This halfstock rifle was factory finished by InvestArms of Italy. The carbine is stocked in walnut with a checkered wrist and forearm. The buttstock has a factory installed rubber recoil pad. The rifle also has sling swivel studs for quick detachable sling swivels. This used rifle has many handling marks on the stock and some wear on the blue finish. The bore is mostly bright. The barrel is fitted with a fiber optic front sight and a T/C hunting peep sight. It would make a excellent choice for a hunting rifle. Trigger reach is 13-3/4" to fit today's man size shooter. Weight is 7.2 pounds.
The barrel is 15/16" octagon, blued steel, 22" long. The .50 caliber bore is rifled with a 1 in 48" twist for both patched round balls and conical bullets. The bore is mostly bright with a few scattered spots visible. A fiber optic front sight is fitted behind the muzzle. The barrel mounted rear sight has been removed and the mounting holes left unfilled. The tang is mounted with a Thompson Center brand peep sight.
The walnut stock is stained to a dark brown and the wrist and forearm are checkered to provide the shooter with a secure grip. The butt is fitted with a factory installed rubber recoil pad. The triggerguard is oxide finished aluminum. Sling swivel studs are fitted to the butt and ramrod pipe. The buttstock has an oval cheek for a right hand shooter.
The hooked breech, allows easy cleaning. Simply press out the wedge key, using thumb pressure, and remove the ramrod. Then lift the muzzle end, to unhook the breech plug from its tang. Remove the nipple, and insert the breech end into a bucket of hot soapy water, for easy cleaning. The barrel finish has a worn appearance with some discoloration.
The percussion lock is color case hardened, with modern coil spring geometry inside. This lock has a fly détente in the tumbler, for smooth action with the double lever double set triggers. The breech is fitted with a 6-.75mm threaded nipple. Order our #RLGP-S if you require a spare. The lock has a strong mainspring, and the set triggers are adjusted to allow you to cock the lock, or set the trigger, in any sequence.
Used with some handling marks, this rifle will make a handy hunting rifle. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The barrel is 15/16" octagon, blued steel, 22" long. The .50 caliber bore is rifled with a 1 in 48" twist for both patched round balls and conical bullets. The bore is mostly bright with a few scattered spots visible. A fiber optic front sight is fitted behind the muzzle. The barrel mounted rear sight has been removed and the mounting holes left unfilled. The tang is mounted with a Thompson Center brand peep sight.
The walnut stock is stained to a dark brown and the wrist and forearm are checkered to provide the shooter with a secure grip. The butt is fitted with a factory installed rubber recoil pad. The triggerguard is oxide finished aluminum. Sling swivel studs are fitted to the butt and ramrod pipe. The buttstock has an oval cheek for a right hand shooter.
The hooked breech, allows easy cleaning. Simply press out the wedge key, using thumb pressure, and remove the ramrod. Then lift the muzzle end, to unhook the breech plug from its tang. Remove the nipple, and insert the breech end into a bucket of hot soapy water, for easy cleaning. The barrel finish has a worn appearance with some discoloration.
The percussion lock is color case hardened, with modern coil spring geometry inside. This lock has a fly détente in the tumbler, for smooth action with the double lever double set triggers. The breech is fitted with a 6-.75mm threaded nipple. Order our #RLGP-S if you require a spare. The lock has a strong mainspring, and the set triggers are adjusted to allow you to cock the lock, or set the trigger, in any sequence.
Used with some handling marks, this rifle will make a handy hunting rifle. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
BALL-490
.490" round balls, pure lead, Hornady, per 100
BORE-CLEAN
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
BP-50-10
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
BRUSH-50-10
Bore brush, bronze, for .50 caliber, 10-32 thread
CAPPER-P
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
FS-50-10
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
JS-50-7-10
Jag, jagged cleaning tip, brass, .50 caliber, 7/16" rod, 10-32 thread
MAS-120
Powder measure, brass, adjustable 0 to 120 grains, with spout
NW-120
Nipple Wrench for Rifles & Shotguns,
slotted end for #11 nipple
OX-15-50-D
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
OX-CLEAN-58C
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
RAMROD-7-10-B
Ramrod,
7/16" hickory, 47" long, brass tip, 10-32 thread
Made in the U.S.A.
RLGP-S
Nipple, 6-.75mm metric thread, for Investarm Gemmer Hawken, Lyman Great Plains, Deerstalker, Trade Rifle #11 CCI cap, stainless steel
Cone length: 0.375" Thread journal length: 0.195" Overall length: 0.570" Diameter of base: 0.307"
ST-7
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
WORM-CORK-10
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
