This Thompson Center Hawken .50 caliber flint rifle was factory assembled. The stock has a few scattered handling marks and the brass has aged to a mellow patina. The barrel blue has been well maintained, but does have a few marks near the vent from the flint striking the edge and the frizzen rubbing it. The trigger reach is 14-1/4" and this .50 caliber rifle weighs 8.1 pounds.

The .50 caliber barrel is 15/16" octagon, 28" in length. The bore is rifled with a 1 in 48" twist to shoot both round balls and maxi balls with reasonable accuracy. The bore is bright and has been well maintained. The exterior barrel finish is in very good condition some some marks near the breech around the vent liner. The barrel is fitted with a blued steel bead front sight and Thompson Center elevation and windage adjustable rear sight.

The walnut stock has a satin finish with some minor handling marks. This early production gun has the tang pre-drilled to mount a Thompson Center peep, or tang sight. The triggerguard and buttplate have a mellow patina from age. The buttstock is shaped with a large oval cheek rest. The factory ramrod is fitted with brass tips and 10-32 threads for accessories.

The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, close the frizzen, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.

The color case hardened flint lock is factory engraved. The rifle is fitted with the factory saw cut flint. We recommend our best 5/8" hand knapped gun flints, for best performance in this lock. The frizzen has put a few rub marks on the barrel, from over tightening the lock bolt and pulling the lock into the barrel. Double lever double set triggers are well adjusted, to fire set or unset. The adjustment screw between the triggers allows even finer or coarser adjustment, as desired.

This Thompson Center Hawken Rifle is used with a few handling marks and a bright bore. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.