This replica 1849 Colt Pocket Model revolver is .31 caliber with a five shot cylinder. This is a early import marked FIE Italy on the base of the grip. The barrel and cylinder are finished with a dark blue. The frame is brass and the loading lever is color case hardened in mottled colors. The triggerguard and grip strap are brass. This used revolver has a well aged patina on the brass.
The top of the 4" barrel is unmarked. The barrel is fitted with a small brass bead front sight. To maximize sight radius the hammer has a "V" notch to act as the rear sight. The cylinder is factory engraved with a stage coach scene. The walnut grips are correctly finished in the rich reddish brown color found on fine original Colt revolvers.
The brass triggerguard and backstrap have a mellow patina from long storage. The loading lever is color case hardened. The side of the frame is marked Italian proof marks, required by their law. The revolver is fitted with 12-24 threaded pocket model nipples. The nipples are new hardened steel nipple for No. 11 CCI percussion caps. Order our nipple PFIE-I if you require spares.
Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
The top of the 4" barrel is unmarked. The barrel is fitted with a small brass bead front sight. To maximize sight radius the hammer has a "V" notch to act as the rear sight. The cylinder is factory engraved with a stage coach scene. The walnut grips are correctly finished in the rich reddish brown color found on fine original Colt revolvers.
The brass triggerguard and backstrap have a mellow patina from long storage. The loading lever is color case hardened. The side of the frame is marked Italian proof marks, required by their law. The revolver is fitted with 12-24 threaded pocket model nipples. The nipples are new hardened steel nipple for No. 11 CCI percussion caps. Order our nipple PFIE-I if you require spares.
Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.
Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.
Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.
Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.
Nipple, 12-24 thread, used in some FIE marked 1849 Colt pocket model revolvers #11 CCI cap, hardened steel
- Cone length: 0.240"
- Thread journal length: 0.225"
- Overall length: 0.465"
- Diameter of base: 0.275" (this small diameter requires grinding the wrench outside diameter to fit)
BALL-323-X
.323" round balls, pure lead, hand cast, per 100
BC-CTL
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
BORE-CLEAN
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
BORE-MOP-32-10
Bore mop, 100% Cotton, for .32 caliber, 10-32 thread, washable
BRUSH-32-10
Bore brush, bronze, for .32 caliber, 10-32 thread
CAPPER-P
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
FLASK-HS
Cylindrical Brass Powder Flask,
2-3/4" length, 1-1/4" diameter
accepts 10-1mm threaded spouts
FLASK-POCKET
Powder Flask,
for Colt Pocket Model Revolver,
copper, with embossed Eagle motif,
accepts 8-.75mm threaded spouts
FLASK-UNUM
Powder Flask, Colt style Unum Flask
accepts 8-.75mm threaded spouts
NW-130
Nipple Wrench for Revolvers,
for 1858 Remington .44 Revolver,
.31 & .36 Pocket & Police Model Colt Revolvers,
and other revolvers with a tight nipple recess
OX-CLEAN-27C
Cleaning Patches, 1-1/4" diameter, bag of 100, pure cotton flannel, for .22 to .27 caliber
OX-WAD-31-D
.30/.31 caliber revolver Wool Wad,
bag of 100 dry felt wads
OX-WAD-31-W
.30/.31 caliber revolver Wonder Wad,
bag of 100 lubricated felt wads
PFIE-I
Nipple, 12-24 thread, used in some FIE marked 1849 Colt pocket model revolvers #11 CCI cap, hardened steel
Cone length: 0.240" Thread journal length: 0.225" Overall length: 0.465" Diameter of base: 0.275" (this small diameter requires grinding the wrench outside diameter to fit)
PICK-NIPPLE
Spring steel nipple pick,
with bone bead handle
SHOT-00
Buckshot #00
.330" round balls, lead,
by Hornady, 5 pounds
SP-015
Flask Spout, 15 grains,
10-1mm standard thread
fits replica flasks from Italy,
solid brass, made in the U.S.A.
TOOL-KEY-B
Drift Punch,
knurled brass,
for wedge keys and sights.
Adobe Reader required to view the files below.
uberti-percusion-revolver-manual.pdf
Last updated: 9/30/2025 (281 KB)