After about 1840, factory produced locks became widely available. Sometimes marked with the maker's name, often marked “Warranted", these slim percussion locks became popular on Ohio and plains rifles.
Our plug and tang is made to fit a 1" octagon barrel with 3/4-16 threads. Our “Warranted" style right lock is cut for this plug and tang.
Fitted with a fly detent and a swivel link with integral pins, this lock is pre-cut for our #Plug-LR-16-3 or PLUG-LR-15-5 hooked breech plug and tang.
This matching lock and plug are currently made in right hand, only.
LOCK-LR-100-BR
Bridle, wax cast steel, tempered, use 6-40 screws
LOCK-LR-100-BX
Bridle screw, 6-40 thread
LOCK-LR-100-FL
Fly detent, steel, tempered, with hole for pivot
LOCK-LR-100-HA
Hammer, right, wax cast steel, 1.75" throw
LOCK-LR-100-LI
Stirrup link, wax cast steel, tempered, integral pins
LOCK-LR-100-MS
Mainspring, wax cast steel, tempered
LOCK-LR-100-SE
Sear, wax cast steel, tempered, use 6-40 screw
LOCK-LR-100-SS
Sear spring, die formed steel, tempered
LOCK-LR-100-SSX
Sear spring screw, 6-40 thread
LOCK-LR-100-SX
Sear screw, .59" length, 6-40 thread
LOCK-LR-100-TU
Tumbler, wax cast steel, tempered, cut for fly, tapped 6-40
LOCK-LR-100-TX
Tumbler screw, .400" head diameter, 6-40 thread
LOCK-LR-150-PL
Lock plate, wax cast steel, 4.62" x 1.00", tapped 6-40
PLUG-LR-16-3
Hawken 1" slant faced breech & tang,
3/4-16 thread,
by L&R
TOOL-VISE
Mainspring Vise,
to safely compress a mainspring
TOOL-VISE-DX
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
