The Investarm Hawken rifle is very similar is shape to rifles produced by Thompson Center. This factory finished halfstock rifle is stocked in European walnut, with brass furniture, and blued 28" barrel. Weight averages 8.7 pounds, and with a trigger reach of 14-1/8 inches, the rifle is perfectly setup for today's typical to large man size shooter. .
The factory polished blued barrel is .54 caliber, 15/16" octagon, 28" length. The bore is rifled with a 1 in 48" rate of twist and could be used with either a round ball, or Thompson Center Maxi ball. The barrel is fitted with a bead front sight, with painted orange bead, and elevation and windage adjustable rear sight. The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.
The walnut stock has been finished with a satin varnish and the brass furniture is polished bright. All the furniture is mounted with blued steel screws in period fashion. The beaver tail cheek piece is shaped for a right hand shooter.
The color case hardened percussion lock is factory engraved. The breech is fitted with a 6-.75mm threaded nipple. Order our #RLGP-S if you need a spare. Double lever double set triggers are well adjusted, to fire set or unset. When the rear trigger is set (latched), the front trigger has a hair-trigger release. The adjustment screw between the triggers allows even finer or coarser adjustment, as desired. Or, turn the screw fully inboard, to disable the set trigger feature, when hunting in very cold weather.
This is a new, unfired halfstock Hawken Rifle by Investarms of Italy. The .54 caliber rifle has a 1 in 48" rate of twist for a patched round ball or conical. The percussion lock is fitted to double lever double set triggers that fire set, or unset. Stock photo shown. Inspect the item, return it unfired for same day refund if not delighted. You will be pleased with your choice. You pay postage, your only risk.
The factory polished blued barrel is .54 caliber, 15/16" octagon, 28" length. The bore is rifled with a 1 in 48" rate of twist and could be used with either a round ball, or Thompson Center Maxi ball. The barrel is fitted with a bead front sight, with painted orange bead, and elevation and windage adjustable rear sight. The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.
The walnut stock has been finished with a satin varnish and the brass furniture is polished bright. All the furniture is mounted with blued steel screws in period fashion. The beaver tail cheek piece is shaped for a right hand shooter.
The color case hardened percussion lock is factory engraved. The breech is fitted with a 6-.75mm threaded nipple. Order our #RLGP-S if you need a spare. Double lever double set triggers are well adjusted, to fire set or unset. When the rear trigger is set (latched), the front trigger has a hair-trigger release. The adjustment screw between the triggers allows even finer or coarser adjustment, as desired. Or, turn the screw fully inboard, to disable the set trigger feature, when hunting in very cold weather.
This is a new, unfired halfstock Hawken Rifle by Investarms of Italy. The .54 caliber rifle has a 1 in 48" rate of twist for a patched round ball or conical. The percussion lock is fitted to double lever double set triggers that fire set, or unset. Stock photo shown. Inspect the item, return it unfired for same day refund if not delighted. You will be pleased with your choice. You pay postage, your only risk.
Related Products Shown Below
bullets, .54 caliber, T/C Maxi-Ball, 425 grains, per 20
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
Bore brush, bronze, for .54 caliber, 10-32 thread
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
Jag, jagged cleaning tip, brass, .54 caliber, 3/8" rod, 10-32 thread
Powder measure, brass, adjustable 0 to 120 grains, with spout
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken,
3/8" brown Delrin nylon, 28-5/8".
Flared brass tip, threaded 8-32 at front, 10-32 at rear.
Made in the U.S.A.
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken,
3/8" stained hickory, 28-5/8" long.
Flared brass tip threaded 8-32 at front, 10-32 thread at rear.
Made in the U.S.A.
Our Strongest Loading & Cleaning Rod,
5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken,
Creedmoor, rigid handle, 10-32 thread
Nipple: 6-.75mm metric thread ~Investarm Gemmer, Bridger, Cabela's Hawken & Lyman Great Plains, Deerstalker, Trade Rifle~ No. 11 CCI cap, stainless steel
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Patch puller worm, double tine, steel, 10-32 thread, made in the U.S.A.
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
RAMROD-285-TC
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken,
3/8" brown Delrin nylon, 28-5/8".
Flared brass tip, threaded 8-32 at front, 10-32 at rear.
Made in the U.S.A.
RAMROD-285-TC-H
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken,
3/8" stained hickory, 28-5/8" long.
Flared brass tip threaded 8-32 at front, 10-32 thread at rear.
Made in the U.S.A.
RAMROD-C-29-10
Our Strongest Loading & Cleaning Rod,
5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken,
Creedmoor, rigid handle, 10-32 thread
RLGP-S
Nipple: 6-.75mm metric thread ~Investarm Gemmer, Bridger, Cabela's Hawken & Lyman Great Plains, Deerstalker, Trade Rifle~ No. 11 CCI cap, stainless steel