In as-new condition, this small rifle is very light weight, ideal for hunting. The flat rubber buttplate is ribbed for firm grip and minimum recoil in this .50 caliber percussion rifle. Fitted with sling swivels, for your 1" leather rifle sling. The stock is beech wood stained to a medium brown.
The 24" barrel is rifled with a 1 in 48" twist , for a .490 round ball or a conical ball. The adjustable fiber optic rear sight has a screw adjustment for windage, and a ramp adjustment for elevation. The red fiber optic front sight is fitted to a ramp.
Weight is 6.1 pounds. Trigger reach is 14-1/4" for an adult male. Easily shortened, the buttplate end is flat, where it mates the buttplate. Any gun shop that installs shotgun recoil pads can remove this buttplate, shorten it to fit your child, and dress the edge of the rubber buttplate to match the wood.
The small percussion lock is color case hardened. The thumb spur is tipped outboard, to allow this rifle to be fitted with a telescope sight, if desired. We prefer iron sights, required by most club match rules, and many state hunting laws. The barrel is also drilled and tapped to allow for a scope base. The holes are plugged with filler screws, which are easily removed.
The single trigger is fitted to a large bow triggerguard, to allow the use of gloved fingers during cold weather hunting. The hooked breech allows the barrel to be instantly dismounted, without tools, after removing the ramrod and barrel wedge key, with thumb pressure. The rifle is fitted with a synthetic ramrod with a tip for 10-32 loading and cleaning accessories.
This will make a great deer rifle for the upcoming season! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The 24" barrel is rifled with a 1 in 48" twist , for a .490 round ball or a conical ball. The adjustable fiber optic rear sight has a screw adjustment for windage, and a ramp adjustment for elevation. The red fiber optic front sight is fitted to a ramp.
Weight is 6.1 pounds. Trigger reach is 14-1/4" for an adult male. Easily shortened, the buttplate end is flat, where it mates the buttplate. Any gun shop that installs shotgun recoil pads can remove this buttplate, shorten it to fit your child, and dress the edge of the rubber buttplate to match the wood.
The small percussion lock is color case hardened. The thumb spur is tipped outboard, to allow this rifle to be fitted with a telescope sight, if desired. We prefer iron sights, required by most club match rules, and many state hunting laws. The barrel is also drilled and tapped to allow for a scope base. The holes are plugged with filler screws, which are easily removed.
The single trigger is fitted to a large bow triggerguard, to allow the use of gloved fingers during cold weather hunting. The hooked breech allows the barrel to be instantly dismounted, without tools, after removing the ramrod and barrel wedge key, with thumb pressure. The rifle is fitted with a synthetic ramrod with a tip for 10-32 loading and cleaning accessories.
This will make a great deer rifle for the upcoming season! Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, #11 CCI cap, stainless steel
- Cone length: 0.440"
- Thread journal length: 0.195"
- Overall length: 0.635"
- Diameter of base: 0.307"
Flush Nipple,
6-1mm thread for Spanish rifles,
stainless steel, 1/4" square shank for nipple wrench, with tubing,
fits CVA, Jukar, Traditions, Ardessa, Dikar
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Powder measure, brass, adjustable 0 to 120 grains, with spout
Nipple Wrench for Rifles, short style, with slotted end
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, wonder-lube
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Ramrod,
3/8" hickory, 36" long, brass tip, 10-32 thread
Made in the U.S.A.
Our Strongest Loading & Cleaning Rod,
5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken,
Creedmoor, rigid handle, 10-32 thread
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Patch puller worm, double tine, steel, 10-32 thread, made in the U.S.A.
CVA-S
Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, #11 CCI cap, stainless steel
Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
FLUSH-CVA
Flush Nipple,
6-1mm thread for Spanish rifles,
stainless steel, 1/4" square shank for nipple wrench, with tubing,
fits CVA, Jukar, Traditions, Ardessa, Dikar
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
RAMROD-C-29-10
Our Strongest Loading & Cleaning Rod,
5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken,
Creedmoor, rigid handle, 10-32 thread