Your search for '斗破苍穹章节'
returned
5,642 results.
|
Rear sight , semi-buckhorn up to 1-1/8" barrels, Jim Bridger's Hawken style
This large version of our Kit Carson's Hawken rifle sight is intended for a barrel up to 1-1/8" octagon and is ideal for our Jim Bridger Hawken rifle parts. Tall, to reduce heat mirage, the center notch is indicated. Wax cast steel, made in the U.S.A., the dovetail is about .370" long and .625" wide. Dovetail to a depth of .050". Height from the bo
|
|
Rear sight, adjustable for elevation, wax cast steel
Attractive wax cast steel rear sight, adjustable for elevation using the center screw. The standard 3/8" dovetail base is covered by the sight. Enlarge the square slot as needed. The dovetail base measures .375" as-cast, a crisp clean casting along the edge grooves. Deburr the bottom of the dovetail base, removing the casting gate from this hidden
|
|
Rear sight , long base for 13/16" or 7/8" octagon barrel, wax cast steel
A crisp wax casting, not polished, this steel rear sight has an extra long base that may be trimmed to fit an over-sized dovetail, up to 1" length. The sight blade tilt minimizes mirage and glare. Made in the U. S. A., the dovetail is 1" long by .535" wide. Dovetail to a depth of .050". Height from the bottom of the dovetail to the top of the sight
|
|
|
Rear sight , long base for 15/16" or 1" octagon barrel, wax cast steel
A crisp wax casting, not polished, this steel rear sight has an extra long base that may be trimmed to fit an over-sized dovetail, up to 1" length. The sight blade tilt minimizes mirage and glare. Made in the U. S. A., the dovetail is 1" long by .580" wide. Dovetail to a depth of .050". Height from the bottom of the dovetail to the top of the sight
|
|
Rear sight, Large Buckhorn, for up to 1-1/8" barrels, wax cast steel
This big sight has a tiny square notch centered in a flat section surrounded by tall buckhorns. The dovetail base is .490" long, .720" wide. Dovetail 0.050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.39". It may be file fitted to smaller slots. Use this large buckhorn rear sight on an 1-1/8" octagon rifle barrel
|
|
Rear sight, low long base longrifle style for 13/16" or 7/8" barrels, wax cast steel
Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .535" wide for use on a 13/16" or 7/8" barrel. Dovetail to a depth of .050". Height from
|
|
|
Rear sight, low long base longrifle style for 15/16" or 1" barrels, wax cast steel
Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .575" wide for use on a 15/16" or 1" barrel. Dovetail to a depth of .050". Height from t
|
|
Rear sight , semi-buckhorn for barrels up to 15/16", Lyman Great Plains Rifle
This fixed rear sight is intended for a barrel up to 15/16" octagon. Tall, to reduce heat mirage, a square center notch is cut .070" wide by 0.10" deep. Wax cast steel, made in the Italy., the dovetail is about .350" long and .625" wide by .055" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.45".
|
|
Rear sight, Mariano Modena Hawken style for 15/16" or 1" barrels, wax cast steel
Patterned after an original rear sight found on a very early Hawken halfstock rifle, owned by the famous mountain man of Taos, Mariano Modena. Angular flats decorate the base of this semi-buckhorn sight. The base is .500" long by .580" wide. Dovetail .050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.29".
|
|
Rear sight, large Hawken style, wax cast steel
Wax cast steel, this rear sight has a long base to fit a slot .730" long, .590" wide and .050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.37". Easily shortened, this larger sight looks right on a big plains rifle with a 15/16" or 1" octagon barrel. Made in the U.S.A. This semi-buckhorn sight is one of our favori
|
|
Rear sight, Tennessee style, wax cast steel
Flat topped, with rounded edges, this sight will not cut your hand, nor snag your gun case. Notch is indicated, not cut. Use this on a rifle or pistol with a 13/16" or 7/8" octagon barrel. Wax cast steel, the dovetail is about .735" long as cast, and the sight base is .530" wide. Height from the bottom of the dovetail to the top of the sight notch
|
|
Rear sight, semi-buckhorn style for 13/16", or 7/8" octagon barrel, wax cast steel
Wax cast steel, not polished, this traditional style sight is suitable for a long rifle with a 13/16", or 7/8" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., dovetail to a depth of .050", dovetail is .380" long, and
|
|
|
Rear sight, semi-buckhorn style for 15/16", or 1" octagon barrel, wax cast steel
Wax cast steel, not polished, this traditional style sight is suitable for a long rifle with a 15/16", or 1" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., dovetail to a depth of .050", dovetail is .375" long, and .5
|
|
Rear sight, George Schreyer, York County style, fits up to 7/8" octagon, wax cast steel
This York County rear sight is modeled after one by George Shreyer. It will make a excellent choice for your next longrifle. Made in the U.S.A. from wax cast steel. Cut your dovetail .050" deep, not more than .062" deep, .740" long, by .530" wide for 7/8" octagon, or file trim the edges to fit a 13/16" barrel. Height from the bottom of the dovetail
|
|
|
Rear sight, George Schreyer, York County style, fits up to 1" octagon, wax cast steel
This York County rear sight is modeled after one by George Shreyer. It will make a excellent choice for your next longrifle. Made in the U.S.A. from wax cast steel. Cut your dovetail .050" deep, not more than .062" deep, .740" long, by .580" wide for 1" octagon, or file trim the edges to fit a 15/16" barrel. Height from the bottom of the dovetail t
|
|
Rear Sight Elevation Screw , for Thompson Center Hawken, Renegade, and others, 4-40 threads, adjustment clicks, blued steel
Rear sight elevation screw, for Thompson Center Hawken, Renegade, and New Englander. 4-40 threads, adjustment clicks, blued steel. Head diameter 0.31". Will not fit the Cherokee, or Seneca rear sights.
|
|
Rear Sight Elevation Screw No. 2 , for earlier Thompson Center Hawken, Renegade, and others, 5-40 threads, adjustment clicks, blued steel
Rear sight elevation screw, for early production Thompson Center Hawken, Renegade, and New Englander. 5-40 threads, adjustment clicks, blued steel. Head diameter 0.31". Will not fit the Cherokee, or Seneca rear sights.
|