Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, musket cap, stainless steel, requires a well centered hammer cup! Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"

Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, #11 CCI cap, stainless steel Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"

Made of stainless steel with 1/4" square shank for a nipple wrench, "O" ring, and a large hole for better flushing action. Nipple end is turned for 3/16" vinyl tubing, included.

Nipple, Hot Shot® for CVA, Traditions, or other Spanish mfg. rifles, 6-1mm metric thread, for #11 CCI cap, stainless steel Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"

Sear, wax cast steel, drilled and tempered, for L&R RPL-02 CVA Hawken lock.

This model will replace the small Spanish Maslin percussion lock, and the similar locks by Russ Hamm, CVA, Traditions, Cochran, and Armsport. The rear of the lockplate has a pre-indicated marking for trimming to the round tail versions of these locks. Overall length is 4-1/2" x 7/8" width. Right hand only. This lock has thicker stronger internal sp

This right hand flint lock will replace the small Spanish Maslin flint lock, and similar locks by Russ Hamm, CVA, Traditions, Cochran and Armsport. The rear of the lockplate has a pre-indicated marking for trimming to the round tail versions of these locks. This lock has thicker stronger internal springs and parts than the Connecticut Valley Arms l

This percussion lock will replace and upgrade the large percussion lock on the CVA or Traditions Hawken Rifle, from Spain. Overall length 4.99” x 0.98" width. Right hand only. NOTE: this lock wll not fit the Traditions Woodsman or Traditions St. Louis Hawken. This lock has thicker stronger internal springs and parts than the Connecticut Valley Arms

This flint lock will replace the large flint lock on the CVA or Traditions Hawken Rifle, from Spain. Overall length 4.98” x 0.98” width. Right hand only. NOTE: this lock wll NOT fit the Traditions Woodsman or Traditions St. Louis Hawken. See the No. 7 RPL lock for those rifles. This lock has thicker stronger internal springs and parts than the Con

Ramrod rear tip, 3/8", brass, 10-32 thread, for Thompson Center and CVA style ramrods

Ramrod rear tip, 3/8", steel, 10-32 thread, for Thompson Center and CVA style ramrods

Ramrod rear tip, 3/8", nickel silver, 10-32 thread, for Thompson Center and CVA style ramrods

Ramrod forward tip, 3/8" diameter flared concave end, brass, 8-32 thread, for Thompson Center and CVA style ramrods

Ramrod forward tip, 3/8" diameter flared concave end, steel, 8-32 thread, for Thompson Center and CVA style ramrods

Ramrod forward tip, 3/8" diameter flared concave end, nickel silver, 8-32 thread, for Thompson Center and CVA style ramrods

Bridle screw, 6-40 thread.

Fly detent, steel, tempered, with hole for pivot. Long side of the fly goes against the half cock notch. Fly will not funtion if installed backwards!

Sear spring, die formed steel, tempered

Sear spring screw, 6-40 thread

Sear screw, .59" length, 6-40 thread

Tumbler screw, .400" head diameter, 6-40 thread

bridle, wax cast steel, tempered, use 6-40 screws.

Main spring, forged steel, tempered, for L&R RPL-01 Maslin lock, RPL-02 Hawken lock, RPL-04 Tennessee lock, RPL-07 Woodsman lock

Tumbler, wax cast steel, drilled and tempered, for L&R RPL-01 Maslin lock, RPL-02 Hawken lock, RPL-04 Tennessee

Powder drum, 12.5mm diameter, 6-1mm thread, drilled for 6-1mm nipple