This Gemmer Hawken - Remington Rolling Block conversion is stocked in walnut, and trimmed in iron furniture. This conversion was assemble around an original post 1901 smokeless powder No. 1 Remington Rolling Block late action. The buttstock is fitted with a tall crescent steel buttplate. The triggerguard has the classic Hawken scroll shape. The heavy barrel is fitted with a Beach front sight and a Sharps buckhorn ladder rear sight. The bore is bright and has been well maintained. This conversion rifle weighs 12.0 pounds and has a trigger reach of 13-5/8". We must deliver to a Minnesota resident, or to a licensed dealer in any other state. Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL copy.
This rifle is chambered for the .45-70 Gov't cartridge. The barrel is 1-1/8" straight octagon with an overall length of 28", rust browned to a smooth silvery-brown finish. The barrel is fitted with an under rib and ramrod pipes to accept the 3/8" diameter cleaning rod. The rod has a brass tip with 8-32 threads for cleaning accessories. The top flat is marked 45-70 and the left oblique flat is stamped MK near the breach. A Beach combination front sight is dovetailed 1" behind the muzzle. A small blade is in the down position, and it is flipped up for a covered fine post front sight. A Sharps buckhorn style ladder sight is mounted 7" ahead of the action.
Stocked in black walnut, the stock has a small amount of figure. The stock has an aged patina finish that complements the rest of the rifle. The buttstock is fitted with a tall, crescent steel buttplate. A long Hawken style toeplate helps to protect this delicate area of the stock. The forearm is secured with two wedge keys mounted through oval escutcheons. The forearm is finished with a pewter tip and a browned iron ramrod entry pipe.
This nice single shot rifle has a strong mainspring. The hammer and breech block are finished to a dull gray, and the action is finished to match the barrel. The action has a few marks typical of use. The action is fitted with the typical military style single trigger. The trigger guard is a classic Hawken style scroll shape. The upper tang is marked Remington Arms Co. / Ilion. N.Y. U.S.A. / Patented Octr. 23nd 1901 in three lines.
This Gemmer conversion Remington Rolling Block will be a great addition to your collection. It will be a joy to shoot and is sure to grab the attention of other shooters at the range! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready for same day shipment on receipt of your funds, and your Federal Firearms Licensed dealer's signed FFL
copy. We
must deliver to a Minnesota resident, or to a licensed dealer in any other state.
Search for a FFL Transfer
Dealer in your area.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities,
then click CHECK OUT. Enter your name, address, and billing information for prompt shipment.
Or, PRINT your order after entering your address, attach your check or money order, and send it by mail.
Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and
shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost
for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted.
Postage is your only risk.
J.P. Gemmer Rolling Block Rifle,
caliber .45-70 Gov't, 28" barrel,
walnut, iron trim, beach sight,
aged patina finish, used
|
Availability:
|
|
|
Price:
|
$2,499.00
|
Special Restrictions Apply
Not available for export outside the U.S.A.
Must be delivered to a Federal Firearms Licensed dealer.
A signed copy of your dealer's FFL license is required before shipment.
SPG Black Powder Cartridge Reloading Primer,
revised 9th edition, 20 plus new pages
by Mike Venturino & Steve Garbe
|
Availability:
|
|
|
Price:
|
$34.95
|
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
|
Availability:
|
|
|
Price:
|
$4.59
|
Bore mop, 100% Cotton, for .45 caliber, 10-32 thread, washable
|
Availability:
|
|
|
Price:
|
$3.99
|
Bore brush, bronze, for .45 caliber, 10-32 thread
|
Availability:
|
|
|
Price:
|
$4.29
|
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
each piece, no minimum order
|
Availability:
|
|
|
Price:
|
$0.70
|
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
50 pieces
|
Availability:
|
|
|
Price:
|
$34.00
|
Special Restrictions Apply
Not available for export outside the U.S.A.
Cartridge Case,
.45-70 Government,
unprimed brass,
correct head stamp,
2.1", by Starline,
100 pieces
|
Availability:
|
|
|
Price:
|
$65.00
|
Special Restrictions Apply
Not available for export outside the U.S.A.
Neck Expander Plug,
.457" diameter,
to fit our
Lee 7/8-14 die
|
Availability:
|
|
|
Price:
|
$3.99
|
Neck Expander Plug,
.458" diameter,
to fit our
Lee 7/8-14 die
|
Availability:
|
|
|
Price:
|
$3.99
|
Neck Expander Plug,
.459" diameter,
to fit our
Lee 7/8-14 die
|
Availability:
|
|
|
Price:
|
$3.99
|
Neck Expander Plug,
.460" diameter,
to fit our
Lee 7/8-14 die
|
Availability:
|
|
|
Price:
|
$3.99
|
Neck Expander Plug,
.461" diameter,
to fit our
Lee 7/8-14 die
|
Availability:
|
|
|
Price:
|
$3.99
|
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 8-32 thread
|
Availability:
|
|
|
Price:
|
$4.59
|
Lee Bullet Mold .45-70 caliber, .459" diameter, 405 grain, hollow base U.S. 1873 Government mold, single cavity
|
Availability:
|
|
|
Price:
|
$45.99
|
Lee Bullet Mold .45-70 caliber, .457" diameter, 340 grain, flat nose, solid base BPCR mold, double cavity
|
Availability:
|
|
|
Price:
|
$36.99
|
Lee Bullet Mold .45-70 caliber, .457" diameter, 405 grain, flat nose, solid base BPCR mold, double cavity
|
Availability:
|
|
|
Price:
|
$36.99
|
Lee Bullet Mold .45-70 caliber, .457" diameter, 450 grain, flat nose, solid base BPCR mold, double cavity
|
Availability:
|
|
|
Price:
|
$36.99
|
Lee Bullet Mold .45-70 caliber, .457" diameter, 500 grain, flat nose, solid base BPCR mold, double cavity
|
Availability:
|
|
|
Price:
|
$36.99
|
LEE Classic Cast Reloader Press,
for pistol or rifle cartridges
|
Availability:
|
|
|
Price:
|
$210.99
|
Lee Liquid Alox, 4 oz. bottle
|
Availability:
|
|
|
Price:
|
$7.99
|
Special Restrictions Apply
Not available for export outside the U.S.A.
Only ground shipping to a physical street address in the continental 48 states. Can not be shipped to a P.O. Box.
LEE Loading Dies,
caliber .45-70 Gov't,
including shell holder
|
Availability:
|
|
|
Price:
|
$46.99
|
LEE Neck Expander Die,
7/8-14 thread,
for our neck expander plugs
or powder compression plugs,
each sold separately
|
Availability:
|
|
|
Price:
|
$15.29
|
Handles, for bullet mold, LEE Commercial mold handles for six cavity molds, also fit Lyman, RCBS and similar mold blocks.
|
Availability:
|
|
|
Price:
|
$23.59
|
Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120
|
Availability:
|
|
|
Price:
|
$4.99
|
SPG Bullet Lubricant,
one 1-1/4 ounce stick, for Black or Smokeless Powder
|
Availability:
|
|
|
Price:
|
$5.95
|
Bullet Mold,
.457" diameter, 330 grain hollow point mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 385 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 500 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 535 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 292 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 405 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 400 grain bullet mold,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Bullet Mold,
.457" diameter, 500 grain bullet mold,
Schmittzer pointed bullet,
single cavity steel mold blocks,
by Lyman
|
Availability:
|
|
|
Price:
|
$102.99
|
Case Lube,
2 oz. bottle, by Lyman
|
Availability:
|
|
|
Price:
|
$7.99
|
Case Lube Pad,
by Lyman
|
Availability:
|
|
|
Price:
|
$9.99
|
Lyman Three Die Set,
for .45-70 Government
|
Availability:
|
|
|
Price:
|
$69.99
|
Handles for large mold blocks,
by Lyman,
fits all current single and double cavity molds
|
Availability:
|
|
|
Price:
|
$55.25
|
.457" Sizing & Lube die,
by Lyman
|
Availability:
|
|
|
Price:
|
$40.19
|
.458" Sizing & Lube die,
by Lyman
|
Availability:
|
|
|
Price:
|
$40.19
|
.459" Sizing & Lube die,
by Lyman
|
Availability:
|
|
|
Price:
|
$40.19
|
Shell holder #17,
by Lyman,
fits .40-65 & .45-70 to .45-120
|
Availability:
|
|
|
Price:
|
$10.19
|
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
|
Availability:
|
|
|
Price:
|
$4.49
|