
This kit will require assembly. The walnut stock will require final shaping, sanding, and finishing. The brass furniture will require polishing. The percussion Investarm Hawken Rifle features a hooked breech, wedge key, double set triggers, adjustable rear sight, and 28" barrel. Stock photo shown. The .50 caliber rifle average weight is 9.2. pounds.
This classic muzzleloading rifle offers such high quality features as .50 caliber 28" barrel, with 1 turn in 48" twist, for use with a patched round ball or conical. The rear sight is screw adjustable for elevation and windage. A Hawken style hooked breech engages a separate tang, for ease of cleaning after shooting. The hooked breech is easily dismounted for cleaning. A single wedge key is fitted through oval brass inlays. After pressing out the wedge key from the forend, withdraw the ramrod, and lift the muzzle end to unhook the breech. We stock the #RLGP-S stainless No. 11 nipple, with 6-.75mm threads, for Investarm percussion rifles. Fitted with a reliable coil spring lock, the lock is case hardened in mottled colors.
Double lever double set triggers are fitted, for target shooting, or hunting. The triggers are well adjusted, to allow cocking the lock, or setting the trigger, in any sequence. You may fire the rifle with the trigger set, for a hair trigger release. Or, fire this rifle with the trigger unset, for a firm normal trigger release, ideal for cold weather hunting, or youth training.
This Hawken Rifle kit by Investarms of Italy will require assembly and finishing. The .50 caliber rifle has a 1 in 48" rate of twist for a patched round ball or conicals. The percussion lock is fitted to double lever double set triggers that fire set, or unset. Stock photo shown. Inspect the item, return it unfired for same day refund if not delighted. You will be pleased with your choice. You pay postage, your only risk.
This classic muzzleloading rifle offers such high quality features as .50 caliber 28" barrel, with 1 turn in 48" twist, for use with a patched round ball or conical. The rear sight is screw adjustable for elevation and windage. A Hawken style hooked breech engages a separate tang, for ease of cleaning after shooting. The hooked breech is easily dismounted for cleaning. A single wedge key is fitted through oval brass inlays. After pressing out the wedge key from the forend, withdraw the ramrod, and lift the muzzle end to unhook the breech. We stock the #RLGP-S stainless No. 11 nipple, with 6-.75mm threads, for Investarm percussion rifles. Fitted with a reliable coil spring lock, the lock is case hardened in mottled colors.
Double lever double set triggers are fitted, for target shooting, or hunting. The triggers are well adjusted, to allow cocking the lock, or setting the trigger, in any sequence. You may fire the rifle with the trigger set, for a hair trigger release. Or, fire this rifle with the trigger unset, for a firm normal trigger release, ideal for cold weather hunting, or youth training.
This Hawken Rifle kit by Investarms of Italy will require assembly and finishing. The .50 caliber rifle has a 1 in 48" rate of twist for a patched round ball or conicals. The percussion lock is fitted to double lever double set triggers that fire set, or unset. Stock photo shown. Inspect the item, return it unfired for same day refund if not delighted. You will be pleased with your choice. You pay postage, your only risk.
bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20
.490" round balls, pure lead, hand cast, per 100
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Bore mop, 100% Cotton, for .48 to .50 caliber, 10-32 thread, washable
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Powder measure, brass, adjustable 0 to 120 grains, with spout
Nipple Wrench for Rifles, short style, with slotted end
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Ramrod,
3/8" hickory, 48" long, brass tip, 10-32 thread
Made in the U.S.A.
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken,
3/8" brown Delrin nylon, 28-5/8".
Flared brass tip, threaded 8-32 at front, 10-32 at rear.
Made in the U.S.A.
Our Strongest Loading & Cleaning Rod,
5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken,
Creedmoor, rigid handle, 10-32 thread
Nipple, 6-.75mm metric thread, for Investarm Gemmer Hawken, Lyman Great Plains, Deerstalker, Trade Rifle #11 CCI cap, stainless steel
- Cone length: 0.375"
- Thread journal length: 0.195"
- Overall length: 0.570"
- Diameter of base: 0.307"
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
BALL-50-385
bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20
BALL-50-MAXI
bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
RAMROD-285-TC
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken,
3/8" brown Delrin nylon, 28-5/8".
Flared brass tip, threaded 8-32 at front, 10-32 at rear.
Made in the U.S.A.
RAMROD-C-29-10
Our Strongest Loading & Cleaning Rod,
5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken,
Creedmoor, rigid handle, 10-32 thread
RLGP-S
Nipple, 6-.75mm metric thread, for Investarm Gemmer Hawken, Lyman Great Plains, Deerstalker, Trade Rifle #11 CCI cap, stainless steel
Cone length: 0.375" Thread journal length: 0.195" Overall length: 0.570" Diameter of base: 0.307"