Triggerguard, Early Lancaster County , sand cast brass This classic style, is a copy of an early Lancaster County triggerguard. Large enough to accommodate double set triggers. Brass was most commonly used, but longrifles trimmed in nickel silver, or with mixed brass and nickel silver trim are known. Overall length is 10-9/16", inside trigger bow is 3" long, and 1-1/8" deep.       TG-K-1-B . . . $20.99

Triggerguard, Bethlehem or Lehigh County , sand cast brass A sand cast brass copy of an original Bethlehem or Lehigh County style guard. This style was used by gunmakers of the Albright family. Very malleable, we recommend that you anneal our brass castings if you must bend them. Straightening can be done cold, without annealing. Overall length is 8-5/16", inside trigger bow is 2" long, and 7/8" deep.       TG-MA-61-B . . . $20.99

Carlos Gove pattern pipe tomahawk , brass head, 22" tapered and drilled curly maple handle, made in the U.S.A. A replica of a Carlos Gove pipe tomahawk, from his early days in Council Bluffs, he later became a famous gun maker in Denver. Similar designs were also commonly imported in the 18th and early 19th centuries from Europe, and widely imitated by American blacksmiths. The investment cast head is real yellow brass, not cheap aluminum bronze. The pipe       TOMAHAWK-GOVE-B-M-D . . . $88.00

Gunsmith's Brass Hammer , 4 ounce head, 12" hickory handle made in the USA Our Gunsmith's brass hammer has a 4 ounce brass head, about 3/4" diameter, 2-3/16" long, fitted with a 12" hickory handle. Useful for drifting wedge keys and barrel pins, ideal for fitting dovetail sights and lugs..       TOOL-BH-4 . . . $19.99

Drift Punch , knurled brass, for wedge keys and sights. Our knurled brass drift punch was made to allow installing and adjusting dovetail sights, and removing wedge keys from rifles, shotguns, and percussion revolvers, without marking the part. The brass drift is 2-1/2" in overall length, 3/8" in diameter. The blade area is .083" thick and 3/8" wide.       TOOL-KEY-B . . . $5.29

Trigger plate , wax cast brass, for U. S. Model 1803 Harper's Ferry This wax cast brass trigger plate is copied directly from the trigger plate used on rifles made from 1803 to 1806. A slotted brass wear plate, the trigger is not suspended from the trigger plate, but is pinned directly to the wood.       TR-1803-P . . . $12.99

U.S. 1814 Common Rifle ramrod, 33", brass tip U.S. 1814 Common Rifle ramrod, 33", brass tip       516-RRA . . . $49.95 Closeout

Beaded Knife Sheath , 11" long by 4" wide, rawhide & brain tanned leather, brass thimbles This beautifully beaded knife sheath is made from rawhide. The front is covered in brain tan deer skin and is fully beaded with a geometric pattern in glass seed beads. Three beaded leather laces hang from the bottom of the sheath and are decorated with brass thimbles. The sheath measures 11" long by 4" wide. No belt loop is sewn onto this sheath,       AAV-223 . . . $187.50 Closeout

Buffalo Powder Horn , 15" with turned tip, brass tacks, powder measure, hand made, by Scott & Cathy Sibley This beautiful hand made Buffalo powder horn measures 15" long, as measured around the outer curve from the tip to the base. The neck is made of turned horn. A hand carved wooden stopper is fitted. The body of the buffalo horn is a satin black in color. Buffalo horn differs from cow horn and the smooth hand scraped finish displays some of the natur       AAV-965 . . . $320.00

Brass Cartridge Case Cleaner Concentrate, 16 oz. liquid, by Birchwood Casey Super concentrate, this one bottle makes over two gallons of reusable cleaning solution. Easily removes re-sizing lubricant, oils, grime and stains from brass cartridge cases. Restores them to original finish. Cleaner is safe non-fuming, non-etching solution that won't weaken cases. Reusable, store solution in glass or plastic container (not metal)       BC-CC-1 . . . $9.49

BOOK: Hand Loading 10 Gauge Brass Shot Shells for Parker Bros. and other antique shotguns , 10 page booklet on hand loading This booklet is a detailed guide to hand loading 10 gauge brass shot shells. Includes information on safety, tools & supplies, types of shot and powder, types of loads, and step-by-step loading instructions. 10 pages, 8-1/2" x 11" format, soft cover, colored photos. By Track of the Wolf, Inc.       BOOK-HL-10-BSS . . . $5.99

Tinder Box , 1790 style, 2" wide by 4" long, polished brass This replica tinder box is a flat oval, with the lid hinged off center. Neatly polished brass, it measures 2" x 4" with about 5/8" depth. Small enough to fit neatly in your pocket or pouch, and is just large enough for our striker, flint and tinder. The lid is rimmed inside, for a moderately snug "snap tight" fit.       BOX-1790-B . . . $35.29

Lancaster Buttplate , in wax cast brass Overall length 5-1/4", width 1-9/16", comb 2-3/8" Pre-Revolutionary War style buttplate, Lebanon or Lancaster County. Available in wax cast brass, or steel. Overall length 5-1/4", width 1-9/16", comb 2-3/8".       BP-1770-B . . . $42.99

Ball puller , steel screw, .32 caliber brass collar, 10-32 thread Blued steel ball pullers with caliber specific brass collar, with 10-32 threads to fit Thompson Center, CVA, Lyman, Traditions, and most Italian or Spanish guns. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-32-10 . . . $3.79

Ball puller , steel screw, .32 caliber brass collar, 8-32 thread Blued steel ball pullers with caliber specific brass collar, with 8-32 threads to fit standard rods. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-32-8 . . . $3.79

Ball puller , steel screw, .36 caliber brass collar, 10-32 thread Blued steel ball pullers with caliber specific brass collar, with 10-32 threads to fit Thompson Center, CVA, Lyman, Traditions, and most Italian or Spanish guns. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-36-10 . . . $3.79

Ball puller , steel screw, .36 caliber brass collar, 8-32 thread Blued steel ball pullers with caliber specific brass collar, with 8-32 threads to fit standard rods. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-36-8 . . . $3.79

Ball puller , steel screw, .40 caliber brass collar, 10-32 thread Blued steel ball pullers with caliber specific brass collar, with 10-32 threads to fit Thompson Center, CVA, Lyman, Traditions, and most Italian or Spanish guns. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-40-10 . . . $3.89

Ball puller , steel screw, .40 caliber brass collar, 8-32 thread Blued steel ball pullers with caliber specific brass collar, with 8-32 threads to fit standard rods. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-40-8 . . . $3.89

Ball puller , steel screw, .45 caliber brass collar, 10-32 thread Blued steel ball pullers with caliber specific brass collar, with 10-32 threads to fit Thompson Center, CVA, Lyman, Traditions, and most Italian or Spanish guns. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-45-10 . . . $3.89

Ball puller , steel screw, .45 caliber brass collar, 8-32 thread Blued steel ball pullers with caliber specific brass collar, with 8-32 threads to fit standard rods. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-45-8 . . . $3.89

Ball puller , steel screw, .50 caliber brass collar, 10-32 thread Blued steel ball pullers with caliber specific brass collar, with 10-32 threads to fit Thompson Center, CVA, Lyman, Traditions, and most Italian or Spanish guns. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-50-10 . . . $3.99

Ball puller , steel screw, .50 caliber brass collar, 8-32 thread Blued steel ball pullers with caliber specific brass collar, with 8-32 threads to fit standard rods. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-50-8 . . . $3.99

Ball puller , steel screw, .54 caliber brass collar, 10-32 thread Blued steel ball pullers with caliber specific brass collar, with 10-32 threads to fit Thompson Center, CVA, Lyman, Traditions, and most Italian or Spanish guns. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-54-10 . . . $3.99

Ball puller , steel screw, .54 caliber brass collar, 8-32 thread Blued steel ball pullers with caliber specific brass collar, with 8-32 threads to fit standard rods. When pulling a stuck ball we recommend alway lubricating the ball and using a high strength ramrod with a secure tip to remove a ball.       BP-54-8 . . . $3.99

has been added to your .

---