This correct replica Colt Model 1860 Army revolver has a blued round barrel, color case hardened frame, steel back-strap, brass triggerguard, reddish brown walnut grips, and color case hardened loading lever. Manufactured by Armi San Marco for Traditions and marked just above the loading lever. The revolver has marks on the cylinder from the latch and light scratches in the blued barrel finish. The wedge key and surrounding area have many marks from being drifted in and out to disassemble the revolver. This revolver comes with a black leather military flap holster.
The frame and hammer are color case hardened. The cylinder and barrel are finished to a dark blue. The barrel is fitted with a brass front sight and the rear sight is a notch in the hammer to maximize the sight radius. The bore is bright and has been well maintained. The loading lever is color case hardened. The barrel is marked just above the loading lever A.S.M. BLACK POWDER ONLY CAL.44 MADE IN ITALY / Traditions. The brass triggerguard has aged to a mellow patina from long storage.
The factory recommends .451" round balls, and each chamber will hold 35 grains of FFFg powder. We recommend .454" balls, and 21 grains of GOEX FFFg powder, for best accuracy and best compression. Cover each ball with a small amount of our #LUBE-SPG bullet lubricant grease. Despite your best efforts, this revolver will need to be cleaned after 12 or 18 shots. Remove the wedge, barrel, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin. If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn and slightly damaged. Continued abuse will cause the cylinder and latch to become out-of-time. Simple cleaning and maintenance will prevent problems.
A used 1860 Colt revolver by Armi San Marco of Italy with a bright well maintained bore and a military holster. This pistol will be a joy to shoot at the range. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The frame and hammer are color case hardened. The cylinder and barrel are finished to a dark blue. The barrel is fitted with a brass front sight and the rear sight is a notch in the hammer to maximize the sight radius. The bore is bright and has been well maintained. The loading lever is color case hardened. The barrel is marked just above the loading lever A.S.M. BLACK POWDER ONLY CAL.44 MADE IN ITALY / Traditions. The brass triggerguard has aged to a mellow patina from long storage.
The factory recommends .451" round balls, and each chamber will hold 35 grains of FFFg powder. We recommend .454" balls, and 21 grains of GOEX FFFg powder, for best accuracy and best compression. Cover each ball with a small amount of our #LUBE-SPG bullet lubricant grease. Despite your best efforts, this revolver will need to be cleaned after 12 or 18 shots. Remove the wedge, barrel, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin. If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn and slightly damaged. Continued abuse will cause the cylinder and latch to become out-of-time. Simple cleaning and maintenance will prevent problems.
A used 1860 Colt revolver by Armi San Marco of Italy with a bright well maintained bore and a military holster. This pistol will be a joy to shoot at the range. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
BALL-450-200
Bullets
.450" diameter, 200 grain,
conical revolver bullet for .44 Army Revolvers,
cast from LEE 90382, pure lead, per 50
BALL-451
.451" round balls, pure lead, Hornady, per 100
BALL-454
.454" round balls, pure lead, Hornady, per 100
BC-CTL
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
BELT-BU-1B
Belt, black leather, 1-3/4" wide, waist size 30 to 46
BORE-CLEAN
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
BRUSH-45-10
Bore brush, bronze, for .45 caliber, 10-32 thread
CAPPER-P
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
FLASK-COLT
Powder Flask,
Colt pattern for Army & Navy revolvers,
accepts all spouts with 10-1mm threads
HOLSTER-MB-R
Military Holster, right hand,
black leather, plain flap
HOLSTER-WB-R
Western Holster, right hand, black leather,
8" barrel, for percussion Army and Navy revolvers
JB-44-8
Button jagged cleaning tip, .44 caliber, brass, 8-32 thread
NW-140
Nipple Wrench for Revolvers,
for .36 & .44 Colt Army & Navy Models,
and other revolvers with a large nipple recess.
OX-CLEAN-45C
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
OX-REV-44-SEAL
Ox-Yoke Revolver Wonder Seal, 100 seals for .44-.45 cal.
OX-WAD-44-W
.44/.45 caliber revolver Wonder Wad,
bag of 100 lubricated felt wads
PTC-PI
Nipple: 12-28 aka 5.5-.9mm metric thread ~many Uberti revolvers, most brands of pocket revolvers, Colt 2nd & 3rd Generation revolvers~ No. 11 CCI cap, hardened steel
PTC-PS
Nipple: 12-28 aka 5.5-.9mm metric thread ~many Uberti revolvers, most brands of pocket revolvers, Colt 2nd & 3rd Generation revolvers~ No. 11 CCI cap, stainless steel
TOOL-KEY-B
Drift Punch,
knurled brass,
for wedge keys and sights.
