Universal Sling, for Rifle or Fowler , woven webbing with leather ends This sling is perfect for the rifle or fowler with no sling swivels. Easily slip front loop over end of barrel then open cinch loop at other end and slip over butt stock. Cinch loop tight around wrist. Will fit a variety of rifles and fowlers. Made of 2" wide simulated woven cotton with thick leather ends. Measures 41" long. Example rifle shown wit       SLING-UNIV-J . . . $46.50

Snuff box, 2-3/4" round, polished brass, made in the U.S.A. A neatly made round box, of heavy brass, highly polished. The lid fits the base snugly, and is easily removed. About 1" deep, and nearly 2-3/4" diameter. Most brands of modern smokeless tobacco "snuff" (i.e. Copenhagen or Skoal) will fit neatly within this box, but our flint & steel fire striker will not fit. It is a nice large box for carrying an       SNUFF-BOX-B . . . $13.50

Snuff box, 2-3/4" round, polished copper, made in the U.S.A. A neatly made round box, of heavy copper, highly polished. The lid fits the base snugly, and is easily removed. About 1" deep, and nearly 2-3/4" diameter. Most brands of modern smokeless tobacco "snuff" (i.e. Copenhagen or Skoal) will fit neatly within this box, but our flint & steel fire striker will not fit. It is a nice large box for carrying a       SNUFF-BOX-C . . . $20.50

Snuff box, 2-3/4" round, polished nickel silver, made in the U.S.A. A neatly made round box, of heavy nickel silver, highly polished. The lid fits the base snugly, and is easily removed. About 1" deep, and nearly 2-3/4" diameter. Most brands of modern smokeless tobacco "snuff" (i.e. Copenhagen or Skoal) will fit neatly within this box, but our flint & steel fire striker will not fit. It is a nice large box for car       SNUFF-BOX-S . . . $20.50

Solder & Flux , Stay-Brite brand, higher strength, low 430 melting point Solder & Flux , Stay-Brite brand, higher strength, low 430 degree melting point. Includes 1/2 ounce of solder, and flux. StayBright solder is a lead free alloy of tin and silver. Use our Birchwood Casey's Blue Pen, #BC-PSP to mask off solder free borders.       SOLDER-SB . . . $33.00

Silver Bearing Solder Paste , higher strength, low 430 melting point, 7.1 gram syringe Solder ferrous and non-ferrous metals, flows at 430 F, provides strength without the distortion of high temperature brazing. No mess, no waste syringe. Works with heat of a torch or soldering iron. Flux is blended-in. No additinal flux required. Low melting point, flows smoothly at 430 F, remelts at 650 F.       SOLDER-SBP . . . $9.99

Tix brand Anti-Flux, 1/2 ounce bottle Tix brand Anti-Flux, 1/2 ounce bottle.       SOLDER-TAF . . . $13.99

Tix brand Flux, 1/2 ounce bottle Tix flux is non-corrosive, works with soft solder with melting temperatures under 450°. Be sure to order flux and anti-flux, each sold separately.       SOLDER-TF . . . $7.99

Tix brand Soft Solder, 1/2 ounce wire, melts at 275° F with high bond strength The hardest soft solder. Melts at 275° F (100° below lead solder) has a very high bond strength. No cadmium or bismuth, never tarnishes. Tix flux is non-corrosive, works with soft solder with melting temperatures under 450°. Be sure to order flux and anti-flux, each sold separately.       SOLDER-TS . . . $21.99

Pouring Spout , standard 10-1mm thread, fits HVM powder valve, to fill powder measure, solid brass, made in the USA. Flask Spout nozzle, to dispense black powder from a valve or flask, into a powder measure. 10-1mm standard thread fits #HVM valve and replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-300.       SP-000 . . . $3.99

Flask Spout, 15 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 15 grains of FFFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-015.       SP-015 . . . $4.79

Flask Spout, 20 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 20 grains of FFFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-020.       SP-020 . . . $4.79

Flask Spout, 25 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 25 grains of FFFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-025.       SP-025 . . . $4.79

Flask Spout, 30 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 30 grains of FFFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-030.       SP-030 . . . $4.79

Flask Spout, 35 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 35 grains of FFFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-035.       SP-035 . . . $4.79

Flask Spout, 40 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 40 grains of FFFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-040.       SP-040 . . . $4.79

Flask Spout, 50 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 50 grains of FFFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-050.       SP-050 . . . $4.79

Flask Spout, 60 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 60 grains of FFFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-060.       SP-060 . . . $4.79

Flask Spout, 75 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 75 grains of FFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-075.       SP-075 . . . $5.19

Flask Spout, 90 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 90 grains of FFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-090.       SP-090 . . . $5.19

Flask Spout, 100 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 100 grains of FFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-100.       SP-100 . . . $5.29

Flask Spout, 110 grains , 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A. Flask Spout, to measure 110 grains of FFg, with 10-1mm standard thread, fits replica flasks from Italy, solid brass, made in the U.S.A. Replaces TRESO 11-04-110.       SP-110 . . . $5.29

Sideplate for a U. S. Model 1803 Harper's Ferry Rifle , brass This brass sideplate is copied directly from the sideplate used on original 1803 and 1814 rifles. The sideplate includes a subtle error. The position of the front hole is not perfectly located, requiring installation of the front screw at a slight angle. Clearing the ramrod hole is essential, and the screw must be located slightly high. You may tou       SP-1803-B . . . $7.99

Sideplate for a Late 18th Century Pennsylvania longrifle , brass This classic "Arrowhead" ended sideplate was common to rifles made in the Allentown Bethlehem region of Pennsylvania in the late 18th and early 19th centuries. Available in wax cast brass only. Overall length 4-13/16", height 3/4", thickness 0.120".       SP-AB-1-B . . . $22.50

Sideplate for a J. P. Beck, Lebanon longrifle , wax cast brass This sideplate from the Lebanon school of style. Lebanon township, Lancaster County, Pennsylvania was the home of J. P. Beck. This is a copy of his work. Overall length 5-1/8", height 7/8", thickness 0.120". We offer a matching wax cast brass J. P. Beck buttplate, and triggerguard. See Thoughts on the Kentucky Rifle in its Golden Age for examples o       SP-BECK-2-B . . . $21.59

has been added to your .

---