This nice .54 caliber Invest Arm Hawken percussion rifle is ready to shoot. This rifle is very similar is shape to rifles produced by Thompson Center. This factory finished rifle is stocked in European walnut, with brass furniture, and blued 28" barrel. Weight is 8.4 pounds, and with a trigger reach of 14-1/8 inches, the rifle is perfectly setup for today's typical to large man size shooter. This rifle appears to have a very few handling marks on the stock. The sights have been changed to a fiber optic front sight and Thompson Center peep sight.
The factory polished blued barrel is .54 caliber, 15/16" octagon, 28" length. In very good condition the bore is clean and ready to go, with crisp rifling grooves. We recommend our .530" round ball, .015" lubricated patch over a charge of 70 grains of GOEX FFg black powder. The barrel is fitted with a fiber optic front sight, the barrel mounted rear sight has been removed and the mounting holes are unfilled. The tang is fitted with a Thompson Center 7194 peep sight. The aperture has been removed and the hole in the post was used a a "ghost ring".
The walnut stock has been finished with a satin varnish. The stock has a few small handling marks on the toe of the stock. The brass furniture has started to age to a mellow patina with some scattered speckling and dark streaks. The buttstock is fitted with a large oval capbox. The beaver tail cheek piece is shaped for a right hand shooter.
The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.
The color case hardened percussion lock is factory engraved. The breech is fitted with a 6-.75mm threaded nipple with a brass flash cup. Order our #RLGP-S if you need a spare. Double lever double set triggers are well adjusted, to fire set or unset. When the rear trigger is set (latched), the front trigger has a hair-trigger release. The adjustment screw between the triggers allows even finer or coarser adjustment, as desired. Or, turn the screw fully inboard, to disable the set trigger feature, when hunting in very cold weather.
Used with a bright bore and a few small handling marks on the stock. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The factory polished blued barrel is .54 caliber, 15/16" octagon, 28" length. In very good condition the bore is clean and ready to go, with crisp rifling grooves. We recommend our .530" round ball, .015" lubricated patch over a charge of 70 grains of GOEX FFg black powder. The barrel is fitted with a fiber optic front sight, the barrel mounted rear sight has been removed and the mounting holes are unfilled. The tang is fitted with a Thompson Center 7194 peep sight. The aperture has been removed and the hole in the post was used a a "ghost ring".
The walnut stock has been finished with a satin varnish. The stock has a few small handling marks on the toe of the stock. The brass furniture has started to age to a mellow patina with some scattered speckling and dark streaks. The buttstock is fitted with a large oval capbox. The beaver tail cheek piece is shaped for a right hand shooter.
The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.
The color case hardened percussion lock is factory engraved. The breech is fitted with a 6-.75mm threaded nipple with a brass flash cup. Order our #RLGP-S if you need a spare. Double lever double set triggers are well adjusted, to fire set or unset. When the rear trigger is set (latched), the front trigger has a hair-trigger release. The adjustment screw between the triggers allows even finer or coarser adjustment, as desired. Or, turn the screw fully inboard, to disable the set trigger feature, when hunting in very cold weather.
Used with a bright bore and a few small handling marks on the stock. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
Related Products Shown Below
BALL-54-MAXI
bullets, .54 caliber, T/C Maxi-Ball, 425 grains, per 20
BALL-530
.530" round balls, pure lead, Hornady, per 100
BORE-CLEAN
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
BP-54-10
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
BRUSH-54-10
Bore brush, bronze, for .54 caliber, 10-32 thread
CAPPER-P
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
FS-54-10
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
JS-54-6-10
Jag, jagged cleaning tip, brass, .54 caliber, 3/8" rod, 10-32 thread
MAS-120
Powder measure, brass, adjustable 0 to 120 grains, with spout
OX-15-50-D
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
RAMROD-285-TC
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken,
3/8" brown Delrin nylon, 28-5/8".
Flared brass tip, threaded 8-32 at front, 10-32 at rear.
Made in the U.S.A.
RAMROD-285-TC-H
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken,
3/8" stained hickory, 28-5/8" long.
Flared brass tip threaded 8-32 at front, 10-32 thread at rear.
Made in the U.S.A.
RAMROD-C-29-10
Our Strongest Loading & Cleaning Rod,
5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken,
Creedmoor, rigid handle, 10-32 thread
RLGP-S
Nipple: 6-.75mm metric thread ~Investarm Gemmer, Bridger, Cabela's Hawken & Lyman Great Plains, Deerstalker, Trade Rifle~ No. 11 CCI cap, stainless steel
ST-8
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
WORM-T2-10
Patch puller worm, double tine, steel, 10-32 thread, made in the U.S.A.
