The extra length will give you a better grip on your ramrod.
Stuck ball? No powder? Our first technique is to "prime" the bore, feeding a small amount of FFFFg under the nipple or into the vent hole. Firing a tiny load is usually the easiest way to clear the bore.
Safety first! If the ball is stuck halfway down the barrel, do NOT try to fire the gun. Push the ball to the breech, first, and after every failed attempt to clear the bore. Else you may "ring" or bulge the bore.
Remove any cap, remove any flint, open the frizzen or place the percussion hammer down. Don't stand in front of a loaded gun!
Pull the ball? Pour two squirts of Track's Best Bore Clean down the bore. Allow it to soak 30 minutes, not longer. Decant the liquid, and pull the ball. Our Bore Clean Solvent will turn that hard crusty fouling into slippery lubricant, and wick it's way past the patch in 30 minutes or less.
Store this dandy 1817 pattern ball puller in your patch box, hunting pouch, or cartridge pouch. We recommend that you order the whole set: our #TOOL-TURN-U screwdriver, and our #WORM-1817-10-F.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
