Double Shotgun, 12 gauge with integral chokes, 28" barrels, percussion, walnut, blued, used, by Davide Pedersoli

Home > Guns > Percussion guns > Percussion shotguns

Double Shotgun,
12 gauge with integral chokes, 28" barrels,
percussion, walnut, blued,
used, by Davide Pedersoli

Part Number:	AAW-478
Availability:
Price:	$1,099.00
Order Quantity:

This nice double percussion shotgun is stocked in walnut and trimmed in blued and color case hardened steel furniture. The front action locks are factory engraved with a floral pattern. The gun was manufactured by Davide Pedersoli of Italy. Weight is 7.4 pounds to help absorb the recoil from the 12 gauge bores. The 13-3/8" and 14-1/4" trigger reach should fit today's average shooter quite well. Offered as used this shotgun has a few handling marks on the stock and minor speckles in the blue finish. .

The polished and blued barrels are 28" long. The 12 gauge bore have integral chokes measure .708 and .695" at the muzzle, which would be a integral modified on the right and and full choke on the left. Both bores are mirror bright, indicating it has seen little use and been very well maintained. The front sight is a standard brass bead with a mid bead at the center of the barrel. On barrels with integral chokes your options for loading are wood wads, or traditional cards and wads. For loading traditional card wads through a choke the card manufacturer recommends using a 12 gauge over powder card pushed through the choke sideways, so only two sides of the card are flattened. A smaller 14 gauge fiber wad is used. The thin over shot card can easily pass through a choke without any difficulty.

The straight grip is checkered, and the walnut stock is fitted with a blued steel buttplate. This wide buttplate is nearly flat, making it comfortable with full loads. The long tang is color case hardened, and factory engraved to match the triggerguard, locks, and barrel breeches. The forend is has a single key that retains the barrel. The key allows for quick disassembly for cleaning. Simply withdraw the ramrod, press out the key with firm thumb pressure, and lift the muzzle end, to dismount the barrels for easy cleaning. The ramrod is fitted with a brass shotgun style loading tip on one end and a brass tip with 10-32 threads for loading and cleaning accessories on the opposite end. No cheekpiece is carved, making this shotgun equally handy for right or left hand shooters. The wedge key is slotted and fitted with a capture pin, which prevents it from becoming lost in the field, exactly like better original guns.

Remove the two standard 1/4-28 nipples, using our #NW-120 nipple wrench, and immerse the breech end in a bucket of hot soapy water. Place a wet cleaning patch on our #Ramrod-7-10-B cleaning rod, fitted with our #Jag-12-10 cleaning jag tip. Push the air out, and draw the water in, as you pump the ramrod the full length of each barrel, a few times. Change the water, and the patch. When the patch comes out clean, you are ready to wipe the bores dry, using a patch wetted with water displacing oil.

The Pedersoli shotgun locks are case colored and engraved with a floral pattern. Both locks are perfect inside, with strong springs, secure half-cock notches, and full cock notches that release smoothly with normal trigger finger pressure. Davide Pedersoli double shotguns use our standard 1/4-28 nipple. Apply a tiny amount of Birchwood Casey's Choke Tube Lube, or any good anti-seize grease, to the nipple threads before installation.

A great used double barrel shotgun! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Bore mop, 100% Cotton, for .75 caliber, 10-32 thread, washable

Part Number:	BORE-MOP-75-10
Availability:
Price:	$5.59
Order Quantity:

Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center

Part Number:	FLUSH-RST
Availability:
Price:	$4.99
Order Quantity:

Button jagged cleaning tip, 16 gauge, brass, 10-32 thread

Part Number:	JAG-16-10
Availability:
Price:	$4.29
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59

12 gauge shotgun Premium Lubed Wad, bag of 100 lubricated felt wads

Part Number:	OX-WAD-12-W
Availability:
Price:	$14.99
Order Quantity:

Ramrod, 7/16" hickory, 48" long, brass tip, 10-32 thread

Part Number:	RAMROD-7-10-B
Availability:
Price:	$19.99
Order Quantity:

Ramrod for 13 gauge Double Percussion Shotgun by Davide Pedersoli, 9mm stained hickory, 28-1/8" long. Brass tips, with tempered steel ball puller hidden under the end cap.

Part Number:	RAMROD-281-DP-13-H
Availability:
Price:	$32.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	RST-I
Availability:
Price:	$4.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds

Part Number:	SHOT-4
Availability:
Price:	$42.99
Order Quantity:

12 gauge, .740" ideal for .729" bore, .125" over powder card, 1000, by Circle Fly Wads

Part Number:	WAD-12-A
Availability:
Price:	$12.69
Order Quantity:

12 gauge, .740" ideal for .729" bore, .025" over shot card, 1000, by Circle Fly Wads

Part Number:	WAD-12-B
Availability:
Price:	$12.69
Order Quantity:

14 gauge, .703" ideal for .693" bore, .500" thick fibre wad, 500, by Circle Fly Wads

Part Number:	WAD-14-C
Availability:
Price:	$12.69
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Percussion guns > Percussion shotguns