This .54 caliber Thompson Center Hawken percussion rifle is ready to shoot. This rifle is stocked in American black walnut with brass furniture, and blued 28" straight octagon barrel. The bore is bright and has been well maintained. The buttstock has some brass tacks added, and the right hand side of the barrel has a few scuff marks on the blue finish. Weight is 8.9 pounds, and with a trigger reach of 13-3/4", the rifle is perfectly setup for today's average sized shooter.
The factory polished blued barrel is .54 caliber, 1" octagon, 28" length. The front sight is Thompson Center's blued steel bead sight. The rear sight is click adjustable for elevation, and screw adjustable for windage. The bluing on this rifle has some scattered marks on the right hand side of the barrel near the muzzle, otherwise it appears to be in excellent condition. The breech plug is missing the small filler screw on the breech plug for a telescopic sight base. The bore is bright and clean, with crisp rifling grooves. We recommend our .530" round ball, .015" patch, and Mink Oil tallow patch lubricant, over a charge of 70 grains of GOEX FFg black powder. This rifle pre-dates the QLA muzzle and the bore is rifled all the way to the end of the muzzle.
The American black walnut stock is stained to a dark brown with reddish undertone and finished to a satin sheen. The buttplate, patchbox, nosecap, and triggerguard have all aged to a mellow patina. Brass tacks have been added to the stock along the buttplate edge. Our top view shows the hooked breech of the barrel, which can be dismounted by removing the ramrod and wedge key, for easy cleaning. The wood ramrod is fitted with brass tips. The rear tip is threaded 10-32 to accept loading and cleaning accessories. The ramrod is retained by two round brass pipes. The single lock bolt has a round brass washer-style side plate. The beaver tail cheek piece is shaped for a right hand shooter.
Our lock view shows the color case hardened percussion lock, factory engraved by Thompson Center. This lock works smoothly, with a strong mainspring, and fly detent to allow the use of double set triggers. The breech is fitted with a stainless steel nipple for No. 11 percussion caps. The set triggers are correctly adjusted, you may cock the lock, or set the trigger, in any sequence. Turn the tiny set trigger adjustment screw, between the two triggers, inboard to reduce the set trigger release tension.
Used, this rifle has some wear, but is in overall good condition, with a bright well maintained bore. It will serve you well in the woods this Fall or at the range! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The invite trades, and we buy T/C guns. If you have a used Thompson Center Seneca, Hawken, Cherokee, Renegade, Patriot Pistol, New Englander, or other muzzle loading side hammer rifle, please consider our service when you are ready to sell. Our customers like these well made American guns, for their reliable service, durable reputation, accuracy, and good value. Order this gun today!
The factory polished blued barrel is .54 caliber, 1" octagon, 28" length. The front sight is Thompson Center's blued steel bead sight. The rear sight is click adjustable for elevation, and screw adjustable for windage. The bluing on this rifle has some scattered marks on the right hand side of the barrel near the muzzle, otherwise it appears to be in excellent condition. The breech plug is missing the small filler screw on the breech plug for a telescopic sight base. The bore is bright and clean, with crisp rifling grooves. We recommend our .530" round ball, .015" patch, and Mink Oil tallow patch lubricant, over a charge of 70 grains of GOEX FFg black powder. This rifle pre-dates the QLA muzzle and the bore is rifled all the way to the end of the muzzle.
The American black walnut stock is stained to a dark brown with reddish undertone and finished to a satin sheen. The buttplate, patchbox, nosecap, and triggerguard have all aged to a mellow patina. Brass tacks have been added to the stock along the buttplate edge. Our top view shows the hooked breech of the barrel, which can be dismounted by removing the ramrod and wedge key, for easy cleaning. The wood ramrod is fitted with brass tips. The rear tip is threaded 10-32 to accept loading and cleaning accessories. The ramrod is retained by two round brass pipes. The single lock bolt has a round brass washer-style side plate. The beaver tail cheek piece is shaped for a right hand shooter.
Our lock view shows the color case hardened percussion lock, factory engraved by Thompson Center. This lock works smoothly, with a strong mainspring, and fly detent to allow the use of double set triggers. The breech is fitted with a stainless steel nipple for No. 11 percussion caps. The set triggers are correctly adjusted, you may cock the lock, or set the trigger, in any sequence. Turn the tiny set trigger adjustment screw, between the two triggers, inboard to reduce the set trigger release tension.
Used, this rifle has some wear, but is in overall good condition, with a bright well maintained bore. It will serve you well in the woods this Fall or at the range! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The invite trades, and we buy T/C guns. If you have a used Thompson Center Seneca, Hawken, Cherokee, Renegade, Patriot Pistol, New Englander, or other muzzle loading side hammer rifle, please consider our service when you are ready to sell. Our customers like these well made American guns, for their reliable service, durable reputation, accuracy, and good value. Order this gun today!
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
Related Products Shown Below
BALL-54-MAXI
bullets, .54 caliber, T/C Maxi-Ball, 425 grains, per 20
BALL-530
.530" round balls, pure lead, Hornady, per 100
BORE-CLEAN
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
BP-54-10
Ball puller, steel screw, .54 caliber brass collar, 10-32 thread
BRUSH-54-10
Bore brush, bronze, for .54 caliber, 10-32 thread
CAPPER-P
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
FLUSH-RST
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
FS-54-10
Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread
HOT-SHOT-RST
Nipple: 1/4-28 thread ~Hot Shot® for Thompson Center Hawken & other popular guns~ No. 11 CCI cap, stainless steel
JS-54-6-10
Jag, jagged cleaning tip, brass, .54 caliber, 3/8" rod, 10-32 thread
MAS-120
Powder measure, brass, adjustable 0 to 120 grains, with spout
OX-15-50-D
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
RAMROD-6-10-B
Ramrod,
3/8" hickory, 47" long, brass tip, 10-32 thread
Made in the U.S.A.
RAMROD-285-TC
Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken,
3/8" brown Delrin nylon, 28-5/8".
Flared brass tip, threaded 8-32 at front, 10-32 at rear.
Made in the U.S.A.
RST-I
Nipple: 1/4-28 thread ~Standard Rifle~ No.11 CCI cap, hardened steel, square shank, ideal for restoration
RST-S
Nipple: 1/4-28 thread ~Standard Rifle~ No. 11 CCI cap, stainless steel
ST-8
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
WORM-T2-10
Patch puller worm, double tine, steel, 10-32 thread, made in the U.S.A.
