Stocked in walnut, with 15/16" octagon barrel with hooked breech, color hardened percussion lock, and brass triggerguard. This Plains Pistol has the classic 1830 era bag butt architecture. This is a very comfortable grip, large enough for man sized hands, with enough drop and curve to make aiming as instinctive as pointing your finger. This used pistol has some rasp marks on the grip where the wood was reshaped to match the triggerguard. This stock still has excess wood and could be reshaped and finished smooth.
The 15/16" octagon barrel is 8" long and finished with a deep blue color. Rifled with six equal lands and grooves. The barrel has a 1 in 30" twist ideal for pistol shooting a patched round ball.The barrel is fitted with blued steel blade front sight and flat top rear sight. The barrel is marked with the Italian proof marks and PLAINS PISTOL .50. The hooked breech, and single wedge key, allow the barrel and breech plug to be dismounted with only finger pressure. No tools are needed to dismount this barrel for cleaning, but you should use our #NW-160 nipple wrench, sold separately, to remove the new stainless steel nipple, when flushing the barrel.
The grip rail of the brass triggerguard is mounted with two blued steel screws. The screws and the triggerguard have some marks. The forend is fitted with a blued steel forend cap, with integral ramrod hole. A 3/8" diameter ramrod serves this pistol. We highly recommend using a pistol loading rod to service and clean the pistol. Order our pistol loading #PL-6-50 rod with .50 caliber jag and ball starter, which is ideal for use with this pistol. We also make #RAMROD-082-LPP (unbreakable delrin) or #RAMROD-082-LPP-H (hickory) 3/8" ramrod with brass tips threaded 8-32 at front, 10-32 at rear, as a replacement part, sold separately.
Used with some marks this will make a fine companion piece, for your .50 caliber percussion Hawken, Great Plains, or Mountain rifle. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The 15/16" octagon barrel is 8" long and finished with a deep blue color. Rifled with six equal lands and grooves. The barrel has a 1 in 30" twist ideal for pistol shooting a patched round ball.The barrel is fitted with blued steel blade front sight and flat top rear sight. The barrel is marked with the Italian proof marks and PLAINS PISTOL .50. The hooked breech, and single wedge key, allow the barrel and breech plug to be dismounted with only finger pressure. No tools are needed to dismount this barrel for cleaning, but you should use our #NW-160 nipple wrench, sold separately, to remove the new stainless steel nipple, when flushing the barrel.
The grip rail of the brass triggerguard is mounted with two blued steel screws. The screws and the triggerguard have some marks. The forend is fitted with a blued steel forend cap, with integral ramrod hole. A 3/8" diameter ramrod serves this pistol. We highly recommend using a pistol loading rod to service and clean the pistol. Order our pistol loading #PL-6-50 rod with .50 caliber jag and ball starter, which is ideal for use with this pistol. We also make #RAMROD-082-LPP (unbreakable delrin) or #RAMROD-082-LPP-H (hickory) 3/8" ramrod with brass tips threaded 8-32 at front, 10-32 at rear, as a replacement part, sold separately.
Used with some marks this will make a fine companion piece, for your .50 caliber percussion Hawken, Great Plains, or Mountain rifle. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Related Products Shown Below
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Bore mop, 100% Cotton, for .48 to .50 caliber, 10-32 thread, washable
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Powder measure, brass, adjustable 0 to 50 grains, with spout
Nipple Wrench for Rifles, short style, with slotted end
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, wonder-lube
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Pistol loading rod and short starter with .50 caliber cleaning jag,
7/16" diameter hickory rod, 10-32 threads,
12" overall usable length including .50 caliber cleaning jag
Ramrod for Lyman Plains Pistol,
3/8" Delrin nylon, 8-1/4" long.
Brass tips are threaded 8-32 at flared front, and 10-32 at rear.
Made in the U.S.A.
Ramrod for Lyman Plains Pistol,
3/8" stained hickory, 8-1/4" long.
Brass tips are threaded 8-32 at flared front, and 10-32 at rear.
Made in the U.S.A.
Nipple: 6-.75mm metric thread ~Investarm Gemmer, Bridger, Cabela's Hawken & Lyman Great Plains, Deerstalker, Trade Rifle~ No. 11 CCI cap, stainless steel
All sizes are nominal. Please verify with description for more information.
-
Brand of Manufacturer
- Investarm
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
PL-7-50
Pistol loading rod and short starter with .50 caliber cleaning jag,
7/16" diameter hickory rod, 10-32 threads,
12" overall usable length including .50 caliber cleaning jag
RAMROD-082-LPP
Ramrod for Lyman Plains Pistol,
3/8" Delrin nylon, 8-1/4" long.
Brass tips are threaded 8-32 at flared front, and 10-32 at rear.
Made in the U.S.A.
RAMROD-082-LPP-H
Ramrod for Lyman Plains Pistol,
3/8" stained hickory, 8-1/4" long.
Brass tips are threaded 8-32 at flared front, and 10-32 at rear.
Made in the U.S.A.
RLGP-S
Nipple: 6-.75mm metric thread ~Investarm Gemmer, Bridger, Cabela's Hawken & Lyman Great Plains, Deerstalker, Trade Rifle~ No. 11 CCI cap, stainless steel