Known as the COLT Model 1860 Army revolver, this revolver is beautifully finished, with a blued round barrel, fancy full fluted cylinder, color case hardened frame and loading lever, blued steel back-strap, brass triggerguard, and reddish brown walnut grips. This second generation revolver appears to have been cocked and disassembled previously, but it does not display any heavy wear. It dos not have a factory box.

This revolver has both the fancy full fluted cylinder, for lightest weight, and the four screw frame, which will accept the Cavalry shoulder stock accessory, sold elsewhere. This revolver has a few small marks on the cylinder from the latch. The wedge key also has a bright spot from disassembly.

Should you decide to fire this revolver. Each chamber will hold 30 grains of FFFg powder. We recommend .454" balls, and 20 grains of GOEX FFFg powder, for best accuracy and best compression. Cover each ball with a small amount of our #LUBE-SPG bullet lubricant grease. Despite your best efforts, this revolver will need to be cleaned after 12 or 18 shots. Remove the wedge, barrel, and cylinder. Wipe the face of the cylinder, and wipe the cylinder pin. If you continue to load and fire a badly fouled revolver, the effort needed to cock and fire the gun will become greater, causing the small internal hand, spring, and cylinder latch to become worn and slightly damaged. Continued abuse will cause the cylinder and latch to become out-of-time. Simple cleaning and maintenance will prevent problems. Prized by collectors, this pistol was made to be a precision shooter.

The .44 caliber, 8" barrel is fitted with blade front sight. The rear sight is a notch in the hammer. The barrel is marked ~ ADDRESS SAML COLT NEW-YORK CITY ~ on the top. The revolver has a blued steel backstrap. The brass triggerguard has aged to a mellow patina from long storage. The loading lever is attractively color case hardened. The front edge of the color case hardened frame is stamped Colt's Patent U.S. below the front of the cylinder. The brass triggerguard is marked .44 cal.

Order this nice percussion revolver for inspection, if not delighted, return it in unspun, unfired condition. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.