8" octagon, wax cast steel Plains Rifle Forend Cap , for 7/8" octagon barrels, wax cast steel. This forend cap is shaped for a 3/8" diameter ramrod with a .22" web thickness.       FC-PA-14-I . . . $14.99

Plains Rifle Forend Cap, 15/16" octagon, wax cast steel Plains Rifle Forend Cap , for 15/16" octagon barrels, wax cast steel. This forend cap is shaped for a 3/8" diameter ramrod with a .22" web thickness.       FC-PA-15-I . . . $14.99

Plains Rifle Forend Cap , 1" octagon, wax cast steel Plains Rifle Forend Cap, for 1" octagon barrels, wax cast steel. This forend cap is shaped for a 7/16" diameter ramrod with a .22" web thickness.       FC-PA-16-I . . . $14.99

Plains Rifle Forend Cap , 1-1/16" octagon, wax cast steel Plains Rifle Forend Cap, for 1" octagon barrel, wax cast steel. Thin web for 1/4" rib. This forend cap is shaped for a 7/16" diameter ramrod with a .22" web thickness.       FC-PA-17-I . . . $14.29

Plains Rifle Forend Cap , 1-1/8" octagon, wax cast steel Plains Rifle Forend Cap, for 1-1/8" octagon barrels, wax cast steel. This forend cap is shaped for a 7/16" diameter ramrod with a .22" web thickness.       FC-PA-18-I . . . $14.99

has been added to your .

---