Handles, for bullet mold, LEE Commercial mold handles, fit Lyman, RCBS and similar mold blocks, and also LEE multi-cavity molds. Notice the geometry of the inner jaws, at the mounting screw holes. The slight angle allows both large and small Lyman molds to align perfectly. Considering the low cost, long length for leverage, and cool comfortable ope

Ingot mold, by LEE, for casting ingots of bullet casting alloys. This aluminum ingot mold has a cool wooden handle. It makes both 1 pound and 1/2 pound ingots, allowing 1 to 10, or 1 to 20 ratio of ingots, when mixing your own bullet alloys in small lots, in your 10 pound or 20 pound pot. We find this ingot mold essential, since it catches the drip

Finger tighten, set and forget, they never move. Just be sure to always loosen your dies by turning the ring, not the die. Works on all brands of dies. Set of three rings. These are now the spline drive style.

Features Ash hardwood construction utilizing the same wood species baseball bats are made from. Use to generally release bullets from mold cavities. Ergonomic design makes it convenient and comfortable to use during long casting sessions. Mallet is 10 inches long.

Fifteen plastic uniformly graduated and proportioned powder dippers. Slide card shows the grains of powder each measure will dispense for every type of powder.

A 500 watt higher speed melter, holds 4 lbs of lead and melts it in less than 15 minutes, easily supplying multi-cavity gang molds. Designed for continuous duty. Warranted 2 years, by Lee.

Serious shooters, groups and clubs appreciate this bigger pot, with extra height. Great for molds with removable base plugs. Holds 10 lbs, and melts in less than 20 minutes. 500 watt capacity with thermostat temperature controller built in. No dipper needed, this pot supplies molten metal through the bottom valve. Tubular heating element. Warranted

Double ended design cleans both large and small primer pockets. Cost so little and works so well. Don't go without one.

Holds approximately 20 lbs of lead. This design incorporates the famous Lee high-efficiency design and dependable remote sensing thermostat, now in a dust tight housing. Long life 700 watt tubular heating element assures quick melting and rapid recovery. New micro adjustable flow control valve adjusts instantly with a twist of a screwdriver. Front

Primes on the press up-stroke for a more sensitive feel. Includes easy to change punches for both large and small primers. Fits all brands of presses.

The finest automotive deep draw lubricant. Lee lube is pleasant to handle and you can thin it with water. Non-sticky, non-allergenic. Very little is needed. Makes sizing less work.

Powder safety scale has 110 grain capacity, removable aluminum scale pan and magnetic dampening.

Shell holder, #3, by LEE, for .30-30, .32-20 & .38-55 Winchester.

Shell holder, #5, by LEE, for .30-40 Krag

Shell holder, #8, by LEE, for 38-56, 40-65,& 45-70 to .45-120 calibers.

Shell holder, #11, by LEE, for 44 Russian and .45 Long Colt.

Shell holder, #14, by LEE, for .38-40 & .44-40 Winchester.

Shell holder, #17, by LEE, for .8mm Lebel

Shell holder, #18, by LEE, for .43 Mauser.

Lee Six (6) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprues. Each of the six cavities is three stacked .320" diameter balls for a total of 18 total pieces. Stock photo shown, cavity appearance varies by diameter. The

Lee Six (6) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprues. Each of the six cavities is three stacked .330" diameter balls for a total of 18 total pieces. Stock photo shown, cavity appearance varies by diameter. The

Lee Six (6) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprues. Each of the six cavities is three stacked .360" diameter balls for a total of 18 total pieces. Stock photo shown, cavity appearance varies by diameter. The

Lee Six (6) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprues. Each of the six cavities is three stacked .300" diameter balls for a total of 18 total pieces. Stock photo shown, cavity appearance varies by diameter. The

Lee Six (18) Cavity Mold Blocks require our #Lee Handle sold separately. The special alloy sprue plate can never attract solder smears, and has a cam action assist to ease cutting all six sprues. Each of the six cavities is three stacked .240" diameter balls for a total of 18 total pieces. Stock photo shown, cavity appearance varies by diameter. Th

Accurately measure lead, bismuth and steel. Telescoping cup adjustable from 7/8 to 1 7/8 oz. Calibrated for lead shot. Works perfect for large pellet sizes. With steel, simply count out pellets or weigh and set dipper accordingly.