Almost sculptured, this sight base is machined from solid brass stock, with a 0.375" dovetail about 0.750" wide, and 0.062 deep. Slotted to accept sheet stock .062" thick, order our #SHEET-062-B or #SHEET-062-S and cut your own sight blade. Available in brass, steel, or copper.

Almost sculptured, this sight base is machined from solid copper stock, with a 0.375" dovetail about 0.750" wide, and 0.062 deep. Slotted to accept sheet stock .062" thick, order our #SHEET-062-B or #SHEET-062-S and cut your own sight blade. Available in brass, steel, or copper.

Almost sculptured, this sight base is machined from solid steel stock, with a 0.375" dovetail about 0.750" wide, and 0.062" deep. Slotted to accept sheet stock .062" thick, order our #SHEET-062-B or #SHEET-062-S and cut your own sight blade. Available in brass, steel, or copper.

Our gunsmith will install your soldered lugs and front sight: promptly, centered, ready for use, at low cost. Allow us to choose the best positions for a fusil or fowler.

This sight has a classic Germanic appearance and is appropriate for a Jeager hunting rifle, or early Transitional longrifle. The wide violin shaped base will overhang the dovetail, a correct feature on German rifles. Dovetail is .370" long, by .705" wide, dovetail to a depth of .050". Height from the bottom of the dovetail to the top of the sight n

A part-by-part examination of the trapdoor Springfield rifle and carbine, with illustrations showing the variations found within serial number ranges. Parts from various models became mixed, as arms were returned to the arsenal, for repair or upgrade. Learn if your 45-70 Springfield is assembled from the correct as-issued parts. An important refere

Prompt service: Our gunsmith will mill a dovetail for a front sight, rear sight, or underlug we offer, using a milling machine and dovetail cutter. Hand fitted: no extra cost! When you buy the sights or lugs from us, we will remove any burrs, gates and parting lines, and hand fit the sight or lug to the dovetail slot, ready for you to finish and us

This halfstock rifle has the appearance of a 1860 or later era longrifle. Stocked in walnut an trimmed in period nickel silver furniture. The furniture includes a crescent buttplate and triggerguard with finger spurs. The stock is fitted with a poured pewter forend cap, single wedge key with escutcheon plates. The breech/wrist has a saw handle desi

Investarms drop-in barrel, .45 caliber with 1-48" twist for a patched round ball. 15/16" octagon by 32" length. Percussion ignition for Investarms produced Lyman Great Plains rifles and Investarms Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, thi

Investarms drop-in barrel, .45 caliber with 1-48" twist for a patched round ball. 15/16" octagon by 32" length. Flintlock ignition for Investarms produced Lyman Great Plains rifles and Investarms Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, this

Investarms drop-in barrel, .50 caliber with 1-60" twist for a patched round ball. 15/16" octagon by 32" length. Percussion ignition for Investarms produced Lyman Great Plains rifles and Investarms Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, thi

Investarm drop-in barrel, .50 caliber with 1-60" twist for a patched round ball. 15/16" octagon by 32" length. Flintlock ignition for Investarm produced Lyman Great Plains rifles and Investarms Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, this n

Investarm drop-in barrel, .54 caliber with 1-60" twist for a patched round ball. 15/16" octagon by 32" length. Percussion ignition for Investarm produced Lyman Great Plains rifles and Investarm Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, this n

Investarm drop-in barrel, .54 caliber with 1-60" twist for a patched round ball. 15/16" octagon, 32" length. Flintlock ignition for Investarm produced Lyman Great Plains rifles and Investarm Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, this nice

Investarms drop-in barrel, .45 caliber with 1-48" twist for a patched round ball. 15/16" octagon by 28" length. Percussion ignition for Investarms produced Hawken, also sold as Bridger Hawken, Cabela's Hawken, will also fit the Lyman Trade rifles. The barrel, plug, adjustable rear sight, bead front sight, rib, and underlug are blued. Ramrod pipes a

Investarm drop-in barrel, .50 caliber with 1-48" twist for a patched round ball. 15/16" octagon by 28" length. Percussion ignition for Investarm produced Hawken, also sold as Bridger Hawken, Cabela's Hawken, and Lyman Trade rifles. The barrel, plug, adjustable rear sight, bead front sight, rib, and underlug are blued. Ramrod pipes are brass. Fully

Investarm drop-in barrel, .54 caliber with 1-48" twist for a patched round ball. 15/16" octagon, 28" length. Percussion ignition for Investarm produced Hawken, also sold as Bridger Hawken, Cabela's Hawken, and Lyman Trade rifle. The barrel, plug, adjustable rear sight, bead front sight, rib, and underlug are blued. Ramrod pipes are brass. Fully ass

Thompson Center Renegade barrel assembly, .50 caliber, 26" long by 1" octagon. The barrel is fitted with the late factory installed patridge blade front sight and rear sight. The front sight has been dressed down as shown. Rib has two steel ramrod pipes, and the underlug is dovetailed, The bore is bright and has been well maintained.

This is an 1840 - 1850 vintage design, known as a box-lock action. Rugged and simple, original gun makers such as the famous Edwin Wesson used the box lock action in their best rifles. This rifle has a steel action with steel breech plug insert for strength. The triggerguard, rod pipes, and buttplate are also steel finished to a dark brown. Weighin

This used .50 caliber rifle was made from a Thompson Center Hawken percussion rifle. The factory brass furniture has been replaced with iron furniture and the patchbox inlet covered by a piece of walnut. The 28" barrel is fitted with a bead front sight and a T/C brand peep sight mounted to the tang. The rifle is used with a few scattered handling m

This Schuetzen rifle is made for offhand match shooting. It features a Oregon Rifle Works .40 caliber 1-1/8" octagon barrel. The rifle is fitted a Lyman No. 17 globe front sight, the rear tang sight is adjustable for both windage and elevation. The figured walnut stock features some raised carving and is trimmed with brass furniture. Trigger reach

This percussion Rocky Mountain Hawken half-stock rifle was manufactured by Davide Pedersoli & Co. The rifle is stocked in curly maple, trimmed in traditional iron furniture with color case hardened finish. This rifle is used and the stock has developed a drying check at the corner of the buttplate comb where the wood has pulled against the buttplat

This percussion Rocky Mountain Hawken half-stock rifle was manufactured by Davide Pedersoli & Co. The rifle is stocked in curly maple, trimmed in traditional iron furniture with color case hardened finish. This rifle appears to be unfired and has the factory box. Weighing in at 10.2 pounds the rifle has a trigger reach of 13-3/4" making it well sui

Attractive wax cast steel rear sight, adjustable for elevation using the center screw. The standard 3/8" dovetail base is covered by the sight. Enlarge the square slot as needed. The dovetail base measures .375" as-cast, a crisp clean casting along the edge grooves. Deburr the bottom of the dovetail base, removing the casting gate from this hidden

This nice Southern Mountain or Tennessee flintlock longrifle is in as-new unfired condition. Stocked in straight grain maple, stained to a dark brown this rifle has smooth oil finish. The large Siler flintlock, Hatfield barrel, and iron furniture are finished to a dark brown. With an overall weight of 7 pounds and a trigger reach of 13-5/8" this lo