Your search for '斗破苍穹章节'
returned
5,642 results.
|
Underlug Staples, for thick keys, thin keys, or barrel pins
Underlug staples are authentic, stronger, easier to install, and they remove less metal than dovetail lugs. Not suitable for thin wall barrels. Staples work well for keys, pins, or for supporting a sling swivel. Drill holes about .120" diameter (#31 or 1/8") for these staples. Our UL-104-A staples are made for keys up to .125" thick. The .430" slot
|
|
Underlug Staples, for thin keys, or barrel pins
Underlug staples are authentic,stronger, easier to install, and they remove less metal than dovetail lugs. Not suitable for thin walled barrels. Staples work well for keys, pins, or supporting a sling swivel. Our UL-104-B staples are made for thin keys, up to about .090" thick. The .425" slot width allows expansion of the barrel when hot, to avoid
|
|
Underlug Staple, solid for barrel pins
Underlug staples are authentic,stronger, easier to install, and they remove less metal than dovetail lugs. Not suitable for thin walled barrels. Staples work well for keys, pins, or supporting a sling swivel. Our UL-104-C staples are solid, for use with barrel pins, or to support swivel screws up to about .150" diameter. The bottom of this solid st
|
|
Underlug , for key, milled steel, .750" dovetail
Our UL-36 lug is milled steel, for standard sized keys. Popularly used on Hawken and similar Plains rifles, the slot measures .5" x .12". It fits our favorite KEY-36-B or I as cast. Some gentle peening can compress it, to hold thinner keys snugly. The dovetail is about .75" long by .5" wide. Mount it to the bottom of the barrel in a 0.050" deep dov
|
|
Underlug, for pin or swivel, milled steel, .500" dovetail
Our new UL-DH-1 lug is tall and may be cut down, ideal for supporting a sling swivel, barrel pin, or slot it for a tiny wedge key. Milled steel, the dovetail is 0.500" long, by 0.46" wide. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.285" above the base. Most rifles will use three underlugs, while bar
|
|
Underlug for pin, milled steel, .500" dovetail
Our UL-NW-1 is a good choice for most longrifles using barrel pins. Milled steel, the dovetail is 0.500" long, by 0.46" wide. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. Most rifles will use three underlugs, while barrels longer than 42" use four. Made in the U.S.A.
|
|
Underlug for pin, milled brass, .500" dovetail
Our UL-NW-1-B is a good choice for most longrifles using barrel pins. Milled brass, the dovetail is 0.500" long, by 0.47" wide. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. Most rifles will use three underlugs, while barrels longer than 42" use four. Made in the U.S.A. This underlu
|
|
Underlug for key, milled steel, .600" dovetail, slotted for key
Our UL-NW-2 lug is slotted for a tiny key. The slot measures only about .250" x .087". Enlarge this slot with a file, as necessary. Ideal for use with our 3/32" pin, the long slot allows the barrel expansion when hot. Milled steel, the flat base is about .500" wide, and the dovetail is .600" long. Use it on fullstock rifles.
|
|
Underlug for key, milled steel, .750" dovetail, slotted for key
Our UL-NW-3 is sloted for our No. 58 key. Milled steel, the flat base is .465" wide, by .750" long, with a large surface for a good solder joint, if desired. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. The slot is 0.93" tall by 0.42" long (square the slot to use the full width). M
|
|
Underlug for pin, milled steel, .750" dovetail
Our UL-NW-4 is a bit longer, to fill old dovetails, or to slot for your key. Milled steel, the flat base is .465" wide, by .750" long, with a large surface for a good solder joint, if desired. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. Most rifles will use three underlugs, while
|
|
Underlug for pin, milled steel, concave, solder to round barrel
Our UL-NW-S1 lug is our small solid lug, intended for use with our 3/32" pin. The concave base may be soldered to your round barrel. Milled steel, the base is about ..500" long by 0.460" wide. The blade stands .21" above the base. Recommended for the Tulle fusil de chasse and the English fowler. Made in the U.S.A.
|
|
Underlug for pin, milled steel, concave, solder to round barrel
Our UL-NW-S2 is a bit longer, for use where a larger stronger joint is required. We recommend using this lug to support a sling swivel mounted on your musket's forend. Milled steel, the concave base is .500" wide, .740" long. Use 96% tin + 4% silver lead free solder. It melts at low temperature, but is stronger than lead-tin solder.
|
|
Underlug for key, milled steel, concave, solder to round barrel
Our UL-NW-S3 is slotted for a standard large key. You may enlarge the .360" x .120" slot to accept our Key-36-I. Be sure to order the matching IN-Slot-2 inlays, which are pre-cut to exactly fit that key. The concave base measures about .500" wide x .740" long. Solder this lug to your round barrel, for use with a key.
|
|
Underlug, folded & formed with dovetail base, slotted for keys
Our UL-TC-2 lug is slotted for a tiny key. The slot measures only about .262" x .087". Enlarge this slot with a file, as necessary. Ideal for use with our 3/32" pin, the long slot allows the barrel expansion when hot. Formed steel, the flat base is about .590" wide, and the dovetail is .476" long. Use it on fullstock rifles.
|
|
Underlug, folded & formed with dovetail base, slotted for keys
Our UL-TC-3 has a .367" x .100" slot for a regular large key. File the slot larger, if necessary. Formed steel, the flat base is about .590" wide, by .722" long, with a large surface for a good solder joint, if you wish to avoid a slot in thin walled barrels.
|
|
Underlug blank , for Thompson Center & similar rifles
Our UL-TC-H underlug blank is made for the T/C Hawken, Renegade, and other similar rifles. We use these to replace lost lugs on the CVA Mountain Rifle, Big Bore, Hawken, Frontier and similar rifles. Strangely, CVA lug slots tend to be loose. This lug has a longer base than the CVA, which allows a perfect fit. When adapting our Green Mountain drop-i
|
|
Underlugs, folded & formed, for round barrels
Our UL-TC-S1 lug is our small formed lug, intended for use with our 3/32" pin. The concave base may be soldered to your round barrel. Formed steel, the base is about .535" wide x .475" long.
|