Gunmakers flint lock is a Siler flint lock, with an oversize plate. This lock is assembled and tuned. Working parts are fitted as necessary for best action and minimum friction. The oversize plate can be shaped to to your custom design. Evidence of the lock maker’s skill is obvious in the tight fit of the pan, internal parts, and the smooth action. A fly detent allows set triggers, if desired.
Track’s gunmakers Siler flint locks are tuned to allow the use of our 3/4” standard flint. Offered in right hand only.
We recommend that you order a dozen Flint-#ENG-6 English 3/4" gun flints, too.
This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Click ADD TO CART, for same day shipment.
Track’s gunmakers Siler flint locks are tuned to allow the use of our 3/4” standard flint. Offered in right hand only.
This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Click ADD TO CART, for same day shipment.
LOCK-OS-FK-PL
lock plate, wax cast steel, 5.8" x .1.18", as cast for Silers' Gunmakers lock
LOCK-SL-FK-BR
Bridle, wax cast steel, as cast, use two screws
LOCK-SL-FK-BX
Bridle screw, .51" long, 8-32 thread, use two
LOCK-SL-FK-FGX
Flash Guard Screw & Nut
for large Siler, deluxe Siler, & Golden Age flintlocks,
8-32 thread, inside mounting screw with square nut.
LOCK-SL-FK-FR
Frizzen, wax cast steel, as cast, temper after fitting
LOCK-SL-FK-FS
Frizzen spring, wax cast steel, tempered, use 8-32 screw
LOCK-SL-FK-FSX
Frizzen spring screw, .51" length, 8-32 thread
LOCK-SL-FK-FX
Frizzen screw, .800" length, 8-32 thread
LOCK-SL-FK-MS
Mainspring, wax cast steel, tempered
LOCK-SL-FK-PA
Pan, flint, with bridle arm, wax cast steel, as cast
LOCK-SL-FK-PX
Pan screw, .33" length, .237" head diameter, 8-32 threads
LOCK-SL-FK-SS
Sear spring, die formed steel, tempered, use 8-32 screw
LOCK-SL-FK-SSX
Sear spring screw, .53" length, 8-32 thread
LOCK-SL-FK-SX
Sear screw, .71" length, 8-32 thread
LOCK-SL-FK-TJX
Top jaw screw, 1/4-20 thread, slotted
LOCK-SL-FK-TX
Tumbler screw, .50" head diameter, 8-32 thread
LOCK-SL-FL-CO
Flint cock, 1.45" throw, wax cast steel, tapped 1/4-20
LOCK-SL-FL-FL
Fly detent, tempered, long, wax cast steel, fits right, left, large, or small Siler locks
LOCK-SL-FL-SE
Sear, tempered, integral bearings, use 8-32 screw
LOCK-SL-FL-TJ
Top jaw, .78" x .88" oval, wax cast steel, .25" hole, deburred ready to install
LOCK-SL-FL-TU
Tumbler, tempered 8-32 tapped, cut for fly
Adobe Reader required to view the files below.
page_163.pdf
Last updated: 4/25/2012 (106 KB)