Build Track's Colonial Longrifle parts set, with 13/16", 7/8", or 15/16" straight octagon barrel Price: starting at $953.50 These parts have been specially chosen to replicate a fine early longrifle, typical of those made during and after our Revolutionary War. This set is now shown with wax castings which are much easier to clean-up than sand castings. Our default barrel choice is a quality U.S. made straight octagon barrel blank with other manufacturers barrels availa

Build Track's Jacob Dickert , Lancaster County, Pennsylvania longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $1,084.80 Build Track's Jacob Dickert Lancaster kit, easy to assemble, up to 42" octagon barrel, traditional brass, or iron trim, plain or fancy maple stock We offer these fine Lancaster County style parts, modeled after the work of Jacob Dickert. Arriving from Germany to America about 1750, he studied under a unknown master learning the gunmakers art. He

1863 Remington Contract Rifle , known as the Zouave Musket, .58 caliber, 33" barrel, percussion, beech, used, by Miroku for Ultra-Hi The famous U. S. Model 1863 Contract Rifle was originally manufactured by Remington. Unlike Springfield or Enfield muskets, this model is trimmed in brass, with a patchbox, and folding leaf rear sight with three leaves, for 100 yards, 200 yards, and 300 yards. Not well known today, the elite Zouave troops of 1860 were dressed in Arabian style unifo       AAW-443 . . . $299.00

Build Track's Bedford flintlock longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $1,049.80 Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l

Build Track's Bedford percussion longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $984.09 Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l

Build Track's Kentucky pistol with 13/16" straight octagon barrel, L&R John Bailes percussion lock Price: starting at $544.83 Build Track's flint lock Kentucky pistol parts set and replicate one of the rarest frontier accoutrement's. Building a Kentucky pistol requires all the same skills and techniques used to assemble a longrifle. Use of a drill press in recommended. A skilled mentor, as always, can be a invaluable aid in building any rifle or pistol project. Select a a

LEE Loading Dies , caliber .43 Spanish, including standard shell holder Lee Limited Production Pace-setter dies include full length sizer, bullet seater and roll crimper, built in stuck case remover, long guided expander, standard shell holder, powder dipper, load data and instructions. The Lee No. 17 shell holder included is cut to accept 0.087" rim thickness. Antique rifles are chambered to accept the .090" rim thick       LEE-DIE-43-SPANISH . . . $38.99

stock, Isaac Haines , fully shaped, pre-inlet, "B" profile 38" swamped barrel, large Siler lock, fancy maple Precision machine inlet on a 5 axis pantograph. Our “B” profile stock is pre-inlet for a standard weight barrel in .40, .45, or .50 caliber. All are cut for Siler’s large lock, our small Bivins’ buttplate, triggerguard, rod pipes, and curled trigger. We offer a complete set of wax castings in iron or brass, to fit this rifle. Right hand stocks are       STK-IH-B-M3-XR . . . $330.00

stock, Isaac Haines , fully shaped, pre-inlet, "B" profile 38" swamped barrel, large Siler lock, extra fancy maple Precision machine inlet on a 5 axis pantograph. Our “B” profile stock is pre-inlet for a standard weight barrel in .40, .45, or .50 caliber. All are cut for Siler’s large lock, our small Bivins’ buttplate, triggerguard, rod pipes, and curled trigger. We offer a complete set of wax castings in iron or brass, to fit this rifle. Right hand stocks are       STK-IH-B-M4-XR . . . $470.00

stock, Isaac Haines , fully shaped, pre-inlet, "C" profile 38" swamped barrel, large Siler lock, plain maple Precision machine inlet on a 5 axis pantograph. Our "C" profile stock is inlet for a heavy weight barrel in .50, or .54 caliber. All are cut for Siler’s large lock, our small Bivins’ buttplate, triggerguard, ramrod rod pipes, and triggerplate for single trigger. We offer a complete set of wax castings in iron or brass, to fit this rifle. Right hand       STK-IH-C-M1-XR . . . $259.00

stock, Isaac Haines , fully shaped, pre-inlet, "C" profile 38" swamped barrel, large Siler lock, fancy maple Precision machine inlet on a 5 axis pantograph. Our "C" profile stock is inlet for a heavy weight barrel in .50, or .54 caliber. All are cut for Siler’s large lock, our small Bivins’ buttplate, triggerguard, ramrod rod pipes, and triggerplate for single trigger. We offer a complete set of wax castings in iron or brass, to fit this rifle. Right hand       STK-IH-C-M3-XR . . . $330.00

stock, Isaac Haines , fully shaped, pre-inlet, "C" profile 38" swamped barrel, large Siler lock, extra fancy maple Precision machine inlet on a 5 axis pantograph. Our "C" profile stock is inlet for a heavy weight barrel in .50, or .54 caliber. All are cut for Siler’s large lock, our small Bivins’ buttplate, triggerguard, ramrod rod pipes, and triggerplate for single trigger. We offer a complete set of wax castings in iron or brass, to fit this rifle. Right hand       STK-IH-C-M4-XR . . . $470.00

Isaac Haines , Lancaster County , fully shaped, pre-inlet, "B" or "C" profile 38" swamped barrel, large Siler lock Precision machine inlet on a 5 axis pantograph. Our “B” profile stock is pre-inlet for a standard weight barrel in .40, .45, or .50 caliber. Our "C" profile stock is inlet for a heavy weight barrel in .50, or .54 caliber. All are cut for Siler’s large lock, our small Bivins’ buttplate, triggerguard, ramrod rod pipes, and triggerplate for single tri

Build Track's John & Caleb Vincent, Ohio halfstock rifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $926.81 An 1840 - 1860 vintage Ohio halfstock rifle, in the style of John and Caleb Vincent, signed by talented gunsmith J. Eddie Brown. The highly figured maple stock has been stained to best reveal the stripe and figure. The figure and the reddish undertone combine to make this rifle very appealing to the eye. The classic Vincent style scroll surrounding

Flint Fowling Gun , 24 gauge, 30-1/2" octagon-to-round barrel, flintlock, checkered walnut, iron trim, used, by Ron Paull This half-stock flint fowling gun has English influences and is attributed to Ron Paull . This gun has tight inletting and is neatly finished by that well known builder. Stocked in figured walnut and trimmed in iron furniture, this fowling gun features a finely checkered wrist and wire inlay. The smooth-bore 24 gauge octagon-to-round barrel is bri       AAV-608 . . . $3,999.00

Build Track's J. P. Beck Lebanon Township parts set with "B" or "C" profile, 44" swamped barrel, cut for sliding wood patchbox Price: starting at $1,256.59 Build Track's John Philip Beck Lebanon Township, Lancaster, Pennsylvania, 44" swamped barrel, traditional brass or iron trim, plain, or fancy maple stock with sliding wood patchbox We offer these fine Lebanon Township, Lancaster County style parts, modeled after the work of John Philip Beck. Lebanon township is located just to the north of Lancas

Tulle fusil-de-chasse, pre-shaped stock, pre-inlet 42" octagon-to-round barrel, Fusil lock Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer

Stock, Tulle fusil-de-chasse, pre-shaped, 42" barrel, inlet Fusil lock, plain maple Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer       STK-CHASE-2-M1 . . . $279.00

Stock, Tulle fusil-de-chasse, pre-shaped, 42" barrel, inlet Fusil lock, fancy maple Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer       STK-CHASE-2-M3 . . . $320.00

Stock, Tulle fusil-de-chasse, pre-shaped, 42" barrel, inlet Fusil lock, plain walnut Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer       STK-CHASE-2-W1 . . . $390.00

Jim Bridger Hawken halfstock , pre shaped stock, pre-inlet, 1-1/8" straight or tapered octagon barrel, Jim Bridger lock Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8” straight or 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our

stock, Jim Bridger Hawken , pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, plain maple Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our wax cast Jim Bridg       STK-JB-17-M1 . . . $235.00

stock, Jim Bridger Hawken , pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, fancy maple Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our wax cast Jim Bridg       STK-JB-17-M3 . . . $290.00

stock, Jim Bridger Hawken , pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, extra fancy maple Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our wax cast Jim Bridg       STK-JB-17-M4 . . . $350.00

Stock, J.P. Beck, Lebanon , pre-inlet, "B" or "C" profile 44" swamped barrel, sliding wood patchbox, large Siler lock Precision machine inlet, on Allen’s patented 5 axis pantograph. Our J.P. Beck ‘AH-B’ or 'AH-C' stock is precision inlet for our American Heritage ‘B’ or 'C' profile swamped barrel in 44” length, B profile available in .40, .45 or .50 caliber, C profile available in .50, or .54 caliber, and our large Siler lock. Each stock is precision inlet for the

has been added to your .

---