Your search for '斗破苍穹章节'
returned
5,642 results.
|
Dovetail Forming Chisel wax cast steel, made in the USA
Use our dovetail forming chisel to “persuade" the slot to accept your lug or sight. It raises the metal, rather than removing it. Underlug slots may be half deep, half raised. Or use it to form a raised moulding for your rear sight. Very shallow dovetails in round barrels may be stronger than solder for underlugs. Instruction sheet included. A exam
|
|
Drum drilling tool , alignment jig, for drilling nipple threads
Install a percussion powder drum on your new rifle barrel, and be assured of perfect alignment. Using this drilling jig is very quick and easy. No file fitting is required to index the nipple to correctly engage the hammer. Never use a washer or shim under your powder drum. Install one of our drums and use this tool to locate and install the nipple
|
|
Drift Punch , knurled brass, for wedge keys and sights.
Our knurled brass drift punch was made to allow installing and adjusting dovetail sights, and removing wedge keys from rifles, shotguns, and percussion revolvers, without marking the part. The brass drift is 2-1/2" in overall length, 3/8" in diameter. The blade area is .083" thick and 3/8" wide.
|
|
Timothy Pickering's Tool , for flint muskets, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Large size, this tool is made to fit your Brown Bess musket lock, U. S. Springfield musket lock, and the R. E. Davis North West Trade Gun flint lock. Hand forged, ground to fit the lock screws correctly, and tempered, this tool will give a lifetime of service, exactly like the original. This is a replica of the first U. S. issued gun tool, designed
|
|
Timothy Pickering's Tool , medium size, for flint rifles & fowling guns, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Medium size, this tool is made to fit your Jim Chamber's Fowling Gun lock, large Siler flint lock, L&R Queen Anne, and the R. E. Davis Jaeger and Fowling gun flint locks. Hand forged, ground to fit the lock screws correctly, and tempered, this tool will give a lifetime of service, exactly like the original. This is a replica of the first U. S. issu
|
|
Thomas Pickering's Tool , for flint rifles & pistols, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Small size, this tool is made to fit your Jim Chamber's small Queen Anne pistol lock, small Siler flint lock, smaller L&R Bailes locks, and pistol size flint locks. Hand forged, ground to fit the lock screws correctly, and tempered, this tool will give a lifetime of service, exactly like the original. This is a replica of the first U. S. issued gun
|
|
Oversize Reforming Thread Taps , to repair worn or damaged 1/4-28 threads, set of three
Each set contains the three most commonly used taps: .255-28 (+.005), .260-28 (+.010), .265-28 (+.015), over size 1/4-28 taps. These are thread reforming taps. Use these taps, in sequence, to clean up a 1/4-28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thread a new
|
|
Oversize Reforming Thread Taps , to repair worn or damaged 1/4-28 threads, set of five
Each set contains five taps: .255-28 (+.005), .260-28 (+.010), .265-28 (+.015), .270-28 (+.020), .275-28 (+.025) over size 1/4-28 taps. These are thread reforming taps. Use these taps, in sequence, to clean up a 1/4-28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thre
|
|
Gun Care Screwdriver Set , set of eight, made by Grace, USA
Grace USA's top quality gun care screwdriver set. Comes with eight screwdrivers, each hand assembled and custom hollow-ground to fit scope screws, plug screws, guard screws, floor plate screws, sight screws, and many other gun screws. The square-shanked blades are hardened and tempered to R/C 52-56. The handles are turned from Main hardwood with a
|
|
Mainspring Vise , to safely compress a mainspring
Mainspring Vise Novice gun owners may try to disassemble a fine lock using a Channel Lock® or Vice-Grip® pliers, but every experienced gunsmith knows the value of our mainspring vise. Avoid scratching your mainspring. Scratches form stress marks, eventually causing breakage. Draw the lock to half cock, slip on the spring vise, gently tighten the
|
|
Coil Mainspring Vise , to safely compress a coil mainspring
Coil Mainspring Vise This tool is designed to safely compress the coil mainspring in a Thompson Center and other similar imported locks that use a coil mainspring. Our customers report that this works to compress the coil mainspring on a H&R 622 pistol. Novice gun owners may try to disassemble a coil mainspring lock using a needle nose Vice-Grip
|
|
J.P. Beck Toeplate , brass
John Phillip Beck style toeplate, from the Lebanon County school of gunsmithing, circa 1765 to 1810. Toeplate width at widest point is 0.90"
|
|
J.P. Beck Toeplate , steel
John Phillip Beck style toeplate, from the Lebanon County school of gunsmithing, circa 1765 to 1810. Toeplate width at widest point is 0.90"
|
|
Nicholas Beyer Toeplate , brass
A Lebanon County style toeplate with unusual tulip finial, from the 1780 - 1840 era. Beyer's work is similar to the master J.P. Beck. Toeplate width at widest point is 0.90"
|
|
Nicholas Beyer Toeplate , steel
A Lebanon County style toeplate with unusual tulip finial, from the 1780 - 1840 era. Beyer's work is similar to the master J.P. Beck. Toeplate width at widest point is 0.90"
|