Charles Moore Pistol , .45 caliber, 11" barrel, percussion, walnut, iron trim, set trigger, used, with factory box, by Davide Pedersoli Inspired by original pieces built by Charles Moore of London, this reproduction percussion English dueling pistol was produced by Davide Pedersoli of Italy. Offered in excellent condition the pistol includes the factory carton and paperwork. This pistol is fitted with a single set trigger for target shooting. The single set trigger on these pisto       AAW-309 . . . $849.00

Henry E. Leman ~ Lancaster, Pennsylvania , .54 caliber, 34" Rice barrel, L&R late English flintlock, curly maple, brass, new, by Mike Sullivan Perhaps the most famous of the Lancaster makers, Henry Eicholtz Leman (also spelled Lehman early in his career), created a factory to produce arms for westbound settlers. This flint longrifle has 1830 era Lancaster County style architecture and furniture, and is modeled after Henry Leman's earlier work. This rifle was assembled by contemporary buil       AAW-338 . . .

Lyman Trade Rifle , .54 caliber, 28" barrel, percussion, walnut, brass trim, used, by Investarms Stocked in imported walnut a crack on the side panel has been repaired on this rifle. This .50 caliber percussion rifle has a 15/16" octagon 28" barrel to give it a modest weight. Trimmed in brass furniture with a large bow single trigger. This rifle was factory assembled. The lock is color case hardened in mottled colors. All brass furniture has a       AAW-352 . . . $459.00

T/C Hawken Rifle , .54 caliber, 28" barrel, percussion, walnut stock, brass trim, excellent, by Thompson Center Arms This .54 caliber Thompson Center Hawken percussion rifle is very lightly used. This factory finished rifle is stocked in American black walnut with brass furniture, and blued 28" straight octagon barrel. The bore is bright and has been well maintained. Weight is 8.8 pounds, and with a trigger reach of 14-1/4", the rifle is perfectly setup for today       AAW-442 . . .

H.E. Leman Trade Rifle , .45 caliber, 32-1/2" Colerain barrel, Buckridge flintlock, iron & brass, curly maple, used, by Ted Kramer Many builders in the 1800's made rifles for the fur or Indian trade such as H.E. Leman, E.K. Tryon, and others. This rifle has the classic early 1800's styling found on trade rifles produced in or near Lancaster County, Pennsylvania by H.E. Leman. This well made replica is stocked in curly maple, with an iron buttplate and brass furniture. The Buck       AAW-447 . . . $2,499.00

Double Shotgun , 12 gauge with integral chokes, 28" barrels, percussion, walnut, blued, used, by Davide Pedersoli This nice double percussion shotgun is stocked in walnut and trimmed in blued and color case hardened steel furniture. The front action locks are factory engraved with a floral pattern. The gun was manufactured by Davide Pedersoli of Italy. Weight is 7.4 pounds to help absorb the recoil from the 12 gauge bores. The 13-3/8" and 14-1/4" trigger rea       AAW-478 . . . $1,049.00

T/C Hawken Rifle , .54 caliber, 28" barrel, percussion, walnut stock, brass trim, used, by Thompson Center Arms This .54 caliber Thompson Center Hawken percussion rifle is stocked in American black walnut with brass furniture. The stock, lock, and brass furniture show little use. The 28" straight octagon barrel has a dark gray patina. The bore is bright and has been well maintained. Weight is 8.9 pounds, and with a trigger reach of 14-1/4", the rifle is perf       AAW-518 . . . $549.00

U.S. Model 1803 Harper's Ferry Rifle , .54 caliber, 33" Colerain barrel, flint lock, walnut stock, brass furniture, used, by David Motto One of the most famous American Military arms, the U. S. Model 1803 rifle was produced at Harper's Ferry Arsenal. We offer this lovely replica, hand made by the well known gunmaker, Mr. David Motto . This rifle bears Mr. Motto's military style cartouche mark on the side panel of the stock. This detailed replica was carefully made, and neatly finis       AAW-526 . . . $1,999.00

Leech & Rigdon Confederate Revolver , .36 caliber, 7-1/2" round barrel, percussion, steel frame, beech, used, by High Standard This replica percussion revolver is known as the Leech & Rigdon Confederate revolver. Based on the Colt 1851 Navy revolver, Leech and Rigdon manufactured an estimated 1500 revolvers for the Confederacy with the vast majority manufactured in Greensboro, Georgia. This .36 caliber revolver is assembled with a French gray steel frame, blued cylinder an       AAW-531 . . .

Beretta Over / Under Model 1000 Shotgun , 12 gauge, 30" barrels, percussion, Beretta powder flask, tools, by Pietro Beretta - 1980 Manufactured in 1980 to commemorate the 300th anniversary of Beretta, Gardone, Italy, this nice double percussion shotgun appears to be in as-new condition with the factory box. The white styofoam insert in the factory box is in tough shape and is cracked. This shotgun has most of the original accessories, but we do note that a few were missing fro       AAW-533 . . . $1,099.00

Brass Black Metal Touch-up, 3 oz. liquid, by Birchwood Casey Originally designed for touch-up of brazed joints, as on double shotguns. A great aid to the muzzle loader who wants to darken brass or copper. Diluted it can produce a quick dark surface on brass gun furniture, which looks great when lightly polished with rubbing compound, leaving an "old patina" effect in the corners. Use it to blacken that shiny       BC-BB-2 . . . $8.99

Clear Spirit Level Vial, .220" diameter Build your own spirit level front sight or dovetail insert, using our precision .220" diameter glass vial, with clear liquid and a fast bubble. Overall length is 0.83". Colors can be simulated by applying in or colored foil under the vial.       FS-VIAL-220 . . . $2.99

Antique French Pistol , .55 caliber smoothbore, 8-3/8" octagon-to-round barrel, reconverted flintlock, iron trim, walnut, unsigned This unsigned holster pistol appears to French in style. The pistol is stocked in European walnut and trimmed in steel furniture with bone sideplates. The iron furniture has aged to a dark brown patina. The round faced flintlock has been reconverted to flintlock with a modern cock assembly, pan, and frizzen. The octagon-to-round barrel has a silver       AAV-347 . . . $2,459.00

Rear sight, feather finial for 13/16" or 7/8" octagon barrels, wax cast steel Wax cast steel, not polished, this sight has a long feather finial at front and is patterned from a antique rifle photographed in Rifles of Colonial America by Dr. George Shumway. Does the feather signify the rifle's swift speed? Undercut base is .750" long, .530" wide, dovetail to .050" deep. Height from the bottom of the dovetail to the top of th       RS-G-403-14 . . . $8.99

Rear sight, feather finial for 15/16" or 1" octagon barrels, wax cast steel Wax cast steel, not polished, this sight has a long feather finial at front and is patterned from a antique rifle photographed in Rifles of Colonial America by Dr. George Shumway. Does the feather signify the rifle's swift speed? Undercut base is .750" long, .585" wide, dovetail to .050" deep. Height from the bottom of the dovetail to the top of th       RS-G-403-16 . . . $8.99

Rear sight , Longrifle style, with skirt over dovetail, wax cast steel This rear sight has a concealed dovetail under a front and rear skirt. It will hide a rough looking slot on a 13/16” or 7/8” octagon barrel. The dovetail is about .385” as cast, it will clean up to a standard .375” dovetail. The base is .550” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.39".       RS-DRU-CT . . . $8.99

Soule Rear sight, Vernier 3" Tang Sight, for Pedersoli 1874 Sharps & 1885 Highwall rifles Pedersoli's Soule mid range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.26" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye       RS-DP-SOULE-3 . . . $340.00

Soule Rear sight, Vernier 4" Tang Sight, for Pedersoli 1874 Sharps & 1885 Highwall rifles Pedersoli's Soule long range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.25" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye       RS-DP-SOULE-4 . . . $359.00

Creedmoor Vernier Tang Sight , for Long Range competition, with 5" elevation, and windage adjustment This long-range 5" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 10-28 moun       RS-CREED-5-E . . . $105.99

John Vincent & Son, pre shaped stock, pre-inlet, 13/16", or 7/8" octagon barrel, Goulcher lock Shaped and pre-inlet for a 13/16", or 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ram

Stock, John Vincent & Son, pre-inlet, 13/16" octagon barrel, Goulcher lock, plain maple Shaped and pre-inlet for a 13/16" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole       STK-JVI-13-M1 . . . $240.00

Stock, John Vincent & Son, pre-inlet, 13/16" octagon barrel, Goulcher lock, fancy maple Shaped and pre-inlet for a 13/16" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole       STK-JVI-13-M3 . . . $300.00

Stock, John Vincent & Son, pre-inlet, 13/16" octagon barrel, Goulcher lock, extra fancy maple Shaped and pre-inlet for a 13/16" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole       STK-JVI-13-M4 . . . $360.00

Stock, John Vincent & Son, pre-inlet, 7/8" octagon barrel, Goulcher lock, plain maple Shaped and pre-inlet for a 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole is       STK-JVI-14-M1 . . . $240.00

Stock, John Vincent & Son, pre-inlet 7/8" octagon barrel, Goulcher lock, fancy maple Shaped and pre-inlet for a 7/8" straight octagon barrel, this slim stock is made in the style of John and Caleb Vincent. Pre-inlet for our Goulcher lock, double set triggers, triggerguard, sideplate, buttplate, toeplate, and entry pipe. This stock has 13-1/2" pull, and 3-3/4" drop from the line of sights. Like all Vincent rifles, the ramrod hole is       STK-JVI-14-M3 . . . $300.00

has been added to your .

---