Your search for rear sight returned 185 results.
This long-range 5" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to s
Blued steel, over 5" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 3 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D
Blued steel, over 3" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 2 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D
William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Henry lever action rifles. Lyman recommends this sight for the following models:H006 – Big Boy, Big Boy Carbine, Big Boy SilverH009 – All-Weather 30-30H010 – All-Weather 45-70H012 – Big Boy All Weath
William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Marlin fits Model 1895, 336 and 30. A base adapter protects the serial number. Holes are on .834" centers. Sights include one longer 12-32 tang bolt, two 10-32 mounting screws, detailed instructions
William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. This Lyman No. 2 sight is designed to fit a Aldo Uberti & Company manufactured Winchester Model 1873 lever action rifle. This sight has standard Winchester 2.195" bolt centers. Maximum elevation from the base to the center o
William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Winchester fits their Model 94, 1894, 1866, 1890, 1892, 62, and 62A lever action rifles, Model 1885 high wall and low wall single shot rifles, and Rossi Model 92 and 62 rifles and carbines. This sigh
Screw for Sharps Tang Sight, #10-28 thread, steel to mount Sharps tang sight. These screws have a 5/16" diameter head, a overall length of .42", and threaded shaft of .29". Two of these screws are required to mount a tang sight on an a Sharps rifle. This odd #10-28 special thread size fits the original antique Sharps rifle, Shiloh Sharps, C. Sharps
One (1) screw for Sharps Tang Sight, #10-28 thread, bright steel to mount Sharps tang sight. These screws have a .312" diameter head for fit American manufactured tang sight bases, such as Axtell, or MVA. Overall length of .375", and threaded shaft of .26". Two of these screws are required! to mount a tang sight on an a Sharps rifle. This odd #10-2
Screw for Sharps Tang Sight, #10-28 thread, bright steel to mount Sharps tang sight. These screws have a .270" diameter head for fit Italian manufactured tang sight base. Overall length of .37", and threaded shaft of .26". Two of these screws are required! to mount a tang sight on an a Sharps rifle. This odd #10-28 minimum diameter thread size fits
Screw for Sharps Tang Sight, #10-32 thread, blued steel to mount Davide Pedersoli mid or long range 1874 Sharps tang sight to the Lyman 1878 Sharps rifle. These screws have a .270" diameter head for fit Italian manufactured tang sight base. Overall length of .375", and threaded shaft of .265". Two of these screws are required! to mount a tang sight
Screw for Sharps Tang Sight, 4-.7mm thread, bright steel to mount Sharps tang sight. These screws have a .270" diameter head for fit Italian manufactured tang sight base. Overall length of .365", and threaded shaft of .27". Two of these screws are required! to mount a tang sight on an a 1863 or 1874 Sharps rifle by Pedretti, SILE, EMF, IAB, Powder
A part-by-part examination of the trapdoor Springfield rifle and carbine, with illustrations showing the variations found within serial number ranges. Parts from various models became mixed, as arms were returned to the arsenal, for repair or upgrade. Learn if your 45-70 Springfield is assembled from the correct as-issued parts. An important refere
Prompt service: Our gunsmith will mill a dovetail for a front sight, rear sight, or underlug we offer, using a milling machine and dovetail cutter. Hand fitted: no extra cost! When you buy the sights or lugs from us, we will remove any burrs, gates and parting lines, and hand fit the sight or lug to the dovetail slot, ready for you to finish and us
This antique halfstock Ohio rifle has a beautiful warm patina that is a joy to handle and display. The rifle is stocked in walnut and trimmed in brass furniture. The barrel is stamped with a professional stamp DAVID HUDSON behind the rear sight. Gunmakers of Ohio, Volume 1 by David Huslar notes that David Hudson of Napoleon, Ohio is shown in tax re
The Plains Rifle was carried across the Great Plains, by western pioneers and fur trappers. It was the culmination of years of firearms development. The Investarms Great Plains Rifle is similar to rifles built by the famous Saint Louis rifle makers, Samuel Hawken, Gemmer, and Horace E. Dimick to the meet the demands of experienced backwoodsmen. St
This Thompson Center Hawken Cougar Rifle is used with handling marks on the stock and barrel. The rifle is stocked in figured American walnut and the barrel has been blued while the stainless steel furniture and lock plate are finished to a matte tone. With an overall weight of 8 pounds and a trigger reach of 14", this rifle is perfectly suited for
Stocked in walnut this .50 caliber percussion rifle has a 15/16" octagon 28" barrel to give it a modest weight. Trimmed in brass furniture with a large bow single trigger. The lock is color case hardened in mottled colors. Weighing in at 8.7 pounds the rifle has a trigger reach of 13-3/4" making it well suited for today's average size shooter. The
This fine long rifle is a magnificent piece of work by the famous contemporary long-rifle maker, Mr. Robert Harn. This rifle is modeled after the antique rifle shown as No. 119 in Rifles of Colonial America, Volume 2, by the late George Shumway. The antique rifle is thought to have been made in a region with strong English connections. Expertly cra
A great number of Sharps carbines were manufactured during the American Civil War for cavalry units. This breech loading percussion Sharps Rifle features a .54 caliber 22" tapered round barrel, color case hardened action, blued steel furniture, barrel, saddle ring, and walnut stock. This carbine has been altered with tacks and coins inlet into the
This left Hawken halfstock rifle is stocked in walnut and trimmed in iron furniture. The walnut stock is finished dark and the iron furniture is fire blued. Assembled around a .54 caliber tapered octagon barrel, this plains rifle will be ideal for large game hunting, or silhouette match use. Trigger reach is 14", to fit a 6" or taller shooter. This
This nice Southern Mountain or Tennessee flintlock longrifle is in as-new unfired condition. Stocked in straight grain maple, stained to a dark brown this rifle has smooth oil finish. The large Siler flintlock, Hatfield barrel, and iron furniture are finished to a dark brown. With an overall weight of 7 pounds and a trigger reach of 13-5/8" this lo
This percussion Rocky Mountain Hawken half-stock rifle was manufactured by Davide Pedersoli & Co. The rifle is stocked in curly maple, trimmed in traditional iron furniture with color case hardened finish. This rifle appears to be unfired and has the factory box. Weighing in at 10.2 pounds the rifle has a trigger reach of 13-3/4" making it well sui
This percussion Rocky Mountain Hawken half-stock rifle was manufactured by Davide Pedersoli & Co. The rifle is stocked in curly maple, trimmed in traditional iron furniture with color case hardened finish. This rifle is used and the stock has developed a drying check at the corner of the buttplate comb where the wood has pulled against the buttplat