Allentown - Bethlehem longrifle Patchbox Kit , steel, 7" overall length This patchbox kit has a neatly formed hinge, and is slightly curved to conform to the shape of your buttstock. Tempered springs and instructions are included. Made of iron, brass is the traditional trim for this longrifle. We recommend mounting the patchbox with our #SCREW-6-1/2 unplated iron wood screws. The early wide lid, acanthus leaf finial, a       PB-RUPP-7-I . . . $25.99

Allentown - Bethlehem longrifle Patchbox Kit , nickel silver, 7" overall length This patchbox kit has a neatly formed hinge, and is slightly curved to conform to the shape of your buttstock. Tempered springs and instructions are included. Made of nickel silver, brass is the traditional trim for this longrifle. We recommend mounting the patchbox with our #SCREW-6-1/2 unplated iron wood screws. The early wide lid, acanthus leaf       PB-RUPP-7-S . . . $29.99

Patchbox spring , .032" tempered steel, 1/4" x 1-9/16" long Inexpensive steel springs to make your patchbox easier to install.       PB-SPRING-L . . . $2.99

Patchbox spring , .014" soft steel, 3/8" x 1-1/6" long Inexpensive steel springs to make your patchbox easier to install. Requires tempering.       PB-SPRING-O . . . $1.00

Patchbox spring , .032" tempered steel, 3/8" x 1-1/2" long Inexpensive steel springs to make your patchbox easier to install.       PB-SPRING-T . . . $1.59

Bucks County A. Verner Patchbox Kit , brass, 7-1/8" overall length A copy of a A. Verner patchbox, as shown in Rifles of Colonial America . We show the matching buttplate in our buttplate section. Instructions included. 7-1/8" overall length.       PB-VERNER-1-B . . . $49.99

patchbox latch spring for U. S. Model 1803 Harper's Ferry Rifle, spring steel Copied from a an original U. S. Model 1803 Harper's Ferry Rifle , this patchbox latch spring is made of tempered steel, ready for installation in a cavity in the end grain of your stock, under your buttplate. Includes mounting screw. This patchbox latch V spring is also commonly used on better quality American longrifles.       PB-VS-1803 . . . $10.95

Nipple , 12-28 thread, for for most A.S.M brand 1860 Colt revolvers, #11 CCI cap, hardened steel Cone length: 0.300" Thread journal length: 0.200" Overall length: 0.500" Diameter of base: 0.307"       PCC-I . . . $4.99

Nipple , 12-28 thread, for most A.S.M brand 1860 Colt revolvers, #11 CCI cap, stainless steel Cone length: 0.300" Thread journal length: 0.200" Overall length: 0.500" Diameter of base: 0.307"       PCC-S . . . $4.99

Pewter, one pound ingot of casting pewter for forend caps, with instructions Original rifles often used "pewter" muzzle caps. Pour your own pewter forend cap, and finish it in place. Our one pound ingot of forend cap alloy will make three or more Hawken forend caps. Each ingot includes melting and pouring instructions and line drawings. If you are you looking for a lead-free pewter for inlays or pipe tomahawks , see our "Br       PEWTER . . . $12.99

Britannia Pewter casting grains, 1/4 lb, lead free Pour your own pewter inlays and decoration bands. Our 1/4 pound bag of casting grains of lead free "Britannia" pewter will decorate many pipe tomahawks. Our lead free casting grains allows the user to melt small amounts much easier than ingots.       PEWTER-CG . . . $8.29

Nipple , 12-24 thread, used in some FIE marked 1849 Colt pocket model revolvers #11 CCI cap, hardened steel Cone length: 0.240" Thread journal length: 0.225" Overall length: 0.465" Diameter of base: 0.275" (this small diameter requires grinding the wrench outside diameter to fit)       PFIE-I . . . $6.99

Pick & Pan Brush , with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler No re-enactor or flint lock shooter should be without a proper pick & brush set. These handy tools are used for clearing the pan and touch hole of your firearm between shots, This "whisk and pick" is modeled after several original examples, and features a 3" hand forged vent pick, with decorative twists and curled head. The 2-1/4" brush has a turne       PICK-BRUSH-H . . . $15.99

Spring steel nipple pick , with bone bead handle Our spring steel wire nipple pick, often referred to as a nipple prick, has an antique bone bead handle with deep red finial beads. Carry one in your possibles bag, to clear your vent or nipple.       PICK-NIPPLE . . . $3.59

Forged steel vent pick , 2-1/2" long, for rifle These primitive vent picks are beautifully temper blued spring steel. Keep one with your priming horn, for sure fire ignition.       PICK-VENT-2 . . . $3.99

Forged steel vent pick , 3-1/2" long, for musket These primitive vent picks are beautifully temper blued spring steel. Keep one with your priming horn, for sure fire ignition.       PICK-VENT-3 . . . $4.29

Solid Brass Pin Stock Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.

Solid Brass Pin Stock , 1/16" diameter, 6" length Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.       PIN-1/16-B . . . $1.29

Solid Brass Cutler Pins, 1/8" diameter, 2" length, pack of 10 Solid brass cutler pins for attaching knife handles, hinges or any other pin application. Pins are 2" long by 1/8" diameter. Pack of 10.       PIN-1/8-B . . . $3.29

Solid Brass Cutler Pins, 1/8" diameter, 2" length, pack of 3 Solid brass cutler pins for attaching knife handles, hinges or any other pin application. Pins are 2" long by 1/8" diameter. Pack of 3.       PIN-1/8-B-3PK . . . $1.29

Steel Dowel Pin , 3/32" diameter, 1-1/4", hardened, for lug, pipe, guard, or trigger pivot pin Our 3/32" steel dowel pins are hardened to Rc 65, ideal for pinning barrel lugs, triggerguards, ramrod pipes, trigger pivot pins, and other parts. Our 3/32" dowel pins are .0937" diameter, 1-1/4" length, with neatly chamfered ends. Old time gunmakers used pins, whenever possible, to avoid making screws. Pins are the correct traditional method. Nail       PIN-3-32 . . . $0.60

Pack of 20 dowel pins 3/32" x 1-1/4", hardened steel for lug, pipe, guard or trigger pivot pin Our 3/32" steel dowel pins are hardened to Rc 65, ideal for pinning barrel lugs, triggerguards, ramrod pipes, trigger pivot pins and other parts. Dowel pins measure .0937" in diameter, 1-1/4" long with neatly chamfered ends. Old time gunmakers used pins whenever possible to avoid making screws. Pins are the correct traditional method. Nail shanks a       PIN-3-32-20PK . . . $12.00

Solid Brass Pin Stock , 3/32" diameter, 6" length Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.       PIN-3/32-B . . . $1.29

Free Trapper, Independent American, badge of allegiance, 1-1/4" diameter While most free trappers were allied to one fur company (through debt) the "free trapper" was a true entrepreneur. He risked his own funds, and sold to the highest bidder. 1-1/4", finished in red on gold.       PIN-FT . . . $9.99

Northwest Company Trade Pin, badge of allegiance 1-5/8" height An authentic reproduction carrying the logo of this famous fur trading company in gold with black lettering and an enamel blue background. Pin back for easy attachment to clothing.       PIN-NW . . . $9.99

has been added to your .

---