Carbon steel graver, #4 square engraver, about .074" square shank marked #4 Square Gravers: Square is probably the most widely used and can be sharpened as a point, or a chisel. No. 1 is the smallest square, no. 5 the largest.       GRAVER-S-4 . . . $9.29

Carbon steel graver, #5 square engraver, about .086" square shank marked #5 Square Gravers: Square is probably the most widely used and can be sharpened as a point, or a chisel. No. 1 is the smallest square, no. 5 the largest.       GRAVER-S-5 . . . $9.29

Carbon steel graver, #1 tapered lozenge engraver Tapered Lozenge Graver Preferred for fine work, script lettering. No. 1 is the smallest square, no. 2 the largest.       GRAVER-T-1 . . . $9.99

Carbon steel graver, #2 tapered lozenge engraver Tapered Lozenge Graver Preferred for fine work, script lettering. No. 1 is the smallest square, no. 2 the largest.       GRAVER-T-2 . . . $9.99

Nipple , Hot Shot® for CVA, Traditions, or other Spanish mfg. rifles, 6-1mm metric thread, for #11 CCI cap, stainless steel Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"       HOT-SHOT-CVA . . . $6.99

Nipple , Hot Shot® for Lyman & InvestArms, 6-.75mm thread, for #11 CCI cap, stainless steel Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"       HOT-SHOT-RLP . . . $6.99

Nipple , Hot Shot® for Thompson Center Hawken & other popular guns, 1/4-28 thread, #11 CCI cap, stainless steel Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"       HOT-SHOT-RST . . . $6.99

Inlay , Tiny Oval, 0.75" by 0.29" steel 0.040" thick Tiny oval inlays, for longrifle forend pins.       IN-OVAL-1-I . . . $1.20

Inlay , Tiny Oval, 1" by 0.38", steel 0.040" thick Tiny oval inlays, for longrifle forend pins       IN-OVAL-2-I . . . $1.20

Inlay , Small Oval, 1.1" by 0.55" steel 0.040" thick Small oval inlays, for longrifle forend pins.       IN-OVAL-3-I . . . $1.20

Inlay , Small Oval, 1.35" by 0.50", steel 0.040" thick Small oval inlay, for longrifle forend pins. 1-11/32"(1.35") long by 1/2" (0.5") tall.       IN-OVAL-4-I . . . $1.20

Inlay , Tiny Slotted Oval, 0.75" by 0.38", steel 0.040" thick, slot 0.072" b 0.375" This tiny oval has a slot about .072 x .375" for a wedge key.       IN-SLOT-1-I . . . $1.20

Inlay , Slotted Oval, 1.11" by 0.55", steel 0.062" thick slot is 0.103" by 0.365" Slotted oval inlay, for rifles with wedge key. Inlays exactly fits our #Key-36. Little or no filing is required. Cut from heavy stock, slotted, drilled, countersunk for our #3 x 1/4" screws, sold separately. The oval is 1.11" wide by 0.55" tall. The slot is .103 x .365" exactly.       IN-SLOT-2-I . . . $2.99

Inlay , Slotted Oval, 1.11" by 0.55", steel 0.050" thick slot is 0.13" by 0.37"iron Slotted oval inlays, for rifles with wedge keys. Has a .13 x .37" slot, and holes for screws.       IN-SLOT-4-I . . . $1.20

Inlay , Slotted Oval, 1.12" by 0.55", oxide finished steel 0.050" thick slot is 0.14" by 0.41" Slotted oval inlays, for rifles with wedge keys. Has a .14 by .41" slot, and holes for screws.       IN-SLOT-6-I . . . $1.20

Thumbpiece , English Fowling Gun, wax cast steel Thumbpiece inlay, from 1750 era English fowling gun. This thumbpiece measures 2-1/4" tall, and 1-1/8" at the widest point.       IN-THUMB-1-I . . . $14.99

Wedge key , wax cast steel, extra long, slotted for capture pin This extra long slotted wedge key key measures .325" wide by .114" thick by 1-3/4" long. As cast slot is 1/16" wide by 1-1/32". The head is slanted slightly, to fit the curvature of your big rifle's extra wide forend. Use it on 1-1/4" or wider barrels, or shorten this key as needed to fit a typical rifle.       KEY-G-194-L . . . $6.59

Wedge Key, for Thompson Center New Englander Rifle, blued steel Wedge Key, for use with Thompson Center New Englander. Key is 0.340" wide x 0.1" thick. Length beneath head is 1.46" long. Made in the U.S.A.       KEY-TC-NE . . . $14.99

Wedge Key, for Thompson Center Seneca, Cherokee, or Patriot, blued steel Wedge Key, for use with Thompson Center Seneca, Cherokee, or Patriot pistol. Key is 0.297" wide x 0.090" thick. Length beneath head is 1.26".       KEY-TC-SEN . . . $14.99

Classic Russell's Green River Trade Knife , 5" carbon steel blade, maple handle, made in the U.S.A. This classic Russell's Green River Knife has a 9" overall length. The blade has a 5" edge, and 0.08" thick blade it is properly tempered to sharpen quickly and hold an edge. The handles are nicely finished curly maple scales, secured with three brass rivets. Made in the U.S.A. Same day shipment, when you click ADD TO CART and complete shopping car       KNIFE-RGR-05-M-F . . . $49.99

Russell's Ripper Trade Knife , 4" Russell carbon steel blade, maple handle, made in the U.S.A. This Russell's Ripper Trade Knife has a 8-1/4" overall length. The blade has a 4" edge, and 0.07" thick blade it is properly tempered to sharpen quickly and hold an edge. The handles are nicely finished curly maple scales, secured with three brass rivets. Made in the U.S.A. Same day shipment, when you click ADD TO CART and complete shopping cart c       KNIFE-RIP-04-M-F . . . $49.99

Mainspring , wax cast steel, tempered       LOCK-1750-MS . . . $25.50

Mainspring, well tempered steel, wax cast in the USA, to fit your GRICE - 1762 Brown Bess Musket lock by Davide Pedersoli or Tower, Stowe, et cetera A replacement mainspring for your David Pedesoli Second Model Brown Bess lock. Commonly marked GRICE - 1762 . The spring has a 3.54" overall length. Center of mounting lug to bearing arm is 3". Early production Brown Bess flint locks were sometimes marked STOWE and a scarce flat faced version was marked FREDRICKSBURG . These early lock will req       LOCK-BESS-GRICE-1762-MS . . . $25.50

Cock , 1.625" throw, not tapped, wax cast steel       LOCK-COLONIAL-F-CO . . . $17.99

Frizzen , as cast, wax cast steel       LOCK-COLONIAL-F-FR . . . $21.99

has been added to your .

---