The .50 caliber 34" barrel is 1-1/8" straight octagon. The bore is rifled with six lands and square bottom grooves with a slow twist for a tightly patched round ball. The bore is bright and has been well maintained. The barrel is finished to a chocolate brown and is signed P. Sheets 17 in front of the rear sight. The barrel is fitted with a browned iron blade front sight dovetailed 1-1/2" behind the muzzle and a flat top rear sight dovetailed 7" ahead of the breech.
The maple stock displays some curl near the toe and is stained a reddish brown with gloss finish. The stock has only fair shaping, inletting, and finishing, with many small and a few large dings from normal use. The largest dent is along the right hand side of the toe line with a a deep gouge that has lifted some of the wood fiber. The buttstock is fitted with a nickel silver crescent buttplate to engage the shooter's shoulder in 19th century style. A long browned muzzle cap protects the end grain of the stock. The tang of the breech plug mounts with one domed tang bolt that engages the trigger plate below. A small steel pin retains the barrel to the forearm. The toe of the rifle is fitted with a nickel silver toeplate mounted with two steel screws. The nickel silver triggerguard bow has a finger spur, and the rear of the grip rail has a curled spoon. The wooden ramrod is fitted with a brass loading tip threaded to accept 8-32 cleaning and loading accessories. The ramrod passes through a browned iron entry pipe and two ramrod pipes soldered to the barrel's under rib. A large beaver tail cheek is formed on the left side of the buttstock and the single lock bolt passes through a simple washer style nickel silver sideplate.
Sure-fire ignition is provided by a Jim Chambers' Siler percussion caplock. The plate is finished brown, and has a strong mainspring for fast lock time. The drum was left bright and a steel 1/4-28 percussion nipple for No. 11 cap that is screwed into the drum with a nickel silver flash cup around it to direct cap spray away from the breech. The R.E. Davis double lever double set triggers will only fire from the set position. The front trigger does not engage the sear. You may set the triggers before, or after cocking the lock. Adjust the screw between the two triggers, inboard to reduce set trigger release pressure, our outboard to require a stronger pressure. The set trigger can provide a very light release, perhaps an ounce or two, for accurate aimed shooting during pleasant weather.
This halfstock rifle is used, with a well maintained bore that is bright and ready to shoot. This rifle is intended for bench or rest shooting due to the weight and single lever double set triggers. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.