Brass Bar Stock Solid brass bar stock, ideal for making knife hilts, pommels, guards, spacers, inlays, buttplates, or any other project that needs a heavier hunk of brass. Bar stock is available in a variety of thicknesses and widths to suit almost any need.

Brass bar stock, 1/2" thick, 1-1/4 x 4" long Solid brass bar stock, ideal for making knife hilts, pommels, guards, spacers, inlays, buttplates, or any other project that needs a heavier hunk of brass.       BAR-B-1/2 . . . $11.59

Brass bar stock, 1/4" thick, 3/4 x 4" long Solid brass bar stock, ideal for making knife hilts, pommels, guards, spacers, inlays, buttplates, or any other project that needs a heavier hunk of brass.       BAR-B-1/4 . . . $5.99

Brass bar stock, 1/8" thick, 1 x 6" long Solid brass bar stock, ideal for making knife hilts, pommels, guards, spacers, inlays, buttplates, or any other project that needs a heavier hunk of brass.       BAR-B-1/8 . . . $6.59

Brass Muzzle Loading Gunner's Bore Gauge Track's bore gauge is a rugged solid brass tool, engraved on one side from .015 to .80 caliber, with all popular calibers accurately marked for easy inspection. A blank area is suitable for engraving. The reverse side is marked with popular shotgun bore sizes, from .410 to 10 gauge along one edge. The other edge is calibrated in metric bore sizes,       BORE-GAUGE . . . $3.89

Early Plains Rifle Buttplate , sand cast brass Overall length is 5-1/4", width 1-3/8", comb 3-7/16" An early Plains rifle buttplate, for a fullstock or halfstock percussion rifle with a large butt. Such a rifle would often have a brass or silver patchbox or capbox. Available in sand cast brass or nickel silver. Overall length is 5-1/4", width 1-3/8", comb 3-7/16".       BP-E-4-B . . . $20.99

Plains Rifle Buttplate , sand cast brass Overall length is 4-1/2", width 1-1/4", comb 2-1/2" A meduim size buttplate for a halfstock percussion Plains rifle, such as those made by H. E. Dimick of St. Louis, or by Wurflein of Philadelphia. Consider adding a small brass or silver capbox with round or oval lid. Available in sand cast brass or nickel silver. Overall length is 4-1/2", width 1-1/4", comb 2-1/2".       BP-E-6-B . . . $20.99

French Type D Buttplate , wax cast brass Overall length 4-7/8", width 1-15/16", comb 5" This early buttplate is from the second type of trade gun bartered by the French during the fur trade era, offered until the French were defeated by the British and ejected from Canada in 1763. Now known as the Type 'D' fusil, this general type had many variations, as did French military models during this century. One identifying feature is the Fr       BP-FUSIL-D-B . . . $49.99

Northwest Trade Gun Buttplate , brass Overall length 4-5/8", width 1-15/16", comb 2-1/8" Flat brass buttplate, for the North West Trade Musket, copied exactly from an original gun marked Barnett - 1816 . About 2" width, this is the early style North West Trade Gun buttplate. File the sides to match the narrower 1-1/2" wide buttplates of later period North West trade guns. Mount with square nails for early reproductions, and screws for       BP-NW-1-B . . . $29.99

Small Primitive Button , 3/4" diameter, brass Our small brass buttons are nearly 3/4" inch diameter. Formed from .030" thick brass, these buttons have a concave center surrounded by a flat rim, and have 4 holes for sturdy thread.       BUTTON-4-SB . . . $0.89

Large Regimental Coat Buttons , 1" diameter, brass Our large military regimental coat button is a full 1" diameter. Cut from heavy .050" thick brass, these are finished bright. You may buff these to a brilliant shine, by hand or with a buffing wheel. Convex (domed) with a brass loop soldered inside. Best quality, made in the U.S.A.       BUTTON-R-LB . . . $2.19

Medium Regimental Coat Buttons , 7/8" diameter, brass Our medium size regimental button is a full 7/8" diameter, made in the U.S.A. of brass, about .050” thick. Convex (domed shaped) with a brass loop soldered inside. Clip your pick and pan brush to a regimental coat button on your coat, frock, or add one to your possible’s bag strap.       BUTTON-R-MB . . . $2.19

Tiny Regimental Coat Buttons , 5/8" diameter, brass Military Regiments of many nations used polished metal buttons. Brass, 5/8” diameter, .050” thick, convex (domed) with a brass loop soldered inside. Made in the U.S.A., best quality.       BUTTON-R-TB . . . $2.19

Extra Large Regimental Coat Buttons , 1-1/4" diameter, brass Our largest military regimental coat button is a full 1-1/4" diameter. Cut from heavy .050" thick brass, these are finished bright. You may buff these to a brilliant shine, by hand or with a buffing wheel. Convex (domed) with a brass loop soldered inside. Best quality, made in the U.S.A.       BUTTON-R-XLB . . . $2.39

Cartridge Case , .297 - .230 Morris Long for Rook & Rabbit Rifle, unprimed brass, no headstamp, use small rifle primer, each Cartridge case for .297 - .230 Morris Long, for Rook & Rabbit rifle, new unprimed brass, unmarked, use small rifle primer. Often confused with the similar .297 - .230 Morris Short, or the .297 - .230 Morris Sporting, you can easily trim this case, and full length size it, to fit either of these other variations. Sub-caliber adaptors were popular ac       CASE-297-230-MORRIS-LONG . . . $1.99

Cartridge Case , .50-70 Government, unprimed brass, correct head stamp, by Starline , 250 pieces Cartridge Case, .50-70 Government, unprimed brass, correct head stamp, by Starline , 250 pieces. Serious reloaders should order at least 220 cartridges, all the same brand and lot, to eliminate the variation between case brands. We often shoot 100 or more shots per day, and up to 200 shots or more, over a two day weekend event. Track staff member       CASE-50-70-PACK-250 . . . $290.00

Flint Flash Guard, two points of contact, French, fleur-de-lis, brass These brass flash guards, protect the shooter next to you from overspray vented from your flash hole. This flash guard is shaped with a long arm to provide two contact points. Reshape, or alter as needed. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .062" soft brass, it ma       FLASH-GD-2-FR-B . . . $8.99

Flint Flash Guard, two points of contact, British Crown, brass This brass flash guard protects the shooter next to you from overspray vented from your flash hole. This flash guard is shaped with a long arm to provide two contact points. Reshape, or alter as needed. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .062" soft brass, it may       FLASH-GD-2-GR-B . . . $8.99

Flint Flash Guard, two points of contact, unmarked, brass These brass flash guards, protect the shooter next to you from overspray vented from your flash hole. This flash guard is shaped with a long arm to provide two contact points. Reshape, or alter as needed. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .062" soft brass, it ma       FLASH-GD-2-UN-B . . . $8.99

Flint Flash Guard, French, fleur-de-lis, brass These brass flash guards, protect the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .062" soft brass, it may be bent with hand tools to fit many different locks. Predrilled to fit under an outside mounted frizz       FLASH-GD-FR-B . . . $7.59

Flint Flash Guard, British Crown, brass This brass flash guard protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .062" soft brass, it may be bent with hand tools to fit many different locks. Predrilled to fit under an outside mounted frizzen       FLASH-GD-GR-B . . . $7.59

Flint Flash Guard, unmarked, brass These brass flash guards, protect the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys shoulder-to-shoulder. .062" soft brass, it may be bent with hand tools to fit many different locks. Predrilled to fit under an outside mounted frizz       FLASH-GD-UN-B . . . $7.59

Front Sight Base , machined from solid brass Almost sculptured, this sight base is machined from solid brass stock, with a 0.375" dovetail about 0.750" wide, and 0.062 deep. Slotted to accept sheet stock .062" thick, order our #SHEET-062-B or #SHEET-062-S and cut your own sight blade. Available in brass, steel, or copper.       FS-BASE-B . . . $4.59

Front Sight , high blade, .062" thick nickel silver, 9mm by 3/32" brass dovetail base for CVA rifles This front sight has a polished nickel silver blade with brass base. The rounded silver blade is .270" tall by 0.062" wide. The machined brass dovetail base is .355" long, .750" wide, and .093" deep for fitting to CVA brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail s       FS-CVA-60-HB . . . $11.59

Front Sight , tall blade, .062" thick nickel silver, 9mm by 3/32" brass dovetail base for CVA rifles This front sight has a polished nickel silver blade with brass base. The rounded silver blade is .390" tall by 0.062" wide. The machined brass dovetail base is .355" long, .750" wide, and .093" deep for fitting to CVA brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail s       FS-CVA-60-TB . . . $11.59

has been added to your .

---