Trigger, Tulle fusil-de-chasse , wax cast steel, a copy of our original, by Track of the Wolf, Inc. This is a French style trigger plate, a correct copy of the original in our Tulle fusil-de-chasse . It is a very simple attractive design, suitable for use on pistols, longrifles, and fowling guns that require a single trigger. The trigger is about .095" wide, and must be lightly polished before installation. This trigger is designed to be mounte       TR-TULLE-2-T . . . $8.59

Tru-Spark , Carbonitriding Surface Hardening Compound, with Track's detailed instructions for best frizzen sparking, safe, easy to use in a home workshop, non-toxic, 4 oz., made in the USA Tru-Spark Case Hardening Compound This unique product requires only two or three minutes at high temperature to achieve a good wearing surface with fine grain structure, ideal for hardening frizzens to spark well. You will need a Oxygen Acetylene torch for hardening a frizzen. Small steel parts may be hardened using a Propane torch. Medium size       TRU-SPARK-4 . . . $21.99

Trigger Plate only , for our Isaac Haines, Lancaster County stock, wax cast steel Trigger plate only, as cast. Plate tapers from .475" at widest point to .300" at rear, narrowing at front. This trigger plate is pre-inlet into our special fancy fully pre-shaped Isaac Haines style Lancaster County stock. Made in the USA.       TR-YORK-P . . . $12.99

Trigger only , as cast, wax cast steel Curled trigger is about .330" wide, with scroll back. Sold as-cast. Made in the USA.       TR-YORK-T . . . $7.99

Trigger & Trigger Plate , for our Isaac Haines, Lancaster County stock, wax cast steel Trigger and plate, assembled from steel wax castings. Plate tapers from .475" at widest point to .300" at rear, narrowing at front. Curled trigger is about .330" wide, with scroll back. Not very high, this trigger allows for a very thin wrist, and is pre-inlet into our special fancy fully pre-shaped Isaac Haines style Lancaster County stock. Made i       TR-YORK-TP . . . $30.50

Turn Screws , set of 3 screwdrivers, rosewood handles This set of screwdrivers have 3-5/8" long rosewood handles, brass caps, and come in 3/8", 1/4", and 3/16" wide heads.       TURN-SCREW-SET-A . . . $45.99

Turn Screws , set of 3 screwdrivers, horn handles This set of screwdrivers have 3-5/8" long horn handles, brass caps, and come in 3/8", 1/4", and 3/16" wide heads.       TURN-SCREW-SET-AH . . . $45.99

Underhammer nipple, 1/4-28 thread, 5/16" long, for #11 CCI cap, stainless steel Cone length: 0.438" Thread journal length: 0.312" Overall length: 0.750" Diameter of base: 0.307"       UHC-5S . . . $8.99

Underhammer nipple, 1/4-28 thread, 3/8" long, for #11 CCI cap, stainless steel Cone length: 0.440" Thread journal length: 0.375" Overall length: 0.815" Diameter of base: 0.307"       UHC-6S . . . $8.99

Underhammer nipple, 1/4-28 thread, 7/16" long, for #11 CCI cap, stainless steel Cone length: 0.442" Thread journal length: 0.438" Overall length: 0.880" Diameter of base: 0.307"       UHC-7S . . . $8.99

Underhammer nipple, 1/4-32 thread, 5/16" long, for #11 CCI cap, stainless steel Cone length: 0.438" Thread journal length: 0.312" Overall length: 0.750" Diameter of base: 0.307"       UHF-5S . . . $8.99

Underhammer nipple, 1/4-32 thread, 3/8" long, for #11 CCI cap, stainless steel Cone length: 0.440" Thread journal length: 0.375" Overall length: 0.815" Diameter of base: 0.307"       UHF-6S . . . $8.99

Underhammer nipple, 1/4-32 thread, 7/16" long, for #11 CCI cap, stainless steel Cone length: 0.442" Thread journal length: 0.438" Overall length: 0.880" Diameter of base: 0.307"       UHF-7S . . . $8.99

Underlug Staples, for thick keys, thin keys, or barrel pins Underlug staples are authentic, stronger, easier to install, and they remove less metal than dovetail lugs. Not suitable for thin wall barrels. Staples work well for keys, pins, or for supporting a sling swivel. Drill holes about .120" diameter (#31 or 1/8") for these staples. Our UL-104-A staples are made for keys up to .125" thick. The .430" slot       UL-104-A . . . $3.49

Underlug Staples, for thin keys, or barrel pins Underlug staples are authentic,stronger, easier to install, and they remove less metal than dovetail lugs. Not suitable for thin walled barrels. Staples work well for keys, pins, or supporting a sling swivel. Our UL-104-B staples are made for thin keys, up to about .090" thick. The .425" slot width allows expansion of the barrel when hot, to avoid       UL-104-B . . . $3.49

Underlug Staple, solid for barrel pins Underlug staples are authentic,stronger, easier to install, and they remove less metal than dovetail lugs. Not suitable for thin walled barrels. Staples work well for keys, pins, or supporting a sling swivel. Our UL-104-C staples are solid, for use with barrel pins, or to support swivel screws up to about .150" diameter. The bottom of this solid st       UL-104-C . . . $3.49

Underlug , for key, milled steel, .750" dovetail Our UL-36 lug is milled steel, for standard sized keys. Popularly used on Hawken and similar Plains rifles, the slot measures .5" x .12". It fits our favorite KEY-36-B or I as cast. Some gentle peening can compress it, to hold thinner keys snugly. The dovetail is about .75" long by .5" wide. Mount it to the bottom of the barrel in a 0.050" deep dov       UL-36 . . . $6.69

Underlug, for pin or swivel, milled steel, .500" dovetail Our new UL-DH-1 lug is tall and may be cut down, ideal for supporting a sling swivel, barrel pin, or slot it for a tiny wedge key. Milled steel, the dovetail is 0.500" long, by 0.46" wide. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.285" above the base. Most rifles will use three underlugs, while bar       UL-DH-1 . . . $2.69

Underlug for pin, milled steel, .500" dovetail Our UL-NW-1 is a good choice for most longrifles using barrel pins. Milled steel, the dovetail is 0.500" long, by 0.46" wide. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. Most rifles will use three underlugs, while barrels longer than 42" use four. Made in the U.S.A.       UL-NW-1 . . . $2.69

Underlug for pin, milled brass, .500" dovetail Our UL-NW-1-B is a good choice for most longrifles using barrel pins. Milled brass, the dovetail is 0.500" long, by 0.47" wide. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. Most rifles will use three underlugs, while barrels longer than 42" use four. Made in the U.S.A. This underlu       UL-NW-1-B . . . $3.09

Underlug for key, milled steel, .600" dovetail, slotted for key Our UL-NW-2 lug is slotted for a tiny key. The slot measures only about .250" x .087". Enlarge this slot with a file, as necessary. Ideal for use with our 3/32" pin, the long slot allows the barrel expansion when hot. Milled steel, the flat base is about .500" wide, and the dovetail is .600" long. Use it on fullstock rifles.       UL-NW-2 . . . $2.99

Underlug for key, milled steel, .750" dovetail, slotted for key Our UL-NW-3 is sloted for our No. 58 key. Milled steel, the flat base is .465" wide, by .750" long, with a large surface for a good solder joint, if desired. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. The slot is 0.93" tall by 0.42" long (square the slot to use the full width). M       UL-NW-3 . . . $3.29

Underlug for pin, milled steel, .750" dovetail Our UL-NW-4 is a bit longer, to fill old dovetails, or to slot for your key. Milled steel, the flat base is .465" wide, by .750" long, with a large surface for a good solder joint, if desired. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. Most rifles will use three underlugs, while       UL-NW-4 . . . $2.99

Underlug for pin, milled steel, concave, solder to round barrel Our UL-NW-S1 lug is our small solid lug, intended for use with our 3/32" pin. The concave base may be soldered to your round barrel. Milled steel, the base is about ..500" long by 0.460" wide. The blade stands .21" above the base. Recommended for the Tulle fusil de chasse and the English fowler. Made in the U.S.A.       UL-NW-S1 . . . $2.89

Underlug for pin, milled steel, concave, solder to round barrel Our UL-NW-S2 is a bit longer, for use where a larger stronger joint is required. We recommend using this lug to support a sling swivel mounted on your musket's forend. Milled steel, the concave base is .500" wide, .740" long. Use 96% tin + 4% silver lead free solder. It melts at low temperature, but is stronger than lead-tin solder.       UL-NW-S2 . . . $3.09

has been added to your .

---