The target style front trigger has no lever to engage the sear. The trigger must be set to fire the lock. Wax cast steel parts are tempered. We stock spare parts, rarely needed unless you bend a part. We can supply annealed triggers on request.
This trigger is a precision assembly made with heat treated tool steel. If either trigger must be bent to fit the triggerguard, heat the trigger to a cherry red and bend while hot. Reharden by heating to cherry red and quenching in 10W oil or mineral oil. Temper by heating to 550 degrees for 1 hour in a kitchen oven. The trigger bar can be bent slightly without heating.
Overall length 5-1/4", bar .400" wide.
This trigger is a precision assembly made with heat treated tool steel. If either trigger must be bent to fit the triggerguard, heat the trigger to a cherry red and bend while hot. Reharden by heating to cherry red and quenching in 10W oil or mineral oil. Temper by heating to 550 degrees for 1 hour in a kitchen oven. The trigger bar can be bent slightly without heating.
Overall length 5-1/4", bar .400" wide.
PIN-3-32
Steel Dowel Pin, 3/32" diameter, 1-1/4", hardened, for lug, pipe, guard, or trigger pivot pin
TR-DST-1-FT
Trigger, front, tempered steel, for #TR-DST-1 double set triggers
TR-DST-1-FTS
Front trigger spring, tempered steel, fits several double set triggers
TR-DST-1-MS
Trigger mainspring, tempered steel, fits several double set triggers
TR-DST-1-MSX
Trigger mainspring screw, 3/8", 6-40 thread, fits several double set triggers
TR-DST-1-PL
Ttrigger plate, for DST-1 trigger, as cast, plate only, .400" wide
TR-DST-1-RT
Trigger, rear, tempered steel, for #TR-DST-1 double set triggers
TR-DST-1-TAX
Trigger adjustment screw, 3-48 thread, fits several double set triggers
Adobe Reader required to view the files below.
page_350.pdf
Last updated: 4/25/2012 (83 KB)