This pistol is used with some handling mark on the stock and barrel, and a small crack running from the sideplate up to the barrel channel. Stocked in walnut, with 15/16" octagon barrel, color hardened percussion lock, and brass triggerguard, this Plains Pistol has the classic 1830 era bag butt architecture. This is a very comfortable grip, large enough for man sized hands, with enough drop and curve to make aiming as instinctive as pointing your finger. This pistol comes in the original factory carton with paperwork.
The 15/16" octagon barrel is 8" long and finished with a deep blue color with bright spots near the muzzle from normal shooting and cleaning. The .50 caliber bore is rifled with six equal lands and grooves, ideal for patched round ball. The bore is bright, clean, and has been well maintained. The top flat of the barrel is marked - LYMAN - MIDDLEFIELD - CONN -. The off flats are marked with the proof marks and PLAINS PISTOL .50. Iron front and rear sights are dovetail mounted to the barrel.
The stock is finished to a medium tan with a few small handling marks. The grip rail of the brass triggerguard is mounted with two blued steel screws. The forend is fitted with a blued steel forend cap, with integral ramrod hole. A 3/8" diameter ramrod serves this pistol. Sold separately order our #PL-7-50, pistol loading rod with .50 caliber jag and ball starter, which is ideal for use with this pistol. The left side view shows the sideplate with single lock bolt. We note a small crack running from the sideplate up to the barrel channel.
The hooked breech, and single wedge key, allow the barrel to be dismounted for easy cleaning. Use our #NW-160 nipple wrench, sold separately, to remove the stainless steel nipple, when flushing the barrel. The percussion lock is color case hardened and has a strong mainspring. A stainless steel nipple for No. 11 percussion cap is fitted in the bolster. The single trigger provides a smooth release of the lock.
This will make a fine companion piece for your .50 caliber percussion Hawken, Great Plains, or Mountain rifle! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The 15/16" octagon barrel is 8" long and finished with a deep blue color with bright spots near the muzzle from normal shooting and cleaning. The .50 caliber bore is rifled with six equal lands and grooves, ideal for patched round ball. The bore is bright, clean, and has been well maintained. The top flat of the barrel is marked - LYMAN - MIDDLEFIELD - CONN -. The off flats are marked with the proof marks and PLAINS PISTOL .50. Iron front and rear sights are dovetail mounted to the barrel.
The stock is finished to a medium tan with a few small handling marks. The grip rail of the brass triggerguard is mounted with two blued steel screws. The forend is fitted with a blued steel forend cap, with integral ramrod hole. A 3/8" diameter ramrod serves this pistol. Sold separately order our #PL-7-50, pistol loading rod with .50 caliber jag and ball starter, which is ideal for use with this pistol. The left side view shows the sideplate with single lock bolt. We note a small crack running from the sideplate up to the barrel channel.
The hooked breech, and single wedge key, allow the barrel to be dismounted for easy cleaning. Use our #NW-160 nipple wrench, sold separately, to remove the stainless steel nipple, when flushing the barrel. The percussion lock is color case hardened and has a strong mainspring. A stainless steel nipple for No. 11 percussion cap is fitted in the bolster. The single trigger provides a smooth release of the lock.
This will make a fine companion piece for your .50 caliber percussion Hawken, Great Plains, or Mountain rifle! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
BALL-490
.490" round balls, pure lead, Hornady, per 100
BORE-CLEAN
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
BORE-MOP-50-10
Bore mop, 100% Cotton, for .48 to .50 caliber, 10-32 thread, washable
BP-50-10
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
JS-50-6-10
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
MAS-050
Powder measure, brass, adjustable 0 to 50 grains, with spout
NW-160
Nipple Wrench for Rifles, short style, with slotted end
OX-15-50-D
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
OX-15-50-W
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, wonder-lube
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
PICK-NIPPLE
Spring steel nipple pick,
with bone bead handle
PL-7-50
Pistol loading rod and short starter with .50 caliber cleaning jag,
7/16" diameter hickory rod, 10-32 threads,
12" overall usable length including .50 caliber cleaning jag
RAMROD-082-LPP
Ramrod for Lyman Plains Pistol,
3/8" Delrin nylon, 8-1/4" long.
Brass tips are threaded 8-32 at flared front, and 10-32 at rear.
Made in the U.S.A.
RAMROD-082-LPP-H
Ramrod for Lyman Plains Pistol,
3/8" stained hickory, 8-1/4" long.
Brass tips are threaded 8-32 at flared front, and 10-32 at rear.
Made in the U.S.A.
RLGP-S
Nipple: 6-.75mm metric thread ~Investarm Gemmer, Bridger, Cabela's Hawken & Lyman Great Plains, Deerstalker, Trade Rifle~ No. 11 CCI cap, stainless steel
