Our Iroquois tomahawk head is wax cast of 4140 alloy steel. The 6-1/4" head has a 2-7/8" edge. The head is a precise wax casting, and will require deburring and polishing.
Deburr the front of the "poll" (hammer face), to remove the casting gage, using a few long strokes of a fine file. Polish the blade surfaces by hand, using fine emery paper or fine sandpaper, backed with a hard rubber or wooden block. Avoid using power wheels which give a modern "bright buffed" appearance.
Or brown it with our #BC-PBI-5 hot browning reagent.
Or blue it with out #VANS-BLUE instant cold bluing reagent.
Includes our 22" long hickory Carlos Gove pattern tomahawk handle with a swell along the bottom of the handle. Sanded smooth, this handle is ready for stain or oil finishing, if desired.
The eye is shaped with a flat poll with molded edges, engraved with an incised star burst design. The blade has an incised line and dashed border, with a traditional leaf design.
Made in the U.S.A. by Track of the Wolf, wax cast of tempered 4140 alloy steel, a few licks of a fine file, before each day's use, will keep the edge sharp.
Deburr the front of the "poll" (hammer face), to remove the casting gage, using a few long strokes of a fine file. Polish the blade surfaces by hand, using fine emery paper or fine sandpaper, backed with a hard rubber or wooden block. Avoid using power wheels which give a modern "bright buffed" appearance.
Or brown it with our #BC-PBI-5 hot browning reagent.
Or blue it with out #VANS-BLUE instant cold bluing reagent.
Includes our 22" long hickory Carlos Gove pattern tomahawk handle with a swell along the bottom of the handle. Sanded smooth, this handle is ready for stain or oil finishing, if desired.
The eye is shaped with a flat poll with molded edges, engraved with an incised star burst design. The blade has an incised line and dashed border, with a traditional leaf design.
Made in the U.S.A. by Track of the Wolf, wax cast of tempered 4140 alloy steel, a few licks of a fine file, before each day's use, will keep the edge sharp.
Related Products Shown Below
Tomahawk handle,
18" hickory,
for larger Tomahawks
All sizes are nominal. Please verify with description for more information.
-
Blade Material
- Carbon Steel
-
Cutting Edge Range
- 2.75" - 3.5"
-
Handle Material
- Hickory
-
Tomahawks & Axes
-
Tomahawks
- Throwing
-
Tomahawks