Flint Priming Valve , dispenses 3 grain weight, 10-1mm thread fits large flasks, brass A screw in priming valve for a Colt size flask with 10-1mm threads. The valve is used by removing the flask valve spring, locking the flask open and threading the priming valve into the spout hole. Use FFFFg black powder, for priming only. Best quality, made in the USA, this tiny valve dispenses three grains weight of priming powder, each time the       SP-PV-3 . . . $11.99

Sideplate for Herman Rupp Lehigh Valley Longrifle, wax cast brass This Lehigh Valley sideplate has a arrow head pointed tail with molding and cast in grooves. Patterned from a sideplate on a Herman Rupp longrifle, it would be ideal for other makers of the Allentown-Bethlehem region. Lock bolt are as cast for 8-32 lock bolts with 3/8" diameter heads, enlarge the clearance hole with a 13/64" drill bit to accept 10-       SP-RUPP-2-B . . . $21.59

Sideplate for Herman Rupp Lehigh Valley Longrifle, wax cast steel This Lehigh Valley sideplate has a arrow head pointed tail with molding and cast in grooves. Patterned from a sideplate on a Herman Rupp longrifle, it would be ideal for other makers of the Allentown-Bethlehem region. Lock bolt are as cast for 8-32 lock bolts with 3/8" diameter heads, enlarge the clearance hole with a 13/64" drill bit to accept 10-       SP-RUPP-2-I . . . $17.59

Sideplate for your Classic Longrifles , brass Similar to the Lancaster sideplates with a pointed tail, this sideplate is typical of those by Herman Rupp and other makers of the Allentown-Bethlehem region. For L&R Dickert or Siler's large lock. Easily shortened to fit popular smaller locks. Cut sheet brass, made in the U.S.A.. Overall length 4-11/16", height 1-1/16", thickness 0.080".       SP-RUPP-B . . . $10.99

Sideplate for your C lassic Longrifles , nickel silver Similar to the Lancaster sideplates with a pointed tail, this sideplate is typical of those by Herman Rupp and other makers of the Allentown-Bethlehem region. For L&R Dickert or Siler's large lock. Easily shortened to fit popular smaller locks. Cut sheet nickel silver (aka German silver), made in the U.S.A.. Overall length 4-11/16", height 1-1/16",       SP-RUPP-S . . . $11.99

Spout for Pocket Flask , 8-.75mm thread, brass, throws 25 grains       SPS-025 . . . $4.69

New part number is: SPS-025       SPS-25 . . . $0.00

11 Piece Powder Flask Spout Set , brass, 10-1mm thread to fit most common flasks A 11 piece set of brass flask spouts for measuring Black Powder or Pyrodex by volume. These spouts have 10-1mm threads and fit most commonly encountered powder flasks from Spain or Italy. Sizes include: 15, 20, 25, 30, 35, 40, 50, 60, 75, 90, and 100 grain volume. Each spout will fit the flasks listed below.       SP-SET . . . $53.99

Flint Priming Valve , dispenses 3 grain weight, 8-.75mm thread for pocket flasks, brass A screw in priming valve for a pocket size flask, fits our #FLASK-POCKET and #FLASK-UNUM. The valve is used by removing the flask valve spring, locking the flask open and threading the priming valve into the spout hole. Use FFFFg black powder, for priming only. Best quality, made in the USA, this tiny valve dispenses three grains volume of priming       SPS-PV-3 . . . $11.99

Sideplate, sand cast brass , made in the U.S.A. Sideplate, sand cast brass, made in the U.S.A. Overall length 5-1/2", height 1", thickness 0.125".       SP-SPW-10-B . . . $4.99 Closeout

Sideplate, sand cast nickel , made in the U.S.A. Sideplate, sand cast nickel, made in the U.S.A. Overall length 5-1/2", height 1", thickness 0.125".       SP-SPW-10-S . . . $5.59 Closeout

Sideplate, sand cast brass , made in the U.S.A. Sideplate, sand cast brass, made in the U.S.A. Overall length 5-7/16", height 1-1/16", thickness 0.125".       SP-SPW-11-B . . . $4.99 Closeout

Sideplate, sand cast nickel , made in the U.S.A. Sideplate, sand cast nickel, made in the U.S.A. Overall length 5-7/16", height 1-1/16", thickness 0.125".       SP-SPW-11-S . . . $5.59 Closeout

Sideplate, sand cast nickel , made in the U.S.A. Sideplate, sand cast nickel, made in the U.S.A. Overall length 5-3/8", height 1-1/16", thickness 0.125".       SP-SPW-12-S . . . $5.59 Closeout

Sideplate for your Popular Longrifles , sand cast nickel silver Copied from an original Dauphin County rifle. Right hand only. Overall length 5-5/16", height 1", thickness 0.125".       SP-SPW-13-S . . . $5.59

Sideplate for your Popular Longrifles , new wax cast brass Copied from an original Dauphin County rifle. Right hand only. Now wax cast brass. Overall length 5-1/4", height 1", thickness 0.120".       SP-SPW-2-B . . . $21.59

Sideplate for your Popular Longrifles , new wax cast steel Copied from an original Dauphin County rifle. Right hand only. Now wax cast steel. Overall length 5-1/4", height 1", thickness 0.120".       SP-SPW-2-I . . . $17.59

Sideplate for your Popular Longrifles , sand cast brass Similar to our popular SP-SPW-1, this sideplate has two additional bumps, which were the ends of engraved scrolls. Common on Littlestown and Dauphin County rifles. Right hand use only. Easily shortened. Overall length 5-3/16", height 1", thickness 0.125".       SP-SPW-3-B . . . $4.99

Sideplate for your Popular Longrifles , sand cast nickel silver Similar to our popular SP-SPW-1, this sideplate has two additional bumps, which were the ends of engraved scrolls. Common on Littlestown and Dauphin County rifles. Right hand use only. Easily shortened. Overall length 5-3/16", height 1", thickness 0.125".       SP-SPW-3-S . . . $5.59

Sideplate for your Classic Longrifles , sand cast brass Notice the tiny ball finial at the tail end. This style was used by Zorger, Ernst and other York County rifle makers. For right hand use only. Long enough for large locks, the blank front may be trimmed to your desired length. Overall length 5-5/16", height 1", thickness 0.125".       SP-SPW-4-B . . . $4.99

Sideplate for your Classic Longrifles , sand cast nickel silver Notice the tiny ball finial at the tail end. This style was used by Zorger, Ernst and other York County rifle makers. For right hand use only. Long enough for large locks, the blank front may be trimmed to your desired length. Overall length 5-5/16", height 1", thickness 0.125".       SP-SPW-4-S . . . $5.59

Sideplate for your Popular Longrifles , sand cast nickel silver Copied after the style of Peter Gonter. Long Enough for our Christian's Spring, Twigg, Tryon, 1750, or Jaeger rifle lock. To shorten, round the front end. Right hand use only due to deeply cast-in part number on reverse side. Overall length 5-1/4", height 1-1/16", thickness 0.125".       SP-SPW-5-S . . . $5.59

Sideplate for your Classic Longrifles , sand cast nickel silver Copied from J. Brooks, a Lancaster County maker. Right hand only, for large locks. Overall length 5-1/4", height 1", thickness 0.125".       SP-SPW-6-S . . . $5.59

Sideplate, sand cast brass , made in the U.S.A. Sideplate, sand cast brass, made in the U.S.A. Overall length 5-1/16", height 1-1/16", thickness 0.125".       SP-SPW-7-B . . . $4.99 Closeout

Sideplate, nickel , made in the U.S.A. Sideplate, nickel, made in the U.S.A. Overall length 5-1/16", height 1-1/16", thickness 0.125".       SP-SPW-7-S . . . $5.59 Closeout

has been added to your .

---