Ramrod pipe, steel , forward with pin lug, French fusil, for 3/8" ramrod       RP-TYPE-C-F-6-I . . . $11.59

John & Caleb Vincent , Ramrod Pipes , octagon for halfstock rifles, for 5/16 rod, brass only Shown in side view, and top view, these John & Caleb Vincent ramrod pipes are octagon with rings at each end, only available for 5/16" ramrod, in brass only, for halfstock rifles. Designed by Tedd Cash, these are ideal for use on John & Caleb Vincent Ohio halfstock longrifles . Our entry pipe (where rod enters the wood) has an integral skirt.

Ramrod pipe, brass , entry pipe with skirt, John Vincent, octagon, for 5/16" ramrod       RP-VINC-E-5-B . . . $12.99

Ramrod pipe, brass , forward pipe, plain for rib, John Vincent, octagon, for 5/16" ramrod       RP-VINC-H-5-B . . . $7.99

Rear sight, U. S. Model 1803 Harper's Ferry Rifle, wax cast steel Copied from a an original U. S. Model 1803 Harper's Ferry Rifle , this rear sight is wax cast steel, not polished. Base is .700" long, .540" wide, dovetail to a depth of .050". Height from the bottom of the dovetail to the top of the sight notch is 0.29".       RS-1803 . . . $8.99

Aperture disk , large, 1/2" diameter, .093" aperture, fits Lyman RS-57-SML or RS-57-GPR sight Aperture disk, large, #2 fits Lyman RS-57-SML or RS-57-GPR sight. Small 1/2" diameter knurled disk is drilled with large .092" aperture for cloudy light conditions. You can easily enlarge this if desired.       RS-57-DISK-2L . . . $9.99

Aperture disk . Small .040" aperature in large 5/8" disk fits RS57SML or RS57GPR. Special 7/32-40 thread . Aperture disk, small, #2 fits Lyman RS-57-SML or RS-57-GPR sight. Large 5/8" diameter knurled disk is drilled with small .040" aperture for bright light conditions. You can easily enlarge this if desired.       RS-57-DISK-2S . . . $9.99

Peep Rear Sight, adjustable, to fit Lyman Great Plains rifle Blued, with two eye disks, adapter plate allows easily installation on Lyman Great Plains rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. The larger 5/8" diameter knurled eye disk is drilled with the smaller .040" aperture for use on bright days. The smaller 1/2"       RS-57-GPR . . . $122.99

Peep Rear Sight, adjustable, to fit Thompson Center, Lyman Deerstalker, Lyman Trade Rifle, and similar Hawken rifles This blued sight, with two eye disks, is easily installed on Thompson Center, Lyman Deerstalker, Lyman Trade Rifle, and similar Hawken rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Small 5/8" diameter knurled disk is drilled .040". Large 1/2" diameter knurled d       RS-57-SML . . . $122.99

Lyman 66 Receiver Peep Sight , fits Winchester 1894 pre-angle eject Black aluminum, with two eye disks, easily installed on a Winchester 1894 pre-angle eject rifle (94AE). Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Large 5/8" diameter knurled disk is drilled .040". Small 1/2" diameter knurled disk is drilled with a .092" aperture fo       RS-66-A . . . $122.99

Lyman 66 Receiver Peep Sight , fits Marlin 336, 1894, and 1895 Black aluminum, with two eye disks, easily installed on a Marlin 336, 1894, and 1895 rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Large 5/8" diameter knurled disk is drilled .040". Small 1/2" diameter knurled disk is drilled with a .092" aperture for large fie       RS-66-LA . . . $122.99

Lyman 66 Receiver Peep Sight , fits Winchester 1886 and Browning 1886 replicas Black aluminum, with two eye disks, easily installed on a Winchester 1886 and Browning 1886 replicas. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Large 5/8" diameter knurled disk is drilled .040". Small 1/2" diameter knurled disk is drilled with a .092" aperture for       RS-66-WB . . . $122.99

Rear sight, Allentown, Lehigh Valley style, fits up to 7/8" octagon, wax cast steel This Lehigh Valley sight is a excellent choice for a longrifle or pistol. Made in the U.S.A. from wax cast steel. Dovetail up to maximum .062" deep, .500" long, by .525" wide for 7/8" octagon, or file to fit a 13/16" barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.20".       RS-AM-14 . . . $8.99

Rear sight, Allentown, Lehigh Valley style, fits up to 1" octagon, wax cast steel This Lehigh Valley sight is a excellent choice for a longrifle. Made in the U.S.A. from wax cast steel. Dovetail up to a maximum of .062" deep, .500" long, by .575" wide for 1" octagon, or file to fit a 15/16" barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.20".       RS-AM-16 . . . $8.99

Rear sight, Allentown, Lehigh Valley style, fits up to 1-1/8" octagon, wax cast steel This Lehigh Valley sight is a excellent choice for a longrifle. Made in the U.S.A. from wax cast steel. Dovetail up to maximum of .062" deep, .500" long, by .620" wide for 1-1/8" octagon, or file to fit a 1-1/16" barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.20".       RS-AM-18 . . . $8.99

Rear sight, Tiny antique style for 13/16", or 7/8" octagon barrel, wax cast steel Patterned from a tiny original antique rear sight, this very low sight is perfect for use on a Kentucky pistol or slender longrifle. Dovetail to a depth of .050". Wax cast with a .500" dovetail, about .535" wide. Height from the bottom of the dovetail to the top of the sight notch is 0.21".       RS-AT-14 . . . $8.99

Rear Sight Blank , wax cast steel Wax cast steel, this sight blank is made in the U.S.A. The dovetail is .360" long, .560" wide. Height from the bottom of the dovetail to the top of the sight notch is 0.50". The base is a full .100" deep. We do NOT recommend cutting the slot .100" deep in your barrel. Cut a .050" slot depth (not over .062" deep), and allow the base to stand above t       RS-B-1 . . . $8.99

Rear sight, primitive buckhorn, for 13/16" or 7/8" octagon barrel, wax cast steel This primitive buckhorn rear sight has a base .375" long, .530" wide. Dovetail 0.050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.30". Use this primitive buckhorn rear sight on a 13/16 or 7/8" octagon rifle barrel. Wax cast steel. As-cast, not polished, not blued or browned. Remove the casting gate before hand fi       RS-BH-14 . . . $8.99

Rear sight, primitive buckhorn, for 15/16" or 1" octagon barrel, wax cast steel This primitive buckhorn rear sight has a base .435" long, .590" wide. Dovetail 0.050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.30". The base may be file fitted to smaller slots. Use this primitive buckhorn rear sight on a 15/16 or 1" octagon rifle barrel. Wax cast steel. As-cast, not polished, not blued or bro       RS-BH-16 . . . $8.99

Rear Sight, with aperture ring, for 13/16" or 7/8" barrels wax cast steel This fixed rear sight provides a little help for older eyes. This sight base may easily be shortened to fit a more narrow dovetail. Always file the sight, never file the barrel. This sight is designed for use on a longrifle with a 13/16" or 7/8" octagon barrel, or a swamped or tapered barrel of that size. The dovetail is about .750" long, as cast,       RS-CA-PEEP-14 . . . $8.99

Rear Sight, with aperture ring, for 15/16" or 1" barrels wax cast steel This fixed rear sight provides a little help for older eyes. This sight base may easily be shortened to fit a more narrow dovetail. Always file the sight, never file the barrel. This sight is designed for use on a longrifle with a 15/16" or 1" octagon barrel, or a swamped or tapered barrel of that size. The dovetail is about .750" long, as cast, an       RS-CA-PEEP-16 . . . $8.99

Creedmoor Vernier Tang Sight , for Mid Range competition, with 3" elevation, and windage adjustment This mid-range 3" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 4-.7mm moun       RS-CREED-3-E . . . $87.99

Creedmoor Vernier Tang Sight , for Mid Range competition, with 3" elevation and windage, plus true Vertical alignment This mid-range 3" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to sc       RS-CREED-3-WE . . . $105.99

Creedmoor Vernier Tang Sight , for Long Range competition, with 5" elevation, and windage adjustment This long-range 5" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 10-28 moun       RS-CREED-5-E . . . $105.99

Creedmoor Vernier Tang Sight , for Long Range competition, with 5" elevation and windage, plus true Vertical alignment This long-range 5" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to s       RS-CREED-5-WE . . . $105.99

has been added to your .

---